Diag - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

diag

diag slotNumber [ subsystem ] [ force ]
Syntax
Command introduced in JUNOSe Release 7.3.0.
Release Information
Reboots the SRP module or line module in the specified slot on all E Series routers
Description
and performs diagnostic tests. There is no no version.
Options
Privileged Exec
Mode
516
diag
slotNumber Number of the chassis slot that contains the SRP module or line
module
subsystem Type of subsystem on the E120 router or the E320 router; use when
the specified slotNumber is a slot that contains an SRP module
srp Indicates the system controller (SC) on one or both SRP modules; specify
this keyword to restart only the portion of the SC on the individual SRP
module
fabric Indicates the portion of the switch fabric on the SRP modules; specify
this keyword to restart only an individual fabric slice
force Specifies that the system manually confirm conflicting conditions when
the slot of the active SRP module is specified