Include Circuit-Identifier - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

include circuit-identifier

include circuit-identifier circuitType [ prepend-circuit-type ]
Syntax
no include circuit-identifier
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that the circuit identifier is included when the router automatically generates
Description
a username for an IP service profile. The no version disables inclusion of the circuit
identifier.
Options
IP Service Profile Configuration
Mode
710
include circuit-identifier
circuitType—Type of circuit; atm or vlan
prepend-circuit-type Specifies that the circuit type is included in the username