Ipsec Tunnel Profile - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipsec tunnel profile

ipsec tunnel profile profileName [ virtual-router vrName ]
Syntax
no ipsec tunnel profile profileName
Command introduced in JUNOSe Release 7.3.0.
Release Information
Creates or configures a tunnel profile for IPSec and accesses the IPSec Tunnel Profile
Description
Configuration mode (config-ipsec-tunnel-profile). The no version deletes the tunnel
profile.
Options
Global Configuration
Mode
1012
ipsec tunnel profile
profileName Name of the tunnel profile
vrName Name of the VR on which you want to create the profile. If you do not
specify a virtual router, the current virtual router context is used