Hdlc Dos-Protection-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

hdlc dos-protection-group

hdlc dos-protection-group groupName
Syntax
no hdlc dos-protection-group
Command introduced in JUNOSe Release 8.1.0.
Release Information
Attaches an HDLC denial of service (DoS) protection group to an interface. The no
Description
version removes the attachment of the DoS protection group from the interface.
Options
Interface Configuration
Mode
682
hdlc dos-protection-group
groupName Name of the DoS protection group; string of up to 31 alphanumeric
characters