Ip Pim Group-Address-Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip pim group-address-pool

ip pim group-address-pool poolName groupAddressMinimum groupAddressMaximum
Syntax
no ip pim group-address-pool poolName
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures PIM group address pools from which data MDT group addresses are
Description
allocated. The no version removes the group address pool.
Options
Global Configuration
Mode
poolName Name of the group address pool
groupAddressMinimum Minimum value in the group address range
groupAddressMaximum Maximum value in the group address range
Chapter 10: I Commands
ip pim group-address-pool
899