Ip Dhcp-External Auto-Configure - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip dhcp-external auto-configure

[ no ] ip dhcp-external auto-configure [ agent-circuit-identifier ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
agent-circuit-identifier keyword added in JUNOSe Release 7.3.0.
Configures the E Series router to automatically create the user's DSI. This command
Description
is specific to a virtual router. The no version disables the autoconfigure feature.
Options
Global Configuration
Mode
agent-circuit-identifier Creates dynamic subscriber interfaces built over dynamic
VLANs that are based on the agent-circuit-id option (suboption 1) of the option
82 field in DHCP messages.
Chapter 10: I Commands
ip dhcp-external auto-configure
763