Ipsec Key Pubkey-Chain Rsa - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipsec key pubkey-chain rsa

[ no ] ipsec key pubkey-chain rsa { address ipAddress | name identityString }
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables you to configure the public key for a remote peer with which you want to
Description
establish IKE SAs. This command accesses IPSec Peer Public Key Configuration mode,
from which you can enter the peer public key data without the need for a digital
certificate. Public keys are used during the tunnel establishment phase when the
ISAKMP/IKE policy specifies RSA digital signature authentication. The no version
removes the peer public key from the router.
Options
Global Configuration
Mode
ipAddress IP address of the peer for which the public key can be used, in 32-bit
dotted decimal format (for example, 192.168.32.2)
identityString Identity of the remote peer for which the public key can be used,
either in fully qualified domain name (FQDN) format (for example,
group003.customer535.isp.net) or in FQDN format preceded by an optional
user@ specification (for example, tsmith@group003.customer535.isp.net);
maximum of 80 characters
Chapter 10: I Commands
ipsec key pubkey-chain rsa
1003