Ip Pim Query-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip pim query-interval

ip pim query-interval queryTime
Syntax
no ip pim query-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Profile Configuration mode added in JUNOSe Release 8.2.0.
Specifies how often the router sends PIM router query messages from this interface.
Description
The no version specifies the default time interval, 30 seconds.
Options
Interface Configuration, Profile Configuration
Mode
902
ip pim query-interval
queryTime Interval in the range 0–210 seconds at which the router sends PIM
router query messages from this interface