Mpls Rsvp Egress-Label - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls rsvp egress-label

mpls { rsvp | traffic-eng } egress-label { non-null | explicit-null }
Syntax
no mpls { rsvp | traffic-eng } egress-label
Command introduced in JUNOSe Release 7.3.0.
Release Information
Specifies that the egress router advertises the explicit null label or a non-null (real)
Description
label by means of RSVP-TE. This advertisement ensures that packets received from
upstream include a label and that the egress router performs ultimate hop popping.
The no version restores the default condition, where the egress router advertises the
implicit null label for all tunnels (except those requiring PHB) that terminate on the
router.
Options
Global Configuration
Mode
1408
mpls rsvp egress-label
rsvp Specifies JUNOSe implementation
traffic-eng Specifies keyword for compatibility with non–E Series
implementations
non-null Advertises a real label, signaling that the egress router pops the last
label and performs the IP lookup; this behavior was the default before this release
explicit-null Advertises the explicit null label, signaling that the egress router
pops the last label and performs the IP lookup