JUNOSe 11.1.x Command Reference Guide A to M
ip nat outside source list
ip nat outside source list accessListName pool poolName
Syntax
no ip nat outside source list accessListName
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates dynamic translation rules that are applied to a source address when routing
Description
a packet from the outside network to the inside network, and used for translating
the destination address when a packet returns to the outside network from the inside
network. The no version removes the dynamic translation rule.
NOTE: This command does not remove any dynamic translations from the translation
table.
Options
Global Configuration
Mode
874
ip nat outside source list
accessListName Name of the access list that you want to use for this dynamic
translation
poolName Name of the NAT IP address pool that contains addresses you want
to use when translating matched access list addresses