Dead-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 5: D Commands

dead-interval

dead-interval deadInterval
Syntax
no dead-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the time period that the OSPF router waits without seeing hello packets from a
Description
remote neighbor before declaring the neighbor to be down. The no version restores
the default value.
deadInterval Number in the range 1–65535 seconds; default value is 40 seconds
Options
Remote Neighbor Configuration
Mode
477
dead-interval