Ipv6 Router Isis - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 router isis

[ no ] ipv6 router isis [ tag ]
Syntax
Command introduced in JUNOSe Release 8.2.0.
Release Information
Enables the IS-IS routing protocol on an interface and specifies an IS-IS process for
Description
IPv6. The no version disables IS-IS routing.
Options
Interface Configuration
Mode
1110
ipv6 router isis
tag Meaningful name for a routing process; name must be unique among all
IP router processes for a given router; if not specified, a null tag is assumed, and
the process is referenced with a null tag