Ipv6 Ospf Mtu-Ignore - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 ospf mtu-ignore

[ no ] ipv6 ospf [ processId ] mtu-ignore
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies that the interface ignore the MTU size contained in the DBD packet. The
Description
interface accepts data description packets from its neighbor even if it has a different
a MTU size. However, the MTU size must be less than 18000. The no version resets
the default; that the neighbor MTU size must match the MTU size of the OSPFv3
interface from which the packet is received.
Options
Interface Configuration, Subinterface Configuration
Mode
1084
ipv6 ospf mtu-ignore
processId Integer in the range 1–65535