Dont-Install-Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

dont-install-routes

[ no ] dont-install-routes
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Prevents OSPF routes that point directly to the OSPF remote neighbor from being
Description
installed in the IP routing table of the VR or VRF in which OSPF is running. The no
version restores the default behavior, which installs the routes in the IP routing table.
Remote Neighbor Configuration
Mode
546
dont-install-routes