Ip Nat Inside Source Static - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip nat inside source static

[ no ] ip nat inside source static localIpAddress globalIpAddress
Syntax
[ no ] ip nat inside source static { tcp | udp } localIpAddress localPort globalIpAddress
globalPort
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates static translations for a source address when routing a packet from the inside
Description
network to the outside network, and " untranslates" the destination address when
a packet returns from the outside network to the inside network. The no version
removes the static translation and purges the associated translations from the
translation table.
Options
Global Configuration
Mode
tcp Indicates a TCP port
udp Indicates a UDP port
localIpAddress Inside local address
localPort Inside local TCP or UDP port
globalIpAddress Inside global address
globalPort Inside global TCP or UDP port
Chapter 10: I Commands
ip nat inside source static
873