JUNOSe 11.1.x Command Reference Guide A to M
ipv6 pim rp-address
[ no ] ipv6 pim rp-address ipv6Address [ ipv6AccessList ] [ override ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a static PIM group–to–RP mapping. The no version clears the mapping
Description
from this interface.
Options
Global Configuration
Mode
1096
ipv6 pim rp-address
ipv6Address IPv6 address of the router you want to designate as an RP router
ipv6AccessList Name of the IPv6 access list that specifies which multicast groups
use this RP
override Specifies that this static RP mapping has priority over group-to-RP
mappings learned by auto-RP