Ethernet Oam Lfm High-Threshold - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ethernet oam lfm high-threshold

[ no ] ethernet oam lfm high-threshold { disable-interface | failover }
Syntax
Command introduced in JUNOSe Release 11.1.0.
Release Information
Configures a specific action to occur when a high threshold for an error is exceeded
Description
on an Ethernet OAM interface. The no version removes the high-threshold action
from the interface of the local OAM client and causes no action to be performed
when local errors occur on the interface.
Options
Interface Configuration
Mode
Related Topics
582
ethernet oam lfm high-threshold
disable-interface Sets the OAM functionality to unconditionally attempt to
influence the operational state of the interface to down. If the interface is a
member link of a LAG bundle and at least one other viable link (redundant
member or another active/up link) is present, OAM attempts to influence the
operational state of the link to down. Otherwise, no action is taken
failover On GE-2 and GE-HDE line modules with GE-2 SFP I/O modules with
physical link redundancy, causes the link to transition from active to redundant
OAM Link Monitoring Feature
Configuring 802.3ah OAM Link-Fault Management
Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote
Failure Monitoring on an Interface