Key - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

key

To assign a RADIUS key:
Syntax
key secret
no key
To assign a RADIUS relay key:
key ipAddress ipMask relaySecret
no key ipAddress ipMask
To assign an ISAKMP/IKE key:
key keyString
no key
Command introduced before JUNOSe Release 7.1.0.
Release Information
From RADIUS Configuration mode, specifies the secret for the RADIUS authentication,
Description
accounting, dynamic-request server, or preauthentication server that is used to
calculate the RADIUS authenticator field during exchanges with the RADIUS server.
The no version removes the secret and causes the router to drop all requests for the
RADIUS client.
From RADIUS Relay Configuration mode, specifies the IP address and mask of the
network that will use the relay authentication or accounting server, and the secret
used during exchanges between the RADIUS relay server and client. The no version
removes the secret.
From IPSec Manual Key Configuration mode, configures a manual ISAKMP/IKE
preshared key. There is no no version. To delete a key, use the no version of the
ipsec key manual command.
Options
IPSec Manual Key Configuration, RADIUS Configuration, RADIUS Relay Configuration
Mode
1146
key
secret Authentication, accounting, dynamic-request, or preauthentication server
secret text string used by RADIUS to encrypt the client and server authenticator
field during exchanges between the router and a RADIUS server. The router
encrypts PPP PAP passwords using this text string.
ipAddress IP address for client network
ipMask IP mask for the client network
relaySecret Text string; up to 32 characters
keyString Key value in ASCII format; up to 200 characters