Ip Igmp Robustness - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip igmp robustness

ip igmp robustness numberOfMessages
Syntax
no ip igmp robustness
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the number of times that the router sends IGMP group-specific queries
Description
before declaring a group to no longer have any members on an interface. The no
version restores the default value, 3.
Options
Interface Configuration, Profile Configuration
Mode
834
ip igmp robustness
numberOfMessages Number of times that the router sends IGMP group-specific
queries in the range 1–4