Metric - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

metric

metric globalDefault [ level-1 | level-2 ]
Syntax
no metric [ level-1 | level-2 ]
Command introduced in JUNOSe Release 9.0.0.
Release Information
Sets the metric to the same value for all active IS-IS IPv4 and IPv6 interfaces at the
Description
specified level. If you do not specify level 1 routers or level 2 routers, then the metric
is applied to both level 1 and level 2 routers. The no version restores the individual
default value, 10.
Options
Router Configuration
Mode
1316
metric
globalDefault Metric used for all IS-IS interfaces; a number in the range
1–16777215; overridden by the isis metric command
level-1 Configuration applies only to level 1 routing
level-2 Configuration applies only to level 2 routing