Ipv6 Mtu - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mtu

ipv6 mtu [ mtuSize ]
Syntax
no ipv6 mtu
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum transmission unit size of IPv6 packets sent on an interface. The
Description
no version restores the default value.
Options
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
1058
ipv6 mtu
mtuSize—Maximum number of packet transmissions permitted on an interface;
in the range 160–10240; default value is 0, which means that the router takes
the value from a lower protocol layer