Download Print this page

Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

For e series broadband services routers - command reference a to m

Table Of Contents

page of 1506

/ 1506
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual

JUNOSe

Software

for E Series

Broadband Services Routers

Command Reference A to M

Release 11.1.x

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Published: 2010-04-09

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010

Page 1 JUNOSe Software for E Series Broadband Services Routers Command Reference A to M Release 11.1.x Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Published: 2010-04-09...
Page 2 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
Page 3 AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS. 1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”)
Page 4 (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 http://www.gnu.org/licenses/gpl.html...
Page 5 agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained herein.
Page 7 Abbreviated Table of Contents About the Documentation xxxix Part 1 Commands, A to M Chapter 1 Command Reference Topics Chapter 2 A Commands Chapter 3 B Commands Chapter 4 C Commands Chapter 5 D Commands Chapter 6 E Commands Chapter 7 F Commands Chapter 8 G Commands...
Page 8 JUNOSe 11.1.x Command Reference Guide A to M viii...
Page 9: Table Of Contents
Table of Contents About the Documentation xxxix E Series and JUNOSe Documentation and Release Notes ......xxxix Audience ....................xxxix E Series and JUNOSe Text and Syntax Conventions ........xxxix Obtaining Documentation ................xli Documentation Feedback ................xli Requesting Technical Support ................xli Self-Help Online Tools and Resources ............xlii Opening a Case with JTAC ..............xlii Part 1 Commands, A to M...
Page 10 JUNOSe 11.1.x Command Reference Guide A to M aaa delimiter ....................39 aaa dhcpv6-delegated-prefix delegated-ipv6-prefix ........40 aaa dns ......................41 aaa domain-map ...................42 aaa duplicate-address-check ................43 aaa intf-desc-format include ................44 aaa ipv6-dns ....................45 aaa ipv6-nd-ra-prefix framed-ipv6-prefix ............46 aaa local database ..................47 aaa local select database ................48 aaa local username ..................49 aaa new-model ....................50 aaa parse-direction ..................51...
Page 11 Table of Contents address cost ....................93 address dead-interval ..................94 address-family ....................95 address hello-interval ..................97 address message-digest-key md5 ..............98 address network ....................99 address passive-interface ................100 address-pool-name ..................101 address priority ...................102 address receive version ................103 address retransmit-interval ................104 address send version ...................105 address transmit-delay ................106 adjustment-factor ..................107 agent context-name ..................108...
Page 12 JUNOSe 11.1.x Command Reference Guide A to M atm ......................147 atm aal5 description ..................148 atm aal5 shutdown ..................149 atm aal5 snmp trap link-status ..............150 atm atm1483 advisory-rx-speed ..............151 atm atm1483 auto-configure ...............152 atm atm1483 description ................153 atm atm1483 export-subinterface-description ..........154 atm atm1483 mtu ..................155 atm atm1483 profile ...................156 atm atm1483 shutdown ................157...
Page 13 Table of Contents authorization ....................200 authorization change ...................201 auth-router-name ..................202 auto-configure .....................203 auto-configure atm1483 ................204 auto-configure vlan ..................205 auto-cost reference-bandwidth ..............206 automatic-virtual-link ..................207 auto-summary .....................208 average-length-exponent ................209 avp ......................210 Chapter 3 B Commands backup-address-pool-name ................212 bandwidth ....................213 bandwidth oversubscription ................214 banner ......................215 baseline aaa ....................216 baseline aaa route-download ...............217...
Page 14 JUNOSe 11.1.x Command Reference Guide A to M baseline ipv6 local pool ................248 baseline ipv6 mld ..................249 baseline ipv6 mld-proxy interface ...............250 baseline ipv6 ospf ..................251 baseline ipv6 tcp ..................252 baseline line interface sonet ................253 baseline local pool ..................254 baseline log ....................255 baseline mpls interface ................256 baseline mpls label ..................257 baseline mpls next-hop ................258...
Page 15 Table of Contents bgp wait-on-end-of-rib .................299 boolean-test ....................300 boot backup ....................301 boot config ....................302 boot force-backup ..................303 boot hotfix ....................304 boot revert-tolerance ...................305 boot revert-tolerance never .................306 boot subsystem ...................307 boot system ....................308 bridge1483 dos-protection-group ..............309 bridge1483 mtu ..................310 bridge1483 service-profile ................311 bridge ......................312 bridge acquire .....................313 bridge address .....................314...
Page 16 JUNOSe 11.1.x Command Reference Guide A to M cablelength ....................352 cbr .......................353 channelized ....................354 check-disk ....................355 check-vpn-next-hops ...................356 classifier-group ....................357 class-int .......................359 class-vc ......................360 cleanup-timeout-factor ................361 clear access-list ....................362 clear arp ......................363 clear bfd adapted-intervals ................364 clear bfd session ..................365 clear bgp ipv6 ....................366 clear bgp ipv6 dampening ................367 clear bgp ipv6 dynamic-peers ..............369...
Page 17 Table of Contents clear ipv6 access-list ..................408 clear ipv6 bfd session ..................409 clear ipv6 interface ..................410 clear ipv6 mroute ..................411 clear ipv6 neighbors ..................412 clear ipv6 ospf counters ................413 clear ipv6 ospf process ................414 clear ipv6 ospf redistribution ...............415 clear ipv6 pim interface ................416 clear ipv6 pim remote-neighbor ..............417 clear ipv6 prefix-list ..................418 clear ipv6 routes ..................419...
Page 18 JUNOSe 11.1.x Command Reference Guide A to M control-plane ....................459 controlled-interface-type ................460 controller e3 ....................461 controller sonet ...................462 controller t3 ....................463 convergence-factor ..................464 copy ......................465 copy running-configuration .................467 copy running-configuration startup-configuration ........468 copy startup-configuration ................469 cost ......................470 country ......................471 crc .......................472 crl ........................473 crypto key dss .....................474 Chapter 5...
Page 19 Table of Contents disable-autosync ..................520 disable-dynamic-redistribute ...............521 disable-incremental-external-spf ..............522 disable proxy lcp ..................523 disable-switch-on-error ................524 disconnect-cause ..................525 disconnect ssh .....................526 discovery-mode ...................527 distance .......................528 distance bgp ....................529 distance ip ....................530 distribute-domain-wide ................531 distribute-list ....................532 dns-domain-search ..................533 dns-server ....................534 dns-server (for IPv6) ..................535 do ........................536 domain ......................537 domain-authentication ................538...
Page 20 JUNOSe 11.1.x Command Reference Guide A to M encapsulation ppp ..................569 encapsulation pppoe ...................570 encapsulation vlan ..................571 encryption ....................572 end ......................573 enrollment retry-limit ..................574 enrollment retry-period ................575 enrollment url .....................576 equipment loopback ..................577 erase secrets ....................578 ethernet description ..................579 ethernet dos-protection-group ..............580 ethernet oam lfm ..................581 ethernet oam lfm high-threshold ..............582 ethernet oam lfm link-monitor frame-seconds ..........583...
Page 21 Table of Contents Chapter 7 F Commands fabric-strict-priority ..................626 fabric-weight ....................627 fabric weights ....................628 failover-resync .....................629 filter ......................630 flash-disk compare ..................631 flash-disk duplicate ..................632 flash-disk initialize ..................633 flash-disk scan .....................634 forward .......................635 forward interface ..................636 forward next-hop ..................637 forwarding-rate-threshold ................638 forwarding-table route-holddown ..............639 frame-relay class ..................640 frame-relay classifier-list ................641...
Page 22 JUNOSe 11.1.x Command Reference Guide A to M grace-period ....................671 gre destination profile .................672 green-mark ....................673 gre-tunnel classifier-list ................674 gre-tunnel policy ..................675 gre-tunnel policy-list ..................676 group ......................677 gsmp-syn-timeout ..................678 Chapter 9 H Commands halt ......................680 hash ......................681 hdlc dos-protection-group ................682 hdlc down-when-looped ................683 hdlc keepalive .....................684 hdlc shutdown .....................685...
Page 23 Table of Contents interface ......................718 interface atm ....................719 interface-event-disable ................720 interface fastEthernet ..................721 interface gigabitEthernet ................722 interface ip ....................723 interface ipv6 ....................724 interface lag ....................725 interface loopback ..................726 interface mlframe-relay ................727 interface mlppp ...................728 interface null ....................729 interface pos ....................730 interface serial .....................731 interface tenGigabitEthernet ................732 interface tunnel ...................733...
Page 24 JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local auto-configure agent-circuit-identifier ........772 ip dhcp-local cable-modem ................773 ip dhcp-local excluded-address ..............774 ip dhcp-local limit ..................775 ip dhcp-local pool ..................776 ip dhcp-local snmpTraps ................777 ip dhcp-local unique-client-ids ..............778 ip dhcp-server .....................779 ip directed-broadcast ...................780 ip disable-forwarding ...................781 ip domain-lookup ..................782...
Page 25 Table of Contents ip igmp immediate-leave ................823 ip igmp last-member-query-interval ............824 ip igmp oif-map ...................825 ip igmp promiscuous ...................826 ip igmp-proxy ....................827 ip igmp-proxy unsolicited-report-interval .............828 ip igmp-proxy V1-router-present-time ............829 ip igmp querier ....................830 ip igmp querier-timeout ................831 ip igmp query-interval .................832 ip igmp query-max-response-time ...............833 ip igmp robustness ..................834 ip igmp ssm-map enable ................835...
Page 26 JUNOSe 11.1.x Command Reference Guide A to M ip nat outside source static ................875 ip nat pool ....................876 ip nat translation ..................877 ip nat translation max-entries ..............878 ip nfs ......................879 ip nfs host ....................880 ip ospf authentication-key ................881 ip ospf authentication message-digest ............882 ip ospf authentication-none .................883 ip ospf bfd-liveness-detection ..............884 ip ospf cost ....................885...
Page 27 Table of Contents ip rip receive version ...................927 ip rip send version ..................928 ip route .......................929 ip route-cache flow sampled ................931 ip route-map ip-subscriber ................932 ip route-type ....................933 ip router-id ....................934 ip router isis ....................935 ip-router-name ....................936 ip rpf-route ....................937 ip rsvp authentication ..................938 ip rsvp authentication key ................939 ip rsvp bandwidth ..................940...
Page 28 JUNOSe 11.1.x Command Reference Guide A to M ip vrrp icr-partition group ................979 ip vrrp icr-partition svlan-list ...............980 ip vrrp icr-partition svlan-list explicit ............981 ip vrrp icr-partition svlan-range ..............982 ip vrrp icr-partition vlan-list .................983 ip vrrp icr-partition vlan-range ..............984 ip vrrp preempt ...................986 ip vrrp priority .....................987 ip vrrp timers-learn ..................988 ip vrrp track ....................989...
Page 29 Table of Contents ipv6 http server ..................1032 ipv6 initial-sequence-preference ..............1033 ipv6-local-interface ..................1034 ipv6 local pool ...................1035 ipv6 mld ....................1036 ipv6 mld access-group ................1037 ipv6 mld access-source-group ..............1038 ipv6 mld apply-oif-map ................1039 ipv6 mld explicit-tracking ................1040 ipv6 mld group limit ..................1041 ipv6 mld immediate-leave .................1042 ipv6 mld last-member-query-interval ............1043 ipv6 mld oif-map ..................1044...
Page 30 JUNOSe 11.1.x Command Reference Guide A to M ipv6 ospf hello-interval ................1083 ipv6 ospf mtu-ignore .................1084 ipv6 ospf network ..................1085 ipv6 ospf priority ..................1086 ipv6 ospf retransmit-interval ..............1087 ipv6 ospf shutdown ...................1088 ipv6 ospf transmit-delay ................1089 ipv6 pim bfd-liveness-detection ..............1090 ipv6 pim bsr-candidate ................1091 ipv6 pim dr-priority ...................1092 ipv6 pim join-filter ..................1093...
