Ip Re-Authenticate-Auto-Detect Ip-Subscriber - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip re-authenticate-auto-detect ip-subscriber

ip re-authenticate-auto-detect ip-subscriber
Syntax
no ip re-authenticate-auto-detect ip-subscriber
Command introduced in JUNOSe Release 10.0.0.
Release Information
Re-authenticates the auto-detected subscribers (dynamic subscriber interfaces) created
Description
on static and dynamic IP subscriber interfaces using the DHCP options dhcp-options,
dhcp-gi-address, and dhcp-mac-address when the DHCP external application
manages the subscriber addresses following a cold boot. The no version negates the
command or restores the defaults.
Interface Configuration, Profile Configuration
Mode
919
ip re-authenticate-auto-detect ip-subscriber