Exec-Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

exec-timeout

exec-timeout minutes [ seconds ]
Syntax
no exec-timeout
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the time interval that the console or vty line waits for expected user input. The
Description
no version restores the default value, which is no time limit.
Options
Line Configuration
Mode
minutes—Number of minutes for the time limit; in the range from 0 to 35791
seconds Number of seconds in addition to the minutes for the time limit; in the
range from 0 to 2147483
Chapter 6: E Commands
613
exec-timeout