Mpls-Relay Disable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls-relay disable

[ no ] mpls-relay disable
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Administratively disables the MPLS shim interface. The MPLS shim interface must
Description
exist before this command can be issued. MPLS shim interfaces are administratively
enabled by default. The no version restores the default condition.
Interface Configuration
Mode
1400
mpls-relay disable