L2Tp Dial-Out Target - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

l2tp dial-out target

l2tp dial-out target ipAddress ipAddressMask domainName profile profileName
Syntax
no l2tp dial-out target ipAddress ipAddressMask
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an L2TP dial-out target that enables the creation of a dial-out session. The
Description
no version removes the L2TP dial-out route or target.
Options
Global Configuration
Mode
ipAddress IP address of the target
ipAddressMask IP address mask of the target
domainName Domain name to be used in the outgoing call Access-Request
message
profileName Name of profile to be used in the creation of the interface stack
Chapter 12: L Commands
1169
l2tp dial-out target