Table of Contents
Advertisement
JUNOSe 11.1.x Command Reference Guide A to M
match route-type
match route-type internal [ intra | inter ] [ level-1 | level-2 ]
Syntax
[ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type external [ type-1 | type-2 ] [ level-1 | level-2 ]
[ internal [ intra | inter ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ internal [ intra | inter ] ]
[level-1 | level-2 ] [ external [ type-1 | type-2 ] ] [ level-1 | level-2 ]*
match route-type { level-1 | level-2 } [ external [ type-1 | type-2 ] ]
[ level-1 | level-2 ] [ internal [ intra | inter ] ] [ level-1 | level-2 ]*
no match route-type [ internal [ intra | inter ] | external [ type-1 | type-2 ] |
level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches routes of the specified type. The no version removes the match clause from
Description
a route map unless you specify a value, in which case only that value is removed
from the match clause.
Options
Policy List Configuration, Route Map Configuration
Mode
1290
match route-type
internal Specifies internal routes
intra—OSPF intra-area routes
inter—OSPF interarea routes
external Specifies external routes
type-1 OSPF type 1 external routes
type-2 OSPF type 2 external routes
level-1 Specifies IS-IS level 1 routes
level-2 Specifies IS-IS level 2 routes
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Advertisement
Table of Contents
