Mpls Copy-Upc-To-Exp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls copy-upc-to-exp

[ no ] mpls copy-upc-to-exp
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets the initial value of the EXP bits in pushed or swapped labels to the user packet
Description
class value associated with the packets. This command does not modify EXP bits in
labels already in the received MPLS packet. The no version restores the default
condition, where the EXP bits are set to 000 (for non-MPLS/IP traffic) or to the IP
precedence value from the TOS field of the IP packet header (for IP traffic).
Global Configuration
Mode
1344
mpls copy-upc-to-exp