Ip Route-Map Ip-Subscriber - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip route-map ip-subscriber

ip route-map ip-subscriber routeMapName
Syntax
no ip route-map ip-subscriber
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures an interface for route-map processing and specifies the route map that
Description
is applied to the IP interface subscriber. If no route map is specified, then all packets
will trigger the creation of a dynamic subscriber interface. The no version deletes
the route map.
Options
Interface Configuration, Profile Configuration
Mode
932
ip route-map ip-subscriber
routeMapName Name of route map