Ipv6 Mld Group Limit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 mld group limit

ipv6 mld group limit groupLimit
Syntax
no ipv6 mld group limit
Command introduced before JUNOSe Release 7.1.0.
Release Information
Limits the number of MLD groups that an interface can accept. The no version restores
Description
the default situation, in which there is no limit to the number of MLD groups that
the interface accepts.
Options
Interface Configuration, Profile Configuration
Mode
groupLimit Maximum number of MLD groups that an interface can accept, in
the range 0–64,000
Chapter 10: I Commands
1041
ipv6 mld group limit