Chapter 13: M Commands
mpls lsp retries
mpls lsp retries retryNum
Syntax
no mpls lsp retries
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of attempts that will be made to set up an LSP for RSVP-TE
Description
after a failure other than one due to no available route. The no version restores the
default value, 0, which means the attempts will be made until successful.
retryNum Number of retry attempts in the range 0–65535
Options
Global Configuration
Mode
1385
mpls lsp retries