Frame-Relay Lmi-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

frame-relay lmi-type

frame-relay lmi-type type
Syntax
no frame-relay lmi-type
Command introduced before JUNOSe Release 7.1.0.
Release Information
Selects the LMI type. The no version restores the default value.
Description
Options
Interface Configuration
Mode
Related Topics
type One of the following types:
ansi ANSI T1.617 Annex D
cisco Original Group of Four specification developed by DEC, Northern
Telecom, Stratacom, and Cisco
q933a ITU-T Q.933 Annex A
none No management interface is used
Configuring Frame Relay Layer 2 Services in the JUNOSe BGP and MPLS
Configuration Guide
Chapter 7: F Commands
655
frame-relay lmi-type