Mpls Traffic-Eng Attribute-Flags - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls traffic-eng attribute-flags

mpls traffic-eng attribute-flags bitmask
Syntax
no mpls traffic-eng attribute-flags
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies attributes for the interface for traffic engineering. The attributes are
Description
compared with tunnel affinity bits to determine links eligibility for the tunnel. The
no version restores the default value, 0x0.
Options
Interface Configuration, Subinterface Configuration
Mode
1428
mpls traffic-eng attribute-flags
bitmask Mask that sets the attributes, a value in the range 0x0–0xFFFFFFFF