Hello-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

hello-interval

hello-interval helloInterval
Syntax
no hello-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the interval between hello packets that the router sends on the OSPF
Description
remote-neighbor interface. The no version restores the default value.
Options
Remote Neighbor Configuration
Mode
688
hello-interval
helloInterval Number in the range 1–65535 seconds; default value is 10 seconds