Page 31 Table of Contents isis retransmit-interval ................1136 isis retransmit-throttle-interval ..............1137 isis tag .......................1138 issuer-identifier ..................1139 issu initialize ....................1140 issu start ....................1141 issu stop ....................1142 is-type .......................1143 Chapter 11 K Commands 1145 key ......................1146 key-string ....................1148 Chapter 12 L Commands 1149 l2c ......................1150 l2c end-user-id ...................1151 l2c ip listen ....................1152 l2c ip oif ....................1153...
Page 32 JUNOSe 11.1.x Command Reference Guide A to M l2tp reject-transmit-address-change ............1184 l2tp retransmission ...................1185 l2tp rx-connect-speed-when-equal .............1186 l2tp shutdown ...................1187 l2tp shutdown destination .................1188 l2tp shutdown session ................1189 l2tp shutdown tunnel ................1190 l2tp switch-profile ..................1191 l2tp tunnel default-receive-window ............1192 l2tp tunnel idle-timeout ................1193 l2tp tunnel short-drain-timeout ..............1194 l2tp tunnel-switching .................1195 l2tp tunnel test ..................1196...
Page 33 Table of Contents local ip network ..................1237 log ......................1238 log-adjacency-changes ................1239 log destination ...................1241 log destination syslog source ..............1243 log engineering ..................1244 log fields ....................1245 log filters ....................1246 log here .....................1247 log severity ....................1248 log unlimit ....................1250 log verbosity ....................1251 login ......................1252 login authentication ...................1253 logout subscribers ..................1254...
Page 34 JUNOSe 11.1.x Command Reference Guide A to M match-set summary prefix-tree ..............1291 match tag ....................1292 max-branches ...................1293 max-discovery-table-entries ...............1294 maximum-paths ..................1295 maximum routes ..................1296 maximum-voql ..................1297 max-interfaces ..................1298 max-lsp-lifetime ..................1299 max-response-failure .................1300 max-sessions .....................1301 mdl carrier ....................1303 mdl string ....................1304 mdl transmit .....................1305 mdt-data-delay ..................1306 mdt-data-holddown ...................1307...
Page 35 Table of Contents mpls diff-serv phb-id traffic-class ...............1346 mpls disable ....................1347 mpls explicit-path ..................1348 mpls ip propagate-ttl .................1349 mpls l2transport load-balancing-group ............1350 mpls ldp ....................1352 mpls ldp advertise-labels ................1353 mpls ldp autoconfig ...................1354 mpls ldp deaggregate ................1355 mpls ldp disable ..................1356 mpls ldp discovery transport-address ............1357 mpls ldp egress-label .................1358 mpls ldp graceful-restart ................1359...
Page 36 JUNOSe 11.1.x Command Reference Guide A to M mpls-relay disable ..................1400 mpls reoptimize ..................1401 mpls reoptimize timers frequency .............1402 mpls rsvp ....................1403 mpls rsvp authentication ................1404 mpls rsvp authentication key ..............1405 mpls rsvp bfd-liveness-detection ...............1406 mpls rsvp disable ..................1407 mpls rsvp egress-label ................1408 mpls rsvp message-bundling ..............1409 mpls rsvp profile ..................1410 mpls rsvp refresh-reduction ...............1411...
Page 37: List Of Tables
List of Tables About the Documentation xxxix Table 1: Notice Icons ..................xl Table 2: Text and Syntax Conventions ............xl Part 1 Commands, A to M Chapter 1 Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router ..................5 Table 4: Interface Types and Specifiers for E120 Router and E320 Router .....................13...
Page 38 JUNOSe 11.1.x Command Reference Guide A to M xxxviii List of Tables...
Page 39: About The Documentation
If the information in the latest release notes differs from the information in the documentation, follow the JUNOSe Release Notes. To obtain the most current version of all Juniper Networks® technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/...
Page 40: Table 1: Notice Icons
JUNOSe 11.1.x Command Reference Guide A to M Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death. Laser warning Alerts you to the risk of personal injury from a laser.
Page 41: About The Documentation
CD-ROMs or DVD-ROMs, see the Offline Documentation page at http://www.juniper.net/techpubs/resources/cdrom.html Copies of the Management Information Bases (MIBs) for a particular software release are available for download in the software image bundle from the Juniper Networks Web site at http://www.juniper.net/...
Page 42: Self-Help Online Tools And Resources
7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
Page 43: Part 1 Commands, A To M
Part 1 Commands, A to M Command Reference Topics on page 3 A Commands on page 21 B Commands on page 211 C Commands on page 349 D Commands on page 475 E Commands on page 555 F Commands on page 625 G Commands on page 663 H Commands on page 679 I Commands on page 695...
Page 44 JUNOSe 11.1.x Command Reference Guide A to M Commands, A to M...
Page 45: Chapter 1 Command Reference Topics
Chapter 1 Command Reference Topics Using the no Version Versus the default Version of Commands on page 3 Deprecated Commands on page 4 Filtering show Commands on page 4 Interface Types and Specifiers on page 5 Using the no Version Versus the default Version of Commands Most router configuration commands have a no version, which you can use to negate a command (or a portion of it specified by an optional keyword) or restore its default setting.
Page 46: Deprecated Commands
JUNOSe 11.1.x Command Reference Guide A to M Deprecated Commands A command that has been deprecated in a release or in a particular configuration mode returns a notice when you issue the command manually: NOTICE: This command is obsolete. It may be completely removed from a subsequent software release.
Page 47: Interface Types And Specifiers
Table 3 on page 5 lists the interface specifiers for each type of interface on ERX7xx models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router. NOTE: On ERX7xx models, ERX14xx models, and the ERX310 router, you can use the atm slot/port/vpi/vci interface specifier format as an alternative to the atm slot/port.subinterface format with the specific show interface and show subinterface...
Page 48 JUNOSe 11.1.x Command Reference Guide A to M Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example To configure an ATM interface or atm 3/2.6 interface subinterface: subinterface slot/port[.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13...
Page 49 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example fastEthernet IEEE 802.3 slot/port[.subinterface1[.subinterface2 ] ] fastEthernet Fast 3/2.6.20 slot Number of the chassis slot in the Ethernet range 0–6 (ERX7xx models), 0–13 (FE)
Page 50 JUNOSe 11.1.x Command Reference Guide A to M Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example gigabitEthernet IEEE 802.3 slot/port[.subinterface1[.subinterface2 ] ] gigabitEthernet Gigabit 3/0.6.20 slot Number of the chassis slot in the Ethernet range 0–6 (ERX7xx models), 0–13 (GE)
Page 51 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example mlppp Multilink bundle-name mlppp chicago bundle-name Name of the bundle interface mplsL2shim MPLS shim slot/port[.subinterface ] mplsL2shim 3/2.1 interface...
Page 52 JUNOSe 11.1.x Command Reference Guide A to M Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example Packet over slot/port[.subinterface ] pos 3/2 SONET slot Number of the chassis slot in the (POS) range 0–6 (ERX7xx models), 0–13 interface...
Page 53 Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example cOCx/STMx: slot/port:path-channel/path-payload/ serial unframed tributary-group/tributary-number/ 3/0:10/1/2/2/1 channelNumber[.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13 (ERX14xx models), and 0–2 (ERX310 router)
Page 54 JUNOSe 11.1.x Command Reference Guide A to M Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example cOCx/STMx: slot/port:path-channel/ds3-channel-number serial 3/0:1/1 unchannel i zed [.subinterface ] slot Number of the chassis slot in the range 0–6 (ERX7xx models), 0–13 (ERX14xx models), and 0–2 (ERX310 router)
Page 55: Table 4: Interface Types And Specifiers For E120 Router And E320 Router
Chapter 1: Command Reference Topics Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and ERX310 Router (continued) Interface Type Description Interface Specifier Example sonet – path Path layer of slot/port:path-channel sonet 3/0:2 layer slot Number of the chassis slot in the SONET/SDH range 0–6 (ERX7xx models), 0–13 interface...
Page 56 JUNOSe 11.1.x Command Reference Guide A to M Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example ATM interface To configure an ATM interface or subinterface: atm 3/1/7.6 subinterface slot/adapter/port[.subinterface ] slot Number of the chassis slot in the range 0–5 (E120 router) and 0–5 or 11–16 (E320 router)
Page 57 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example fastEthernet IEEE 802.3 slot/adapter/port fastEthernet 6/0/0 Fast slot Number of the chassis slot, either Ethernet (for Fast Ethernet 6 or 7 (FE) management port...
Page 58 JUNOSe 11.1.x Command Reference Guide A to M Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example IEEE bundle-name[.subinterface ] lag paris.2 802.3ad link bundle-name Name of the bundle aggregation subinterface Number of the LAG group (LAG) subinterface in the range 1–2147483647...
Page 59 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example Packet over slot/adapter/port pos 5/0/0 SONET slot Number of the chassis slot in the (POS) range 0–5 (E120 router) and 0–5 or interface 11–16 (E320 router) adapter Identifier for the IOA within the...
Page 60 JUNOSe 11.1.x Command Reference Guide A to M Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example sonet – section Section layer slot/adapter/port sonet 3/0/0 layer of a slot Number of the chassis slot in the SONET/SDH range 0–5 (E120 router) and 0–5 or interface...
Page 61 Chapter 1: Command Reference Topics Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued) Interface Type Description Interface Specifier Example tunnel Tunnel tunnel-type:tunnel-name[.subinterface] tunnel gre:boston interface tunnel-type Type of the tunnel: dvmrp, gre, l2tp, or mpls tunnel-name Name of the tunnel subinterface For GRE tunnels, number of the subinterface in the range...
Page 62 JUNOSe 11.1.x Command Reference Guide A to M Interface Types and Specifiers...
Page 63: Chapter 2 A Commands
Chapter 2 A Commands...
Page 64: Aaa Accounting Acct-Stop On-Aaa-Failure
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting acct-stop on-aaa-failure aaa accounting acct-stop on-aaa-failure { enable | disable } Syntax no aaa accounting acct-stop on-aaa-failure Command introduced before JUNOSe Release 7.1.0. Release Information Configures AAA to send an Acct-Stop message if a user fails AAA, but RADIUS grants Description access.
Page 65: Aaa Accounting Acct-Stop On-Access-Deny
Chapter 2: A Commands aaa accounting acct-stop on-access-deny aaa accounting acct-stop on-access-deny { enable | disable } Syntax no aaa accounting acct-stop on-access-deny Command introduced before JUNOSe Release 7.1.0. Release Information Issues an Acct-Stop message if RADIUS denies access. The no version returns the Description parameter to the default of disable.
Page 66: Aaa Accounting Broadcast
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting broadcast aaa accounting broadcast vrGroupName Syntax no aaa accounting broadcast Command introduced before JUNOSe Release 7.1.0. Release Information Broadcasts accounting records for a virtual router to accounting servers of the virtual Description routers in the specified virtual router group.
Page 67: Aaa Accounting Commands
Chapter 2: A Commands aaa accounting commands aaa accounting commands level { default | listName } stop-only tacacs+ Syntax no aaa accounting commands level listName Command introduced before JUNOSe Release 7.1.0. Release Information Enables AAA accounting for TACACS+ to be captured for a specific user privilege Description level and creates accounting method lists.
Page 68: Aaa Accounting Default
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting default aaa accounting { subscriberType } default accountor [ accountor ]* Syntax no aaa accounting { subscriberType } default Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the accounting method used for a particular type of subscriber. The no Description version produces the same result as specifying the radius value.
Page 69: Aaa Accounting Duplication
Chapter 2: A Commands aaa accounting duplication aaa accounting duplication routerName Syntax no aaa accounting duplication Command introduced before JUNOSe Release 7.1.0. Release Information Sends duplicate accounting records to the accounting server of a different virtual Description router. The no version disables the feature. routerName Virtual router name Options Global Configuration...
