Ip Ospf Message-Digest-Key Md5 - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip ospf message-digest-key md5

ip ospf message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey
Syntax
no ip ospf message-digest-key keyID
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables OSPF MD5 authentication and configures the MD5 key. The no version
Description
deletes an MD5 key.
NOTE: If all the MD5 keys have been deleted, the authentication type is still MD5,
but you must configure MD5 keys.
To disable MD5 authentication for the interface, use the ip ospf authentication-none
command.
To display the password only in encrypted text, use the service password-encryption
command.
Options
Interface Configuration, Subinterface Configuration
Mode
888
ip ospf message-digest-key md5
keyID Key identifier in the range 1–255
md5 Specifies use of the MD5 algorithm
0 Indicates the msgDigestKey is entered in unencrypted form (plaintext); this
is the default option
8 Indicates the msgDigestKey is entered in encrypted form (ciphertext)
msgDigestKey OSPF password; string of up to 16 alphanumeric characters