Ip Vrf - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip vrf

ip vrf vrfName
Syntax
no ip vrf vrfName [ wait-for-completion [ waitSeconds ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a VRF or accesses VRF Configuration mode to configure a VRF. The no version
Description
deletes the VRF.
NOTE: After creating the VRF, you must configure a route distinguisher for it via the
rd command; otherwise, the VRF will not operate.
Options
Global Configuration
Mode
970
ip vrf
vrfName Name of the VRF; a string of 1–32 alphanumeric characters
wait-for-completion Specifies (in the absence of waitSeconds) that the CLI waits
for completion of the no version operation before it returns a prompt, regardless
of how long that takes
waitSeconds—Number of seconds in the range 1–64000 that the CLI waits before
it returns a prompt, regardless of whether the no version operation has completed