Ip Dos-Protection-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip dos-protection-group

ip dos-protection-group groupName
Syntax
no ip dos-protection-group
Command introduced in JUNOSe Release 8.1.0.
Release Information
Attaches an IP denial of service (DoS) protection group to an interface. The no version
Description
removes the attachment of the DoS protection group from the interface.
Options
Interface Configuration
Mode
784
ip dos-protection-group
groupName Name of the DoS protection group; string of up to 31 alphanumeric
characters