Ip Pim Send-Rp-Discovery Scope - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip pim send-rp-discovery scope

ip pim send-rp-discovery scope ttl [ interfaceType interfaceSpecifier ]
Syntax
no ip pim send-rp-discovery
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the router as an RP mapping agent, which records RP-to-group mappings
Description
and notifies PIM DRs about the mappings. The no version stops the router from
acting as an RP mapping agent.
Options
Global Configuration
Mode
906
ip pim send-rp-discovery scope
ttl Time-to-live value; number of hops for which the RP discovery message is
valid. Specify a value that covers the PIM domain.
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see "Interface Types and Specifiers" on page 5. If you specify an interface, the
autoRP discovery messages will contain the IP address for this interface.