Page 70: Aaa Accounting Exec
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting exec aaa accounting exec { default | listName } start-stop tacacs+ Syntax no aaa accounting exec listName Command introduced before JUNOSe Release 7.1.0. Release Information Enables AAA accounting for TACACS+ to be captured for User Exec terminal sessions, Description and creates accounting method lists.
Page 71: Aaa Accounting Immediate-Update
Chapter 2: A Commands aaa accounting immediate-update aaa accounting immediate-update { enable | disable } Syntax no aaa accounting immediate-update Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to send an Acct-Update message to the accounting server on Description receipt of a response (ACK or timeout) for the Acct-Start message.
Page 72: Aaa Accounting Interval
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting interval aaa accounting interval period Syntax no aaa accounting interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the default accounting interval used for all users and services. The no version Description sets the value to 0, which turns off interim accounting.
Page 73: Aaa Accounting Statistics
Chapter 2: A Commands aaa accounting statistics aaa accounting statistics { volume-time | time } Syntax no aaa accounting statistics Command introduced in JUNOSe Release 7.2.0. Release Information Configures the router to collect either a full set of statistics or only uptime status for Description the sessions AAA is managing.
Page 74: Aaa Accounting Suppress Null-Username
JUNOSe 11.1.x Command Reference Guide A to M aaa accounting suppress null-username [ no ] aaa accounting suppress null-username Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that accounting records are not generated for users whose username string Description is null;...
Page 75: Aaa Accounting Vr-Group
Chapter 2: A Commands aaa accounting vr-group [ no ] aaa accounting vr-group vrGroupName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates an accounting virtual router group and enters VR Group Configuration mode. Description A virtual router group can have up to four virtual routers, whose accounting servers can receive broadcast accounting records.
Page 76: Aaa Authentication Default
JUNOSe 11.1.x Command Reference Guide A to M aaa authentication default aaa authentication subscriberType default authenticator [ authenticator ]* Syntax no aaa authentication subscriberType default Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the authentication method used for a particular type of subscriber. The no Description version produces the same result as specifying the radius value.
Page 77: Aaa Authentication Enable Default
Chapter 2: A Commands aaa authentication enable default aaa authentication enable default authenticator [ authenticator ]* Syntax no aaa authentication enable default Command introduced before JUNOSe Release 7.1.0. Release Information Allows privilege determination to be authenticated through the authenticator(s) you Description specify.
Page 78: Aaa Authentication Login
JUNOSe 11.1.x Command Reference Guide A to M aaa authentication login aaa authentication login { default | authListName } authenticator [ authenticator ]* Syntax no aaa authentication login authListName Command introduced before JUNOSe Release 7.1.0. Release Information Creates an authentication list and the criteria for login. This authentication is applied Description to vty users.
Page 79: Aaa Authorization
Chapter 2: A Commands aaa authorization aaa authorization { exec | commands level } authorListName authMethod Syntax [ authMethod ]* no aaa authorization { exec | commands level } authorListName Command introduced before JUNOSe Release 7.1.0. Release Information Sets parameters that restrict a user's access to a network. The no version disables Description authorization for a function.
Page 80: Aaa Authorization Config-Commands
JUNOSe 11.1.x Command Reference Guide A to M aaa authorization config-commands [ no ] aaa authorization config-commands Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reauthorizes the use of Global Configuration commands. This command is enabled Description by default when the aaa authorization commands command is executed. The no version disables AAA configuration command authorization.
Page 81: Aaa Delimiter
Chapter 2: A Commands aaa delimiter aaa delimiter { domainName | realmName } delimiters Syntax no aaa delimiter { domainName | realmName } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies delimiters for the domain and realm names. You can specify up to eight Description delimiters each for domain and realm names.
Page 82: Aaa Dhcpv6-Delegated-Prefix Delegated-Ipv6-Prefix
JUNOSe 11.1.x Command Reference Guide A to M aaa dhcpv6-delegated-prefix delegated-ipv6-prefix [ no ] aaa dhcpv6-delegated-prefix delegated-ipv6-prefix Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Sets the Delegated-IPv6-Prefix RADIUS attribute to be used for DHCPv6 Prefix Description Delegation. The no version restores the default behavior, which causes the Framed-IPv6-Prefix RADIUS attribute to be used for Prefix Delegation.
Page 83: Aaa Dns
Chapter 2: A Commands aaa dns aaa dns { primary | secondary } ipAddress Syntax no aaa dns { primary | secondary } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of the primary DNS name server. The no version sets the Description corresponding address to 0.
Page 84: Aaa Domain-Map
JUNOSe 11.1.x Command Reference Guide A to M aaa domain-map aaa domain-map domainName Syntax [ routerName [ loopback interfaceNumber | ipAddress ipMask ] ] no aaa domain-map domainName Command introduced before JUNOSe Release 7.1.0. Release Information ipAddress and ipMask variables added in JUNOSe Release 9.0.0. Maps a user domain name to a virtual router.
Page 85: Aaa Duplicate-Address-Check
Chapter 2: A Commands aaa duplicate-address-check aaa duplicate-address-check { enable | disable } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to enable or disable routing table address lookup or duplicate address Description check. There is no no version. NOTE: To use this command, you must have a B-RAS license.
Page 86: Aaa Intf-Desc-Format Include
JUNOSe 11.1.x Command Reference Guide A to M aaa intf-desc-format include aaa intf-desc-format include { sub-intf | adapter } { enable | disable } Syntax no aaa intf-desc-format include { sub-intf | adapter } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies whether the subinterface or adapter is included in or omitted from the Description...
Page 87: Aaa Ipv6-Dns
Chapter 2: A Commands aaa ipv6-dns aaa ipv6-dns { primary | secondary } ipv6Address Syntax no aaa ipv6-dns { primary | secondary } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IPv6 address of the primary DNS name server. The no version sets the Description corresponding address to 0 (or ::).
Page 88: Aaa Ipv6-Nd-Ra-Prefix Framed-Ipv6-Prefix
JUNOSe 11.1.x Command Reference Guide A to M aaa ipv6-nd-ra-prefix framed-ipv6-prefix [ no ] aaa ipv6-nd-ra-prefix framed-ipv6-prefix Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Sets the Framed-IPv6-Prefix RADIUS attribute to be used for IPv6 Neighbor Discovery Description router advertisements. The no version restores the default behavior, which causes the IPv6-NdRa-Prefix VSA to be used for router advertisements.
Page 89: Aaa Local Database
Chapter 2: A Commands aaa local database [ no ] aaa local database databaseName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a local user database for use by a local authentication server. The no version Description deletes the local user database and all entries in the database. databaseName Name of the user database;...
Page 90: Aaa Local Select Database
JUNOSe 11.1.x Command Reference Guide A to M aaa local select database aaa local select database databaseName Syntax no aaa local select Command introduced before JUNOSe Release 7.1.0. Release Information Assigns the local user database that the virtual router uses for local authentication. Description The no version restores the default setting, which uses the default local user database for local authentication.
Page 91: Aaa Local Username
Chapter 2: A Commands aaa local username [ no ] aaa local username userName database databaseName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a user entry in the specified local user database and enters Local User Description Configuration mode.
Page 92: Aaa New-Model
JUNOSe 11.1.x Command Reference Guide A to M aaa new-model [ no ] aaa new-model Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies AAA authentication for Telnet sessions. The no version restores simple Description authentication (login and password). Global Configuration Mode aaa new-model...
Page 93: Aaa Parse-Direction
Chapter 2: A Commands aaa parse-direction aaa parse-direction { domainName | realmName } { left-to-right | right-to-left } Syntax no aaa parse-direction { domainName | realmName } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the direction the router uses for domain and realm parsing. The router Description either searches from right-to-left, or from left-to-right.
Page 94: Aaa Parse-Order
JUNOSe 11.1.x Command Reference Guide A to M aaa parse-order aaa parse-order { domain-first | realm-first } Syntax no aaa parse-order Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the order in which the router searches for a domain name. It either searches Description for realm and then domain, or it searches for domain and then realm.
Page 95: Aaa Profile
Chapter 2: A Commands aaa profile [ no ] aaa profile profileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a new AAA profile to allow mapping to AAA services. The no version removes Description the profile. profileName Profile name of up to 32 characters Options AAA Profile Configuration Mode...
Page 96: Aaa Qos Downstream-Rate
JUNOSe 11.1.x Command Reference Guide A to M aaa qos downstream-rate [ no ] aaa qos downstream-rate Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Enables the QoS downstream rate application to shape VLANs or ATM VCs based on Description downstream rates obtained from the Actual-Data-Rate-Downstream [26-130] DSL Forum VSA.
Page 97: Aaa Route-Download
Chapter 2: A Commands aaa route-download aaa route-download [ downloadInterval ] [ retry-interval retryInterval ] Syntax [ cost cost ] [ tag tagValue ] [ base-user-name name ] [ password password ] [ synchronization time ] no aaa route-download Command introduced in JUNOSe Release 8.1.0. Release Information Enables the RADIUS route-download server and configures parameters for the server.
Page 98: Aaa Route-Download Now
JUNOSe 11.1.x Command Reference Guide A to M aaa route-download now aaa route-download now [ force ] [ adjust-scheduler ] Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Specifies that the RADIUS route-download server immediately perform the route Description download operation.
Page 99: Aaa Route-Download Suspend
Chapter 2: A Commands aaa route-download suspend [ no ] aaa route-download suspend Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Temporarily suspends the RADIUS route-download server operation. The no version Description stops the suspend specification and restores the route download operation. Privileged Exec Mode aaa route-download suspend...
Page 100: Aaa Service Accounting Interval
JUNOSe 11.1.x Command Reference Guide A to M aaa service accounting interval aaa service accounting interval period Syntax no aaa service accounting interval Command introduced in JUNOSe Release 9.0.0. Release Information Specifies the default accounting interval used for services on the virtual router the Description Service Manager application uses this setting for RADIUS-initiated services when no value is specified in the Service-Interim-Acct-Interval VSA (Juniper VSA 26-140).
Page 101: Aaa Subscriber Limit Per-Port
Chapter 2: A Commands aaa subscriber limit per-port aaa subscriber limit per-port interfaceSpecifier limitValue Syntax no aaa subscriber limit per-port interfaceSpecifier Command introduced before JUNOSe Release 7.1.0. Release Information Sets the maximum number of active subscribers permitted on the specified port. Description The no version returns the limit to the default, 0 (zero).
Page 102: Aaa Subscriber Limit Per-Vr
JUNOSe 11.1.x Command Reference Guide A to M aaa subscriber limit per-vr aaa subscriber limit per-vr limitValue Syntax no aaa subscriber limit per-vr Command introduced before JUNOSe Release 7.1.0. Release Information Sets the maximum number of active subscribers permitted on the virtual router. The Description no version returns the limit to the default, 0 (zero).
Page 103: Aaa Timeout
Chapter 2: A Commands aaa timeout To set the default idle timeout: Syntax aaa timeout idle idleTimeout no aaa timeout idle To set the default session timeout: aaa timeout session sessionTimeout no aaa timeout session To enable monitoring of only ingress traffic for the configured idle timeout period: aaa timeout idle ingress-only no aaa timeout idle [ ingress-only ] Command introduced before JUNOSe Release 7.1.0.
Page 104: Aaa Tunnel Assignment-Id-Format
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel assignment-id-format aaa tunnel assignment-id-format { assignmentId | client-server-id } Syntax no aaa tunnel assignment-id-format Command introduced before JUNOSe Release 7.1.0. Release Information Sets the format for the tunnel assignment ID. The no version sets the tunnel Description assignment ID to the default, assignmentID.
Page 105: Aaa Tunnel Calling-Number-Format
Chapter 2: A Commands aaa tunnel calling-number-format aaa tunnel calling-number-format Syntax { descriptive [ include-agent-circuit-id ] [ include-agent-remote-id ] | fixed [ stacked ] | fixed-adapter-embedded [ stacked ] | fixed-adapter-new-field [ stacked ] | include-agent-circuit-id [ include-agent-remote-id ] | include-agent-remote-id } no aaa tunnel calling-number-format Command introduced before JUNOSe Release 7.1.0.
