Ipv6 Pim Sparse-Mode Graceful-Restart-Duration - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 pim sparse-mode graceful-restart-duration

ipv6 pim sparse-mode graceful-restart-duration seconds
Syntax
no ipv6 pim sparse-mode graceful-restart-duration
Command introduced in JUNOSe Release 10.0.0.
Release Information
Sets duration time for PIM sparse-mode graceful restart. The no version resets the
Description
duration to the default.
seconds Restart duration in seconds; default value is 30 seconds
Options
Global Configuration
Mode
1099
ipv6 pim sparse-mode graceful-restart-duration