Exec-Banner - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

exec-banner

[ no | default ] exec-banner
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Controls display of an exec banner (configured with the banner command) on a
Description
particular line after user authentication (if any) and before the first prompt of a CLI
session. The no version disables the exec banner and the motd banner on the line.
The default version restores the default setting, in which the banner is enabled on
all lines.
Line Configuration
Mode
612
exec-banner