Page 106 JUNOSe 11.1.x Command Reference Guide A to M systemName (up to 4 bytes) slot (2 bytes) port (1 byte) 0 (8 bytes) In the case of PPP terminated from LNS, the Calling-Station-Id attribute is the value passed as the calling-station AVP. fixed-adapter-embedded Formats calling number AVP to use a fixed format of up to 15 characters consisting of all ASCII fields with a 1-byte slot field, 1-byte adapter field, and 1-byte port field:...
Page 107 Chapter 2: A Commands include-agent-remote-id Formats calling number AVP to include only the agent-remote-id suboption stacked Includes a 4-byte stacked VLAN (S-VLAN) ID in the fixed, fixed-adapter-embedded, and fixed-adapter-new-field calling number AVP formats for Ethernet interfaces; by default, these formats do not include the S-VLAN ID unless you specify the optional stacked keyword: Format for Ethernet interfaces that use fixed: systemName (up to 4 bytes) slot (2 bytes) port (1 byte) S-VLAN (4 bytes) VLAN...
Page 108: Aaa Tunnel Calling-Number-Format-Fallback
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel calling-number-format-fallback aaa tunnel calling-number-format-fallback Syntax { descriptive | fixed [ stacked ] | fixed-adapter-embedded [ stacked ] | fixed-adapter-new-field [ stacked ] } no aaa tunnel calling-number-format-fallback Command introduced in JUNOSe Release 8.1.0. Release Information fixed-adapter-embedded, fixed-adapter-new-field, and stacked keywords added in JUNOSe Release 10.0.0.
Page 109 Chapter 2: A Commands Fallback format for serial interfaces: systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte) 0 (8 bytes) For E120 routers and E320 routers, adapter is the number of the bay in which the I/O adapter (IOA) resides, either 0 (representing the right IOA bay on the E120 router and the upper IOA bay on the E320 router) or 1 (representing the left IOA bay on the E120 router or the lower IOA bay on...
Page 110: Aaa Tunnel Client-Name
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel client-name aaa tunnel client-name name Syntax no aaa tunnel client-name Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the default tunnel client name. If the tunnel client name is not included in Description the tunnel attributes that are returned from the domain map or authentication server, the router uses the default name.
Page 111: Aaa Tunnel-Group
Chapter 2: A Commands aaa tunnel-group [ no ] aaa tunnel-group groupName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an AAA tunnel group and changes the mode to Tunnel Group Configuration Description mode. In Tunnel Group Configuration mode, you can add up to 31 tunnel definitions. The no version deletes the AAA group tunnel configuration from the router.
Page 112: Aaa Tunnel Ignore
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel ignore aaa tunnel ignore { nas-port | nas-port-type } { enable | disable } Syntax no aaa tunnel ignore { nas-port | nas-port-type } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies whether to use the tunnel peer's NAS-Port [5] and NAS-Port-Type [61] Description...
Page 113: Aaa Tunnel Nas-Port-Method
Chapter 2: A Commands aaa tunnel nas-port-method aaa tunnel nas-port-method cisco-avp Syntax no aaa tunnel nas-port-method Command introduced before JUNOSe Release 7.1.0. Release Information Configures the tunnel's default NAS port type to provide limited support for a Cisco Description proprietary vendor-specific method when configuring the LAC to LNS NAS port identification transfer mechanism.
Page 114: Aaa Tunnel Password
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel password aaa tunnel password name Syntax no aaa tunnel password Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the default tunnel password. If the tunnel password is not included in the Description tunnel attributes that are returned from the domain map or authentication server, the router uses the default password.
Page 115: Aaa Tunnel Switch-Profile
Chapter 2: A Commands aaa tunnel switch-profile aaa tunnel switch-profile profileName Syntax no aaa tunnel switch-profile Command introduced in JUNOSe Release 7.2.0. Release Information Applies a default L2TP tunnel switch profile to a virtual router. The default tunnel Description switch profile defines the L2TP tunnel switching behavior for the interfaces to which this profile is assigned.
Page 116: Aaa Tunnel Tx-Connect-Speed-Method
JUNOSe 11.1.x Command Reference Guide A to M aaa tunnel tx-connect-speed-method aaa tunnel tx-connect-speed-method { static-layer2 | dynamic-layer2 Syntax | qos | actual } no aaa tunnel tx-connect-speed-method Command introduced in JUNOSe Release 8.0.0. Release Information Configures the method used to calculate the transmit connect speed of the subscriber's Description access interface for establishing a tunneled L2TP session associated with a virtual router.
Page 117: Aaa User Accounting Interval
Chapter 2: A Commands aaa user accounting interval aaa user accounting interval period Syntax no aaa user accounting interval Command introduced in JUNOSe Release 9.0.0. Release Information Specifies the default user accounting interval used on the virtual router. This router Description uses this value for users when no value is specified in the RADIUS Acct-Interim-Interval attribute (RADIUS attribute 85).
Page 118: Aaa Virtual-Router
JUNOSe 11.1.x Command Reference Guide A to M aaa virtual-router aaa virtual-router indexInteger vrName Syntax no aaa virtual-router indexInteger Command introduced before JUNOSe Release 7.1.0. Release Information For AAA broadcast accounting, adds a virtual router to a virtual router group. The Description no version with the indexInteger parameter removes a specific virtual router from the virtual router group.
Page 119: Aaa Wins
Chapter 2: A Commands aaa wins aaa wins { primary | secondary } ipAddress Syntax no aaa wins { primary | secondary } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of the WINS name server. The no version sets the Description corresponding address to 0.
Page 120: Access-Class In
JUNOSe 11.1.x Command Reference Guide A to M access-class in access-class listName in Syntax no access-class [ listName ] in Command introduced before JUNOSe Release 7.1.0. Release Information Restricts incoming connections between a particular virtual terminal line and the Description addresses in an access list.
Page 121: Access-List
Chapter 2: A Commands access-list Standard IP access list: Syntax access-list accessListName { permit | deny } { srcIP srcWildIp | [ host ] srcIPHost | any } [ log ] no access-list accessListName [ { permit | deny } { srcIP srcWildIp | [ host ] srcIPHost | any } [ log ] ] Extended IP access list: access-list accessListName { permit | deny } ip { srcIP srcWildIp |...
Page 122: Accounting
JUNOSe 11.1.x Command Reference Guide A to M accounting accounting { exec | commands level } listName Syntax no accounting { exec | commands level } Command introduced before JUNOSe Release 7.1.0. Release Information Enables AAA accounting services on a console line, a virtual terminal line, or a group Description of lines and applies the specified accounting method list.
Page 123: Adapter Accept
Chapter 2: A Commands adapter accept adapter accept adapterSpecifier Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Erases from NVS the type and configuration of the previous I/O adapter (IOA) in the Description specified IOA bay, and allows you to configure a new IOA. Issue this command after you have installed a different type of IOA in an IOA bay.
Page 124: Adapter Disable
JUNOSe 11.1.x Command Reference Guide A to M adapter disable adapter disable adapterSpecifier Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Disables the IOA installed in the specified IOA bay. There is no no version. Description NOTE: For IOAs that support hot-swapping, issuing this command does not reboot the line module.
Page 125: Adapter Enable
Chapter 2: A Commands adapter enable adapter enable adapterSpecifier Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Enables the IOA installed in the specified IOA bay. There is no no version. Description NOTE: For IOAs that support hot-swapping, issuing this command does not reboot the line module.
Page 126: Adapter Erase
JUNOSe 11.1.x Command Reference Guide A to M adapter erase adapter erase adapterSpecifier Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Erases from NVS the type and configuration of the previous IOA in the specified IOA Description bay, and allows you to configure a new IOA. Issue this command before you install a different type of IOA in an IOA bay.
Page 127: Address
Chapter 2: A Commands address To set the tunnel endpoint address: Syntax address serverAddress no address To configure RIP: [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } To configure NAT address pool ranges: [ no ] address startIpAddress endIpAddress Command introduced before JUNOSe Release 7.1.0.
Page 128: Address Area
JUNOSe 11.1.x Command Reference Guide A to M address area [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax area { areaId | areaIdInt } Command introduced before JUNOSe Release 7.1.0. Release Information Creates an interface on which OSPF runs in the specified area, on top of the IP Description interface at the specified IP address.
Page 129: Address Authentication Key
Chapter 2: A Commands address authentication key address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax authentication key [ 0 | 8 ] authkey no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] authentication key Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the password for text authentication and the key for MD5 authentication.
Page 130: Address Authentication-Key
JUNOSe 11.1.x Command Reference Guide A to M address authentication-key [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax authentication-key [ 0 | 8 ] authKey Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a password used by neighboring routers that are using OSPF simple password Description authentication.
Page 131: Address Authentication Message-Digest
Chapter 2: A Commands address authentication message-digest [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax authentication message-digest Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that MD5 authentication is used for the OSPF interface. The no version sets Description authentication for the interface to none, but leaves any configured MD5 key intact.
Page 132: Address Authentication Mode
JUNOSe 11.1.x Command Reference Guide A to M address authentication mode address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax authentication mode { text | md5 keyID } no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] authentication mode Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type of authentication used on this interface.
Page 133: Address Authentication-None
Chapter 2: A Commands address authentication-none [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax authentication-none Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that no authentication is to be used for the OSPF interface. The no version Description has no effect.
Page 134: Address Bfd-Liveness-Detection
JUNOSe 11.1.x Command Reference Guide A to M address bfd-liveness-detection address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax bfd-liveness-detection [ minimum-interval minInterval | [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ] no address { ipAddress | unnumbered interfaceType interfaceSpecifier } bfd-liveness-detection Command introduced in JUNOSe Release 8.0.0.
Page 135: Address Cost
Chapter 2: A Commands address cost [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } cost intfCost Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a cost metric for an OSPF interface. Used in the calculation of the SPF Description routing table.
Page 136: Address Dead-Interval
JUNOSe 11.1.x Command Reference Guide A to M address dead-interval [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax dead-interval deadInterval Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time period that the router's neighbors should wait without seeing hello Description packets from the router before they declare the router to be down.
Page 137: Address-Family
Chapter 2: A Commands address-family For BGP: Syntax [ no ] address-family { { ipv4 | ipv6 } [ unicast | multicast | [ unicast ] vrf vrfName ] | { vpnv4 | vpnv6 } [ unicast ] | l2vpn [ signaling ] | route-target [ signaling ] | vpls vplsName | vpws vpwsName } For IS-IS: [ no ] address-family ipv6 [ unicast | multicast | unicast multicast ]...
Page 138 JUNOSe 11.1.x Command Reference Guide A to M ipv4 Specifies sessions that carry standard IPv4 address prefixes (default) Options ipv6 Specifies sessions that carry IPv6 address prefixes multicast Specifies multicast prefixes unicast Specifies unicast prefixes (default) vrfName Name of the VRF; string of 1–32 alphanumeric characters vpnv4 Specifies sessions that carry customer VPN-IPv4 prefixes, each of which has been made globally unique by adding an 8-byte route distinguisher vpnv6 Specifies sessions that carry customer VPN-IPv6 prefixes, each of which...
Page 139: Address Hello-Interval
Chapter 2: A Commands address hello-interval [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax hello-interval helloInterval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interval between hello packets that the router sends on the interface. Description The no version resets the hello interval to its default.
Page 140: Address Message-Digest-Key Md5
JUNOSe 11.1.x Command Reference Guide A to M address message-digest-key md5 address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey no address { ipAddress | unnumbered interfaceType interfaceSpecifier } message-digest-key keyID Command introduced before JUNOSe Release 7.1.0.
