Ip-Address-Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip-address-pool

ip-address-pool poolName
Syntax
no ip-address-pool
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the IP address pool parameter for a user entry in the local user database.
Description
The address pool is used to assign an IP address to the subscriber. The no version
deletes the IP address pool parameter from the user entry in the local user database.
poolName Name of IP address pool
Options
Local User Configuration
Mode
741
ip-address-pool