Extended-Authentication - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

extended-authentication

extended-authentication { none | pap | chap } [ re-authenticate ]
Syntax
[ skip-peer-config ]
no extended-authentication
Command introduced in JUNOSe Release 7.3.0.
Release Information
Specifies the extended user authentication protocol for use during the extended user
Description
authentication protocol exchange. The re-authenticate keyword enables the
reauthentication option (a second authentication procedure). The skip-peer-config
keyword disables the router from configuring peer IP characteristics. The no version
restores the default protocol, pap.
Options
IPSec Tunnel Profile Configuration
Mode
622
extended-authentication
none Specifies that no extended authentication is performed
pap Specifies the use of PAP protocol for extended authentication
chap Specifies the use of CHAP protocol for extended authentication
re-authenticate Enables reauthentication when IKE SA rekeying occurs
skip-peer-config Disables configuration of peer IP characteristics