Page 141: Address Network
Chapter 2: A Commands address network address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax network { broadcast | non-broadcast | point-to-point } no address { ipAddress | unnumbered interfaceType interfaceSpecifier } network Command introduced before JUNOSe Release 7.1.0. Release Information Configures the OSPF network type for the specified interface to something other Description than the default for the network medium.
Page 142: Address Passive-Interface
JUNOSe 11.1.x Command Reference Guide A to M address passive-interface [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax passive-interface Command introduced before JUNOSe Release 7.1.0. Release Information Disables the transmission of routing updates on an interface. OSPF routing information Description is neither sent nor received through the specified router interface.
Page 143: Address-Pool-Name
Chapter 2: A Commands address-pool-name address-pool-name poolName Syntax no address-pool-name Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an address pool name to associate with the domain name being configured. Description The no version removes the pool name. poolName Name of the pool to associate with the domain name Options Domain Map Configuration Mode...
Page 144: Address Priority
JUNOSe 11.1.x Command Reference Guide A to M address priority [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax priority intfPriority Command introduced before JUNOSe Release 7.1.0. Release Information Sets the router priority. Used in determining the designated router for the particular Description network.
Page 145: Address Receive Version
Chapter 2: A Commands address receive version address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax receive version { 1 | 2 | 1 2 | 2 1 | off } no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] receive version Command introduced before JUNOSe Release 7.1.0.
Page 146: Address Retransmit-Interval
JUNOSe 11.1.x Command Reference Guide A to M address retransmit-interval [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax retransmit-interval retransInterval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the time between LSA retransmissions for the interface when an Description acknowledgment for the LSA is not received.
Page 147: Address Send Version
Chapter 2: A Commands address send version address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax send version { 1 | 2 | 1 2 | 2 1 | off } no address [ ipAddress | unnumbered interfaceType interfaceSpecifier ] send version Command introduced before JUNOSe Release 7.1.0.
Page 148: Address Transmit-Delay
JUNOSe 11.1.x Command Reference Guide A to M address transmit-delay [ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } Syntax transmit-delay transmDelay Command introduced before JUNOSe Release 7.1.0. Release Information Sets the estimated time it takes to transmit a link-state update packet on the interface. Description The no version restores the default value.
Page 149: Adjustment-Factor
Chapter 2: A Commands adjustment-factor adjustment-factor dslType value Syntax no adjustment-factor dslType Command introduced in JUNOSe Release 9.1.0. Release Information Configures an adjustment factor that is applied globally to the ANCP-reported Description downstream and upstream data rate for all subscribers of a particular DSL line type. The adjusted data rate results in an accurate QoS shaping rate.
Page 150: Agent Context-Name
JUNOSe 11.1.x Command Reference Guide A to M agent context-name agent context-name contextName [ wildcard ] [ limit contextNameLimit ] Syntax no agent Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the virtual router SNMP agent on which you want to poll MIB objects. The Description no version returns the context name to the default context (virtual router).
Page 151: Aggregate-Address
Chapter 2: A Commands aggregate-address [ no ] aggregate-address { address mask | ipv6Prefix } Syntax [ as-set | summary-only | attribute-map attributeMapTag | advertise-map advertiseMapTag | suppress-map suppressMapName ]* Command introduced before JUNOSe Release 7.1.0. Release Information Creates an aggregate entry in a BGP routing table. The no version removes the Description aggregate.
Page 152: Aggregation-Node
JUNOSe 11.1.x Command Reference Guide A to M aggregation-node aggregation-node { nodeValue | atm | atm-vc | atm-vp vpValue | ethernet | fr-vc | Syntax forwarding | ppp-interface | svlan svlanValue | vlan } no aggregation-node Command introduced in JUNOSe Release 8.0.0. Release Information ppp-interface keyword added in JUNOSe Release 10.3.0.
Page 153: Aggressive-Mode
Chapter 2: A Commands aggressive-mode aggressive-mode { accepted | requested | required } Syntax no aggressive-mode Command introduced before JUNOSe Release 7.1.0. Release Information accepted, requested, and required keywords added in JUNOSe Release 7.3.0. Enables aggressive mode negotiation for the tunnel. The no version restores the Description default, no aggressive mode.
Page 154: Allow
JUNOSe 11.1.x Command Reference Guide A to M allow [ no ] allow domainName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the domain names that are to be allowed access to AAA authentication. Description The no version negates the command. domainName—Name of the domain;...
Page 155: Append-After
Chapter 2: A Commands append-after append-after indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Adds a next hop after a particular index in the MPLS explicit path. The sequence Description numbers for existing hops after the index adjust automatically.
Page 156: Application
JUNOSe 11.1.x Command Reference Guide A to M application application applicationType1 [ applicationType2 [ applicationType3 ] ] Syntax no application Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type of application that is secured by connections created with this Description IPSec transport profile.
Page 157: Aps Events
Chapter 2: A Commands aps events aps events list [ list ]* Syntax no aps events Command introduced in JUNOSe Release 7.2.0. Release Information Enables line modules to deliver APS events to the necessary SNMP traps. You can Description configure notification for specific events. The no version disables the delivery of APS events from line modules to SNMP traps.
Page 158: Aps Force
JUNOSe 11.1.x Command Reference Guide A to M aps force aps force channelNumber Syntax no aps force Command introduced before JUNOSe Release 7.1.0. Release Information Forces the specified interface to be replaced by the inactive interface in an APS/MSP Description group.
Page 159: Aps Group
Chapter 2: A Commands aps group aps group groupName Syntax no aps group Command introduced before JUNOSe Release 7.1.0. Release Information Assigns an interface to an APS/MSP group. The no version removes a group of Description APS/MSP interfaces. groupName—Name of the APS/MSP group to which the active and standby Options interfaces belong;...
Page 160: Aps Lockout
JUNOSe 11.1.x Command Reference Guide A to M aps lockout aps lockout [ 0 ] Syntax no aps lockout Command introduced before JUNOSe Release 7.1.0. Release Information Prevents the working interface from switching to the protect interface. The no version Description restores the default situation, in which the working interface can switch to the protect interface.
Page 161: Aps Manual
Chapter 2: A Commands aps manual aps manual channelNumber Syntax no aps manual Command introduced before JUNOSe Release 7.1.0. Release Information Forces the working interface to switch to the protect interface, unless a request of Description equal or higher priority exists. The no version allows the specified working interface to resume the active role.
Page 162: Aps Protect
JUNOSe 11.1.x Command Reference Guide A to M aps protect aps protect [ 0 ] Syntax no aps protect Command introduced before JUNOSe Release 7.1.0. Release Information Configures an interface as a protect interface. The no version removes the relationship Description between the protect interface and the active interface.
Page 163: Aps Revert
Chapter 2: A Commands aps revert aps revert minutes Syntax no aps revert Command introduced before JUNOSe Release 7.1.0. Release Information Configures the APS/MSP group to operate in revertive mode. The no version restores Description the default setting, nonrevertive mode. minutes—Number of minutes in the range 5–12 at which the interface resumes Options the active role after that interface becomes available...
Page 164: Aps Unidirectional
JUNOSe 11.1.x Command Reference Guide A to M aps unidirectional [ no ] aps unidirectional Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the APS/MSP group to operate in unidirectional mode, the default setting. Description The no version configures the APS/MSP group to operate in bidirectional mode. Controller Configuration Mode aps unidirectional...
Page 165: Aps Working
Chapter 2: A Commands aps working aps working [ 1 ] Syntax no aps working Command introduced before JUNOSe Release 7.1.0. Release Information Configures an interface as a working interface. The no version removes the Description configuration. 1 Channel number that identifies the working interface; because the working Options interface is always assigned channel number 1, this is the only valid option Controller Configuration...
Page 166: Area
JUNOSe 11.1.x Command Reference Guide A to M area no area { areaId | areaIdInt } Syntax This command has only a no version. See the no area command for a complete Description description. area...
Page 167: Area-Authentication
Chapter 2: A Commands area-authentication [ no ] area-authentication { csnp | psnp } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables (suppresses) simple text authentication or HMAC MD5 Description authentication of IS-IS level 1 CSNP packets or PSNP packets. The no version restores the default behavior, in which authentication of IS-IS level 1 CSNPs and PSNPs is disabled.
Page 168: Area-Authentication-Key
JUNOSe 11.1.x Command Reference Guide A to M area-authentication-key area-authentication-key [ 0 | 8 ] authKey Syntax no area-authentication-key Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a password used by neighboring routers for authentication of IS-IS level 1 Description LSPs, CSNPs, and PSNPs.
Page 169: Area Default-Cost
Chapter 2: A Commands area default-cost area { areaId | areaIdInt } default-cost defaultCost Syntax no area { areaId | areaIdInt } default-cost Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a cost for the default summary route sent into a stub area. A stub area is Description an OSPF area that carries a default route, intra-area routes, and interarea routes, but does not carry external routes.
Page 170: Area-Message-Digest-Key
JUNOSe 11.1.x Command Reference Guide A to M area-message-digest-key area-message-digest-key keyId hmac-md5 [ 0 | 8 ] key Syntax [ start-accept startAcceptTime [ { startAcceptMonth startAcceptDay | startAcceptDay startAcceptMonth } startAcceptYear ] ] [ start-generate startGenTime [ { startGenMonth startGenDay | startGenDay startGenMonth } startGenYear ] ] [ stop-accept { never | stopAcceptTime [ { stopAcceptMonth stopAcceptDay | stopAcceptDay stopAcceptMonth } stopAcceptYear ] } ]...
Page 171 Chapter 2: A Commands never—Indicates the router never stops accepting or generating packets; overrides previously specified stop times and keeps using the authentication key in sending and receiving PDUs with the corresponding authentication indefinitely stopAcceptTime, stopAcceptMonth, stopAcceptDay, stopAcceptYear—Time, month, day, year that the router will stop accepting packets created with this password. Use military time format HH : MM[: SS ].
Page 172: Area Nssa
JUNOSe 11.1.x Command Reference Guide A to M area nssa [ no ] area { areaId | areaIdInt } nssa [ default-information-originate [ always | Syntax metric absoluteValue | metric-type 1 | metric-type 2 | route-map mapTag ]* ] [ no-summary ] Command introduced before JUNOSe Release 7.1.0.
Page 173: Area Range
Chapter 2: A Commands area range For OSPFv2: Syntax [ no ] area { areaId | areaIdInt } range ipAddress mask [ do-not-advertise ] [ cost costValue ] For OSPFV3: [ no ] area { areaId | areaIdInt } range ipv6Prefix/ipv6PrefixLength [ do-not-advertise | advertise | cost costValue ] Command introduced before JUNOSe Release 7.1.0.
Page 174: Area Stub
JUNOSe 11.1.x Command Reference Guide A to M area stub [ no ] area { areaId | areaIdInt } stub [ no-summary ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information no-summary keyword for OSPFv2 added in JUNOSe Release 7.2.0. Defines an area as a stub area.
Page 175: Area Virtual-Link
Chapter 2: A Commands area virtual-link [ no ] area { areaId | areaIdInt } virtual-link ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines an OSPF virtual link. The no version removes the virtual link. Description areaId OSPF area ID in IP address format Options areaIdInt OSPF area ID as a decimal value in the range 0–4294967295 ipAddress IP address associated with the virtual link neighbor...
Page 176: Area Virtual-Link Authentication-Key
JUNOSe 11.1.x Command Reference Guide A to M area virtual-link authentication-key [ no ] area { areaID | areaIdInt } virtual-link ipAddress authentication-key [ 0 | 8 ] key Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures simple password (type 1) authentication for OSPF virtual links. The no Description version removes the password.
Page 177: Area Virtual-Link Authentication Message-Digest
Chapter 2: A Commands area virtual-link authentication message-digest [ no ] area { areaID | areaIdInt } virtual-link ipAddress authentication message-digest Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that MD5 authentication is used for the virtual link. The no version sets the Description authentication for the virtual link to none, but leaves any configured MD5 key intact.
