Ipv6 Description - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 description

ipv6 description name
Syntax
no ipv6 description
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a text description or an alias to an IPv6 interface or subinterface. Use the
Description
show ipv6 interface command to display the text description. The no version
removes the description or alias.
name Name for the IP interface; string of up to 256 characters
Options
Interface Configuration, Subinterface Configuration
Mode
1021
ipv6 description