Exceeded-Action - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

exceeded-action

For IP and IPv6 rate-limit profiles:
Syntax
[ no ] exceeded-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] exceeded-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] exceeded-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] exceeded-action { drop | transmit [ conditional | final ] }
Command introduced before JUNOSe Release 7.1.0.
Release Information
conditional and final keywords added in JUNOSe Release 7.2.0.
Sets the action for packets not conforming to the committed rate and committed
Description
burst size, and not conforming to the peak rate and peak burst size. The no version
restores the default, drop.
Options
Rate Limit Profile Configuration
Mode
Related Topics
drop Drops the packet
transmit Transmits the packet; for hierarchical rate limits:
conditional Packets must pass the next rate limit
final Packets exit the hierarchy at rate limit
markVal Marks value in the range 0–255; mark actions ar not supported on
hierarchical rate limits
expValue EXP bit value in the range 0–7
Creating a Two-Rate Rate-Limit Profile
Chapter 6: E Commands
597
exceeded-action