Page 178: Area Virtual-Link Authentication-None
JUNOSe 11.1.x Command Reference Guide A to M area virtual-link authentication-none [ no ] area { areaId | areaIdInt } virtual-link ipAddress authentication-none Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that no authentication is to be used for the virtual link. The no version has Description no effect.
Page 179: Area Virtual-Link Dead-Interval
Chapter 2: A Commands area virtual-link dead-interval [ no ] area { areaId | areaIdInt } virtual-link ipAddress dead-interval deadInterval Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines an OSPF virtual link and the time interval allowed for detecting a dead router. Description The no version removes the virtual link's dead interval.
Page 180: Area Virtual-Link Hello-Interval
JUNOSe 11.1.x Command Reference Guide A to M area virtual-link hello-interval [ no ] area { areaId | areaIdInt } virtual-link ipAddress hello-interval helloInterval Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines an OSPF virtual link and the time between the hello packets. The hello interval Description value must be the same for both ends of the virtual link.
Page 181: Area Virtual-Link Message-Digest-Key Md5
Chapter 2: A Commands area virtual-link message-digest-key md5 area { areaId | areaIdInt } virtual-link ipAddress Syntax message-digest-key md5KeyId md5 [ 0 | 8 ] msgDigestKey no area { areaId | areaIdInt } virtual-link ipAddress message-digest-key md5KeyId Command introduced before JUNOSe Release 7.1.0. Release Information Enables MD5 authentication and configures MD5 keys for virtual links.
Page 182: Area Virtual-Link Retransmit-Interval
JUNOSe 11.1.x Command Reference Guide A to M area virtual-link retransmit-interval [ no ] area { areaId | areaIdInt } virtual-link ipAddress retransmit-interval Syntax retransmInterval Command introduced before JUNOSe Release 7.1.0. Release Information Defines an OSPF virtual link and the time between link-state advertisement Description retransmissions for the adjacency belonging to the virtual link.
Page 183: Area Virtual-Link Transmit-Delay
Chapter 2: A Commands area virtual-link transmit-delay [ no ] area { areaId | areaIdInt } virtual-link ipAddress transmit-delay transmDelay Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines an OSPF virtual link and the estimated time it takes to transmit a link-state Description update packet on the virtual link.
Page 184: Arp
JUNOSe 11.1.x Command Reference Guide A to M To add a permanent ARP cache entry in Global Configuration mode: Syntax [ no ] arp [ vrf vrfName ] ipAddress interfaceType interfaceSpecifier [ macAddress [ validate ] ] To modify the subscriber policy for ARP packets in Subscriber Policy Configuration mode: arp { permit | deny } no arp...
Page 185 Chapter 2: A Commands Global Configuration, Subscriber Policy Configuration Mode...
Page 186: Arp Spoof-Check
JUNOSe 11.1.x Command Reference Guide A to M arp spoof-check [ no ] arp spoof-check Syntax Command introduced in JUNOSe Release 9.3.0. Release Information Configures the router to check for spoofed ARP packets received on an IP interface. Description By default, the router checks all ARP packets received on a major IP interface or a subinterface to identify and discard spoofed ARP packets.
Page 187: Arp Timeout
Chapter 2: A Commands arp timeout arp timeout timeoutVal Syntax no arp timeout Command introduced before JUNOSe Release 7.1.0. Release Information Specifies how long an entry remains in the ARP cache. You can set the ARP timeout Description on Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces, and bridged Ethernet interfaces configured over ATM 1483.
Page 188: Assured-Rate
JUNOSe 11.1.x Command Reference Guide A to M assured-rate assured-rate { assuredRate | hierarchical | [ operator operandValue ]* } Syntax no assured-rate Command introduced before JUNOSe Release 7.1.0. Release Information operator and operandValue variables added in JUNOSe Release 7.1.0. Sets the assured rate for the scheduler profile.
Page 189: Atm
Chapter 2: A Commands atm { ubr | ubrpcr pcr | nrtvbr pcr scr mbs | rtvbr pcr scr mbs | cbr pcr } Syntax no atm Command introduced before JUNOSe Release 7.1.0. Release Information Configures traffic-shaping parameters for PPPoA via domain-based parameters. The Description no version removes the ATM traffic-shaping configuration.
Page 190: Atm Aal5 Description
JUNOSe 11.1.x Command Reference Guide A to M atm aal5 description atm aal5 description name Syntax no atm aal5 description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or alias to an ATM AAL5 interface. The no version removes Description the text description or alias.
Page 191: Atm Aal5 Shutdown
Chapter 2: A Commands atm aal5 shutdown [ no ] atm aal5 shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the administrative state of an ATM AAL5 interface to disabled. The no version Description enables a disabled interface. Interface Configuration Mode atm aal5 shutdown...
Page 192: Atm Aal5 Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide A to M atm aal5 snmp trap link-status [ no ] atm aal5 snmp trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status traps on the AAL5 layer on a per-interface basis. The no Description version disables the traps.
Page 193: Atm Atm1483 Advisory-Rx-Speed
Chapter 2: A Commands atm atm1483 advisory-rx-speed atm atm1483 advisory-rx-speed speed Syntax no atm atm1483 advisory-rx-speed Command introduced before JUNOSe Release 7.1.0. Release Information Sets an advisory receive (RX) speed that the LAC sends in the RX Connect-Speed Description AVP [38] to the LNS. The no version restores the default behavior, in which the RX speed is not sent to the LNS.
Page 194: Atm Atm1483 Auto-Configure
JUNOSe 11.1.x Command Reference Guide A to M atm atm1483 auto-configure atm atm1483 auto-configure upperInterfaceType Syntax [ lockout-time { minValue maxValue | none } ] no atm atm1483 auto-configure upperInterfaceType [ lockout-time ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies one or more types of dynamic upper interface encapsulations that are Description accepted or detected by a dynamic ATM 1483 subinterface.
Page 195: Atm Atm1483 Description
Chapter 2: A Commands atm atm1483 description atm atm1483 description name Syntax no atm atm1483 description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or alias to an ATM 1483 interface. The no version removes Description the text description or alias.
Page 196: Atm Atm1483 Export-Subinterface-Description
JUNOSe 11.1.x Command Reference Guide A to M atm atm1483 export-subinterface-description [ no ] atm atm1483 export-subinterface-description Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Exports ATM 1483 subinterface descriptions to the line module. The no version Description restores the default behavior, where ATM 1483 subinterface descriptions are not sent to the line module.
Page 197: Atm Atm1483 Mtu
Chapter 2: A Commands atm atm1483 mtu atm atm1483 mtu size Syntax no atm atm1483 mtu Command introduced before JUNOSe Release 7.1.0. Release Information Sets the MTU size for an ATM 1483 subinterface. The no version restores the default Description MTU size of 9180.
Page 198: Atm Atm1483 Profile
JUNOSe 11.1.x Command Reference Guide A to M atm atm1483 profile atm atm1483 profile upperInterfaceType profileName Syntax no atm atm1483 profile upperInterfaceType Command introduced before JUNOSe Release 7.1.0. Release Information Adds a nested profile assignment to a base profile for a dynamic ATM 1483 Description subinterface.
Page 199: Atm Atm1483 Shutdown
Chapter 2: A Commands atm atm1483 shutdown [ no ] atm atm1483 shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the administrative state of an ATM 1483 subinterface to disabled. The no version Description enables a disabled subinterface. Subinterface Configuration Mode atm atm1483 shutdown...
Page 200: Atm Atm1483 Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide A to M atm atm1483 snmp trap link-status [ no ] atm atm1483 snmp trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status traps on the ATM1483 layer. The no version disables the Description traps.
Page 201: Atm Atm1483 Subscriber
Chapter 2: A Commands atm atm1483 subscriber atm atm1483 subscriber upperInterfaceType { user | user-prefix } userName Syntax domain domainName [ { password | password-prefix } password ] [ no-authenticate ] no atm atm1483 subscriber upperInterfaceType Command introduced before JUNOSe Release 7.1.0. Release Information Configures a local subscriber (when one cannot be obtained externally, as in PPP) Description...
Page 202: Atm Auto-Configuration
JUNOSe 11.1.x Command Reference Guide A to M atm auto-configuration [ no ] atm auto-configuration Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables autoconfiguration of ILMI. Autoconfiguration is enabled by default. This Description command overrides any previous configuration of the atm uni-version command. The no version disables auto configuration and sets the ILMI parameters to the UNI version configured using the atm uni-version command, which has a default value of UNI 4.0.
Page 203: Atm Bulk-Config
Chapter 2: A Commands atm bulk-config atm bulk-config bulkConfigName [ vc-range vpiStart vpiEnd vciStart vciEnd ]* Syntax no atm bulk-config bulkConfigName [ vc-range vpiStart vpiEnd vciStart vciEnd ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures a range of ATM PVCs for use by a dynamic ATM 1483 subinterface, and Description assigns a name to the virtual circuit (VC) range.
Page 204: Atm Bulk-Config Modify
JUNOSe 11.1.x Command Reference Guide A to M atm bulk-config modify atm bulk-config bulkConfigName modify vc-range vpiStart vpiEnd vciStart vciEnd Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the VC subrange values for the specified bulk configuration VC range. If the Description new subrange encompasses previously configured subranges within that range, those subranges are merged into the new one, freeing subrange resources.
Page 205: Atm Bulk-Config Shutdown
Chapter 2: A Commands atm bulk-config shutdown [ no ] atm bulk-config bulkConfigName shutdown Syntax [ vc-range vpiStart vpiEnd vciStart vciEnd ] Command introduced before JUNOSe Release 7.1.0. Release Information Administratively disables (shuts down) the specified VC range or subrange. The no Description version reenables the specified VC range or the specified subranges;...
Page 206: Atm Cac
JUNOSe 11.1.x Command Reference Guide A to M atm cac [ no ] atm cac [ subscriptionBandwidth ] [ ubr ubrWeight ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables CAC on the ATM interface. If the subscription limit or UBR weight parameters Description are set to zero, the router uses the effective port bandwidth as the subscription bandwidth.
Page 207: Atm Cell-Packing
Chapter 2: A Commands atm cell-packing atm cell-packing maxCellsPerPacket mcpt-timer timerIdentifier Syntax no atm cell-packing Command introduced before JUNOSe Release 7.1.0. Release Information Configures cell concatenation parameters for an ATM 1483 subinterface that provides Description ATM layer 2 services over MPLS with virtual channel connection (VCC) cell relay encapsulation.
Page 208: Atm-Cell-Mode
JUNOSe 11.1.x Command Reference Guide A to M atm-cell-mode [ no ] atm-cell-mode Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Accounts for the ATM cell tax in rate calculationsfor interface types that support Description rate-limiting and are stackable over ATM. The no version restores the default, which uses the frame size with the layer 2 header included.
Page 209: Atm Classifier-List
Chapter 2: A Commands atm classifier-list atm classifier-list classifierName [ traffic-class trafficClassName ] Syntax [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ] [ clp clpValue ] no atm classifier-list classifierName [ classifierNumber ] Command introduced in JUNOSe Release 7.1.0. Release Information Creates a classifier control list that can only be used in ATM policy lists.
Page 210: Atm Class-Vc
JUNOSe 11.1.x Command Reference Guide A to M atm class-vc atm class-vc vcClassName Syntax no atm class-vc [ vcClassName ] Command introduced in JUNOSe Release 7.3.0. Release Information Assigns a previously configured VC class to a base profile for a dynamic ATM 1483 Description subinterface.
Page 211: Atm Clock Internal
Chapter 2: A Commands atm clock internal [ no ] atm clock internal [ internalSource ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Causes the ATM interface to generate the transmit clock internally. The no version Description causes ATM interfaces to recover the clock from the received signal. If the internal clock is chosen and no internal source is specified, then the internal clock source is taken from the line module.
