Ipv6 Multicast-Routing Permanent-Mroute - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 multicast-routing permanent-mroute

ipv6 multicast-routing permanent-mroute accessListName
Syntax
no ipv6 multicast-routing permanent-mroute
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that newly created mroutes that match the specified access-list do not get
Description
timed out. The no version of this command prevents any new mroutes from becoming
permanent. However, it does not remove any existing permanent mroutes. To remove
existing permanent mroutes, use the clear ipv6 mroute command.
Options
Global Configuration
Mode
1064
ipv6 multicast-routing permanent-mroute
accessListName Name of the IPv6 access list that specifies the mroutes