Ip Pim Join-Filter - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip pim join-filter

ip pim join-filter accessListName
Syntax
no ip pim join-filter
Command introduced before JUNOSe Release 7.1.0.
Release Information
Profile Configuration mode added in JUNOSe Release 8.2.0.
Specifies an extended access list that you want this PIM interface to use as a join
Description
filter. If an interface-level filter exists, it takes precedence over the global-level filter.
The no version removes the filter association.
Options
Global Configuration, Interface Configuration, Profile Configuration
Mode
900
ip pim join-filter
accessListName Name of the access list that you want this interface to use as
a PIM join filter; a string of up to 32 alphanumeric characters