Page 212: Atm Description
JUNOSe 11.1.x Command Reference Guide A to M atm description atm description name Syntax no atm description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or alias to the ATM interface. The first 32 characters of the Description description are pushed out to RADIUS during authentication and accounting.
Page 213: Atm Dos-Protection-Group
Chapter 2: A Commands atm dos-protection-group atm dos-protection-group groupName Syntax no atm dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches an ATM denial of service (DoS) protection group to an interface. The no Description version removes the DoS protection group. groupName Name of the DoS protection group;...
Page 214: Atm Framing
JUNOSe 11.1.x Command Reference Guide A to M atm framing atm framing framingType Syntax no atm framing Command introduced before JUNOSe Release 7.1.0. Release Information Configures T3 or E3 framing on an ATM interface. The no version returns framing Description to the default.
Page 215: Atm Ilmi-Enable
Chapter 2: A Commands atm ilmi-enable [ no ] atm ilmi-enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables ILMI on the interface. The no version removes the ILMI PVC. Description Interface Configuration Mode atm ilmi-enable...
Page 216: Atm Ilmi-Keepalive
JUNOSe 11.1.x Command Reference Guide A to M atm ilmi-keepalive [ no ] atm ilmi-keepalive [ seconds ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables generation of ILMI keepalive messages on the router, affecting the operational Description state of the ATM interface.
Page 217: Atm Lbo
Chapter 2: A Commands atm lbo atm lbo { long | short } Syntax no atm lbo Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the cable length (line build-out) for the ATM T3 or E3 interface. The length Description of cable determines power requirements.
Page 218: Atm Mcpt-Timers
JUNOSe 11.1.x Command Reference Guide A to M atm mcpt-timers atm mcpt-timers timer1 timer2 timer3 Syntax no atm mcpt-timers Command introduced before JUNOSe Release 7.1.0. Release Information Configures systemwide values for the three ATM Martini cell packing timers. These Description timers define the time threshold that the router uses to collect and concatenate ATM cells in a single VCC cell relay–encapsulated packet and transmit the packet on an MPLS pseudowire connection.
Page 219: Atm Oam
Chapter 2: A Commands atm oam atm oam [ vpi ] [ [ seg-loopback | end-loopback [ loopback-timer time ] ] Syntax [ cc { source | sink | both } ] ] no atm oam [ vpi ] [ [ seg-loopback | end-loopback [ loopback-timer time ] ] ] Command introduced before JUNOSe Release 7.1.0.
Page 220: Atm Oam Flush
JUNOSe 11.1.x Command Reference Guide A to M atm oam flush [ no ] atm oam flush [ alarm-cells ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to ignore all OAM cells received on an ATM interface, and to Description stop sending OAM cells on this interface.
Page 221: Atm Oam Loopback-Location
Chapter 2: A Commands atm oam loopback-location atm oam loopback-location locationID Syntax [ no ] atm oam loopback-location Command introduced before JUNOSe Release 7.1.0. Release Information Sets the location ID of the ATM interface. The no version returns the loopback location Description to the default setting of all 1s (ones).
Page 222: Atm Policy
JUNOSe 11.1.x Command Reference Guide A to M atm policy atm policy { input | output } policyName Syntax [ statistics { enabled [ preserve | merge ] | disabled [ merge ] } | merge ] no atm policy { input | output } [ policyName ] Command introduced in JUNOSe Release 7.1.0.
Page 223: Atm Policy-List
Chapter 2: A Commands atm policy-list [ no ] atm policy-list policyName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Creates an ATM policy list and accesses Policy List Configuration mode. If you execute Description an atm policy-list command and type exit, the router creates a policy list with a filter rule as the default.
Page 224: Atm Pvc
JUNOSe 11.1.x Command Reference Guide A to M atm pvc To create a PVC on an ATM interface when using the aal5snap, aal5autoconfig, or Syntax aal5mux ip encapsulation type: atm pvc vcd vpi vci encapsulation [ cbr cbr | peak [ average burst [ rt ] ] ] [ oam [ seconds | cc [ segment | end-to-end ] { source | sink | both } ] ] [ inArp [ minutes ] ] no atm pvc vcd...
Page 225 Chapter 2: A Commands encapsulation Available options differ for ATM interfaces and dynamic ATM 1483 subinterfaces, as follows: For PVCs created on ATM interfaces: aal5all Causes the router to pass through all ATM AAL5 traffic without interpreting it; supported for ATM layer 2 services over MPLS aal0 Causes the router to receive raw ATM cells on this circuit and forward the cells without performing AAL5 packet reassembly;...
Page 226 JUNOSe 11.1.x Command Reference Guide A to M sink Enables this VC as a sink point (cell receiver) source Enables this VC as the source point (cell generator) both Enables this VC as both a sink point and a source point Interface Configuration, Profile Configuration, Subinterface Configuration Mode Configuring an MPLS Pseudowire with VCC Cell Relay Encapsulation, Configuring...
Page 227: Atm Shutdown
Chapter 2: A Commands atm shutdown [ no ] atm shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Administratively disables an ATM interface. The no version enables a disabled Description interface. Interface Configuration Mode atm shutdown...
Page 228: Atm Snmp Trap Link-Status
JUNOSe 11.1.x Command Reference Guide A to M atm snmp trap link-status [ no ] atm snmp trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP link status traps on the ATM layer on a per-interface basis. The no Description version disables the traps.
Page 229: Atm Sonet Stm-1
Chapter 2: A Commands atm sonet stm-1 [ no ] atm sonet stm-1 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the mode of operation on the physical interface to SDH STM-1. The no version Description restores the default value, SONET STS-3c operation. Interface Configuration Mode atm sonet stm-1...
Page 230: Atm Uni-Version
JUNOSe 11.1.x Command Reference Guide A to M atm uni-version atm uni-version versionNumber Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the UNI version the interface should use. There is no no version. Description versionNumber UNI version number: 3.0, 3.1, or 4.0 Options Interface Configuration Mode...
Page 231: Atm Vc-Per-Vp
Chapter 2: A Commands atm vc-per-vp atm vc-per-vp [ vcCount ] Syntax no atm vc-per-vp Command introduced before JUNOSe Release 7.1.0. Release Information Configures the number of virtual circuits per virtual path. This command controls Description the VPI and VCI range on the ATM interface. The allowable configuration range depends on the line module.
Page 232: Atm Vp-Description
JUNOSe 11.1.x Command Reference Guide A to M atm vp-description atm vp-description vpi description Syntax no atm vp-description vpi Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description to an individual virtual path (VP) on an ATM interface. Use Description the show atm vp-description command to display the description.
Page 233: Atm-Vp Qos-Parameter
Chapter 2: A Commands atm-vp qos-parameter atm-vp vpi qos-parameter qosParameterInstanceName qosParameterInstanceValue Syntax no atm-vp vpi qos-parameter qosParameterInstanceName Command introduced in JUNOSe Release 7.1.0. Release Information Attaches a QoS parameter instance to the specified VP on the ATM major interface. Description The no version detaches the parameter instance from the specified VP.
Page 234: Atm-Vp Qos-Profile
JUNOSe 11.1.x Command Reference Guide A to M atm-vp qos-profile [ no ] atm-vp vpi qos-profile qosProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Attaches a QoS profile to the specified VP on the interface. The no version detaches Description the QoS profile from the VP.
Page 235: Atm Vp-Tunnel
Chapter 2: A Commands atm vp-tunnel atm vp-tunnel vpi { cbr kbps | kbps } Syntax no atm vp-tunnel vpi Command introduced before JUNOSe Release 7.1.0. Release Information Defines a virtual path tunnel and configures the rate of traffic flow within the tunnel. Description For QoS configurations, use to configure a shapeless VP tunnel.
Page 236: Authentication
JUNOSe 11.1.x Command Reference Guide A to M authentication authentication { rsa-sig | pre-share } Syntax no authentication Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the authentication method to use in the IKE policy. The no version restores Description the default, preshared keys.
Page 237: Authentication Key
Chapter 2: A Commands authentication key authentication key [ 0 | 8 ] authkey Syntax no authentication key Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the password for text authentication and the key for MD5 authentication Description for RIP remote-neighbor interface. The no version clears the key for the interface. Supported only in RIP version 2.
Page 238: Authentication-Key
JUNOSe 11.1.x Command Reference Guide A to M authentication-key authentication-key [ 0 | 8 ] authKey Syntax no authentication-key Command introduced before JUNOSe Release 7.1.0. Release Information Enables simple password authentication and assigns a password used by OSPF Description remote neighbors. The no version deletes the password. 0 Indicates the authKey is entered in unencrypted form (plaintext);...
Page 239: Authentication Message-Digest
Chapter 2: A Commands authentication message-digest authentication message-digest Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that MD5 authentication is used for the OSPF remote-neighbor interface. Description There is no no version. Remote Neighbor Configuration Mode authentication message-digest...
Page 240: Authentication Mode
JUNOSe 11.1.x Command Reference Guide A to M authentication mode authentication mode { text | md5 keyID } Syntax no authentication mode Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type of authentication used on the RIP remote-neighbor interface. Description Authentication is disabled by default.
Page 241: Authentication-None
Chapter 2: A Commands authentication-none authentication-none Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that no authentication is to be used for the OSPF remote-neighbor interface. Description There is no no version. Remote Neighbor Configuration Mode authentication-none...
Page 242: Authorization
JUNOSe 11.1.x Command Reference Guide A to M authorization authorization { exec | commands level } authorListName Syntax no authorization {exec | commands level } Command introduced before JUNOSe Release 7.1.0. Release Information Enables AAA authorization for a specified vty line or group of vty lines. Associates Description the authorization list with the specified line.
Page 243: Authorization Change
Chapter 2: A Commands authorization change [ no ] authorization change Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the router to receive change-of-authorization messages, such as packet Description mirroring attributes and Service Manager attributes, from the RADIUS server. The no version restores the default, in which support for RADIUS-initiated change-of-authorization messages is disabled on the router.
Page 244: Auth-Router-Name
JUNOSe 11.1.x Command Reference Guide A to M auth-router-name [ no ] auth-router-name [ routerName ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Assigns an access virtual router. The no version restores the default router. Description NOTE: This command replaces the deprecated router-name command, which may be removed completely in a future release.
Page 245: Auto-Configure
Chapter 2: A Commands auto-configure auto-configure upperInterfaceType [ lockout-time { minValue maxValue | none } ] Syntax no auto-configure upperInterfaceType [ lockout-time ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type(s) of dynamic encapsulations that are accepted or detected by the Description static ATM 1483 interface.
Page 246: Auto-Configure Atm1483
JUNOSe 11.1.x Command Reference Guide A to M auto-configure atm1483 [ no ] auto-configure atm1483 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the static ATM AAL5 interface to support autodetection of an ATM 1483 Description dynamic encapsulation type. The no version terminates autodetection of the ATM 1483 encapsulation type.
Page 247: Auto-Configure Vlan
Chapter 2: A Commands auto-configure vlan [ no ] auto-configure vlan Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Configures the static VLAN major interface to support autodetection of a dynamic Description VLAN subinterface. The no version terminates autodetection of the VLAN subinterface. Interface Configuration Mode auto-configure vlan...
Page 248: Auto-Cost Reference-Bandwidth
JUNOSe 11.1.x Command Reference Guide A to M auto-cost reference-bandwidth [ no ] auto-cost reference-bandwidth refBw Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Controls how OSPFv3 calculates default metrics for the interface. The no version Description assigns cost based only on the interface type. refBw Bandwidth in megabits per second in the range 1–4294967;...
Page 249: Automatic-Virtual-Link
Chapter 2: A Commands automatic-virtual-link [ no ] automatic-virtual-link Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables automatic virtual link configuration. The no version disables an Description automatic virtual link. Router Configuration Mode automatic-virtual-link...
Page 250: Auto-Summary
JUNOSe 11.1.x Command Reference Guide A to M auto-summary [ no ] auto-summary Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reenables the automatic summarization of routes redistributed into BGP to their Description natural network masks. Automatic summarization is enabled by default. The no version disables automatic summarization.
Page 251: Average-Length-Exponent
Chapter 2: A Commands average-length-exponent average-length-exponent exponent Syntax no average-length-exponent Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the exponent used to weight the average queue length over time, controlling Description WRED responsiveness. The no version negates the average-length-exponent. exponent Total average queue length (TAQL) coefficient Options Drop Profile Configuration...
Page 252: Avp
JUNOSe 11.1.x Command Reference Guide A to M avp avpType action Syntax no avp avpType Command introduced in JUNOSe Release 7.2.0. Release Information Configures the L2TP tunnel switching behavior for a specified L2TP AVP type. The Description no version restores the default L2TP tunnel switching behavior for AVPs of the specified type.
Page 253: Chapter 3 B Commands
Chapter 3 B Commands...
Page 254: Backup-Address-Pool-Name
JUNOSe 11.1.x Command Reference Guide A to M backup-address-pool-name backup-address-pool-name poolName Syntax no address-pool-name Command introduced in JUNOSe Release 10.0.0. Release Information Specifies a backup local address pool name to associate with the domain name being Description configured. This pool is used to assign IP addresses to users, if the primary local pool has been fully allocated.
Page 255: Bandwidth
Chapter 3: B Commands bandwidth bandwidth bandwidth Syntax no bandwidth Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the total bandwidth available on the interface. For total reservable Description bandwidth, see the mpls bandwidth command. The no version removes the admission control configuration from the interface.
Page 256: Bandwidth Oversubscription
JUNOSe 11.1.x Command Reference Guide A to M bandwidth oversubscription [ no ] bandwidth oversubscription Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows the line modules to operate below line rate performance. The no version Description forces the line modules to operate at line rate performance. Privileged Exec Mode bandwidth oversubscription...
Page 257: Banner
Chapter 3: B Commands banner banner [ motd | login | exec ] bannerText Syntax no banner [ motd | login | exec ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures message-of-the-day, login, or exec banners to be displayed by the CLI. If Description you do not specify an option, the behavior is the same as if you specified the motd option.
Page 258: Baseline Aaa
JUNOSe 11.1.x Command Reference Guide A to M baseline aaa baseline aaa Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for authentication and authorization statistics. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 259: Baseline Aaa Route-Download
Chapter 3: B Commands baseline aaa route-download baseline aaa route-download Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Sets a statistics baseline for route downloads. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 260: Baseline Atm Vp Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline atm vp interface baseline atm vp interface atm interfaceSpecifier vpi Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for an ATM virtual path (VP) interface. The router implements Description the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 261: Baseline Bridge
Chapter 3: B Commands baseline bridge baseline bridge { bridgeGroupName | vplsName } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Sets a statistics baseline for a bridge group or VPLS instance. The router implements Description the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 262: Baseline Bridge Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline bridge interface baseline bridge interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for a specified network interface belonging to a bridge group Description or VPLS instance.
Page 263: Baseline Bridge Interface Vpls
Chapter 3: B Commands baseline bridge interface vpls baseline bridge interface vpls vplsName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for a VPLS instance on the VPLS virtual core interface, which Description represents all of the MPLS tunnels from the router to the remote VPLS edge (VE) devices.
Page 264: Baseline Clns
JUNOSe 11.1.x Command Reference Guide A to M baseline clns baseline clns [ interfaceType interfaceSpecifier ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for CLNS. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 265: Baseline Cops
Chapter 3: B Commands baseline cops baseline cops Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a baseline for the Common Open Policy Service (COPS) statistics. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 266: Baseline Dhcp
JUNOSe 11.1.x Command Reference Guide A to M baseline dhcp baseline dhcp { server | relay } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for DHCP relay and DHCP relay proxy statistics. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are...
Page 267: Baseline Frame-Relay Interface
Chapter 3: B Commands baseline frame-relay interface baseline frame-relay interface interfaceType interfaceSpecifier [ dlci ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for Frame Relay and MLFR interfaces, subinterfaces, and Description circuits. The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 268: Baseline Frame-Relay Multilinkinterface
JUNOSe 11.1.x Command Reference Guide A to M baseline frame-relay multilinkinterface baseline frame-relay multilinkinterface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for MLFR links. The router implements the baseline by Description reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 269: Baseline Hdlc Interface
Chapter 3: B Commands baseline hdlc interface baseline hdlc interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for Cisco HDLC interfaces. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 270: Baseline Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline interface baseline interface interfaceType interfaceSpecifier [ vcd ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for an interface or a specific ATM virtual circuit. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are...
Page 271: Baseline Ip
Chapter 3: B Commands baseline ip baseline ip [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the baseline on general IP traffic statistics as the current value. There is no no Description version. vrfName Name of the VRF; string of 1–32 alphanumeric characters Options Privileged Exec Mode...
Page 272: Baseline Ip Bgp
JUNOSe 11.1.x Command Reference Guide A to M baseline ip bgp baseline ip bgp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the baseline on all BGP statistics as the current value. There is no no version. Description Privileged Exec Mode baseline ip bgp...
Page 273: Baseline Ip Dhcp-External
Chapter 3: B Commands baseline ip dhcp-external baseline ip dhcp-external Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for DHCP external server statistics. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 274: Baseline Ip Dhcp-Local
JUNOSe 11.1.x Command Reference Guide A to M baseline ip dhcp-local baseline ip dhcp-local [ interface interfaceType interfaceSpecifier ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for DHCP local server statistics. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 275: Baseline Ip Dvmrp
Chapter 3: B Commands baseline ip dvmrp baseline ip dvmrp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for DVMRP statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 276: Baseline Ip Http
JUNOSe 11.1.x Command Reference Guide A to M baseline ip http baseline ip http Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Sets a baseline for HTTP local server statistics. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 277: Baseline Ip Igmp
Chapter 3: B Commands baseline ip igmp baseline ip igmp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for IGMP statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 278: Baseline Ip Igmp-Proxy Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline ip igmp-proxy interface baseline ip igmp-proxy interface Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the baseline on all IGMP statistics by setting the counters for the numbers of Description queries received and reports sent on the upstream interface to zero.
Page 279: Baseline Ip Interface
Chapter 3: B Commands baseline ip interface baseline ip interface [ vrf vrfName ] interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for IP interface statistics. There is no no version. Description vrfName Name of the VRF; string of 1–32 alphanumeric characters Options interfaceType Interface type;...
Page 280: Baseline Ip Mobile Home-Agent
JUNOSe 11.1.x Command Reference Guide A to M baseline ip mobile home-agent baseline ip mobile home-agent Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Sets a statistics baseline for a specified Mobile IP home agent for control traffic. The Description router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics...
Page 281: Baseline Ip Nat
Chapter 3: B Commands baseline ip nat baseline ip nat Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for NAT statistics and counters. There is no no version. Description Privileged Exec Mode baseline ip nat...
Page 282: Baseline Ip Ospf
JUNOSe 11.1.x Command Reference Guide A to M baseline ip ospf baseline ip ospf Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for OSPF statistics and counters. There is no no version. Description Privileged Exec Mode baseline ip ospf...
Page 283: Baseline Ip Rip
Chapter 3: B Commands baseline ip rip baseline ip rip Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for RIP interfaces. The router implements the baseline by Description reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 284: Baseline Ip Tunnel-Reassembly
JUNOSe 11.1.x Command Reference Guide A to M baseline ip tunnel-reassembly baseline ip tunnel-reassembly Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Sets a statistics baseline for tunnel reassembly statistics on the current virtual router. Description The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever you retrieve baseline-relative statistics.
Page 285: Baseline Ip Udp
Chapter 3: B Commands baseline ip udp baseline ip udp [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for UDP statistics. The router implements the baseline by Description reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 286: Baseline Ip Vrrp
JUNOSe 11.1.x Command Reference Guide A to M baseline ip vrrp baseline ip vrrp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for VRRP statistics. The router implements the baseline by Description reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 287: Baseline Ipv6
Chapter 3: B Commands baseline ipv6 baseline ipv6 [ udp ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the baseline on general IPv6 traffic statistics as the current value. Use the udp Description keyword to set a baseline for UDP statistics. There is no no version. udp Sets a baseline for UDP statistics Options Privileged Exec...
Page 288: Baseline Ipv6 Dhcpv6-Local
JUNOSe 11.1.x Command Reference Guide A to M baseline ipv6 dhcpv6-local baseline ipv6 dhcpv6-local Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for DHCPv6 local server statistics. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 289: Baseline Ipv6 Interface
Chapter 3: B Commands baseline ipv6 interface baseline ipv6 interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for IPv6 interface statistics. There is no no version. Description interfaceType Interface type; see Interface Types and Specifiers on page 5 Options interfaceSpecifier—Particular interface;...
Page 290: Baseline Ipv6 Local Pool
JUNOSe 11.1.x Command Reference Guide A to M baseline ipv6 local pool baseline ipv6 local pool Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Sets a baseline for the IPv6 local pool prefix assignment statistics. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 291: Baseline Ipv6 Mld
Chapter 3: B Commands baseline ipv6 mld baseline ipv6 mld Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for MLD statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 292: Baseline Ipv6 Mld-Proxy Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline ipv6 mld-proxy interface baseline ipv6 mld-proxy interface Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the baseline on all MLD statistics by setting the counters for the numbers of Description queries received and reports sent on the upstream interface to zero.
Page 293: Baseline Ipv6 Ospf
Chapter 3: B Commands baseline ipv6 ospf baseline ipv6 ospf [ processId ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for OSPFv3 statistics and counters. There is no no version. Description processId Integer in the range 1–65535 Options Privileged Exec Mode...
Page 294: Baseline Ipv6 Tcp
JUNOSe 11.1.x Command Reference Guide A to M baseline ipv6 tcp baseline ipv6 tcp [ vrf vrfName ] [ localAddress localPort remoteAddress remotePort ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information ip keyword removed and ipv6 keyword added in JUNOSe Release 7.2.0. Sets a statistics baseline for only IPv6 TCP statistics.
Page 295: Baseline Line Interface Sonet
Chapter 3: B Commands baseline line interface sonet baseline line interface sonet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for SONET/SDH statistics at the line layer. The router Description implements the baseline by reading and storing the MIB statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 296: Baseline Local Pool
JUNOSe 11.1.x Command Reference Guide A to M baseline local pool baseline local pool Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for the router local address pool statistics. The router Description implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 297: Baseline Log
Chapter 3: B Commands baseline log baseline log [ last-reset | time [ utc ] month day year ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for logging events. To use the current system time, do not enter any Description options.
Page 298: Baseline Mpls Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline mpls interface baseline mpls interface interfaceName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for the specified MPLS major interface or MPLS shim Description interface. By default, the interface counters are baselined at zero. There is no no version.
Page 299: Baseline Mpls Label
Chapter 3: B Commands baseline mpls label baseline mpls label { interface interfaceName atm vpi vci | labelValue } Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for the specified MPLS in label. Statistics for an in label must Description be enabled with the mpls statistics label command before they can be baselined.
Page 300: Baseline Mpls Next-Hop
JUNOSe 11.1.x Command Reference Guide A to M baseline mpls next-hop baseline mpls next-hop nextHopIndex Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for the specified MPLS next hop. Statistics for a next hop Description must be enabled with the mpls statistics next-hop command before they can be baselined.
Page 301: Baseline Mpls Tunnel
Chapter 3: B Commands baseline mpls tunnel baseline mpls tunnel tunnelName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for the specified MPLS tunnel. Statistics for a tunnel must Description be enabled with the mpls statistics policy command before they can be baselined. By default, the next-hop counters are baselined at zero.
Page 302: Baseline Path Interface Sonet
JUNOSe 11.1.x Command Reference Guide A to M baseline path interface sonet baseline path interface sonet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for SONET/SDH statistics at the path layer. The router Description implements the baseline by reading and storing the MIB statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 303: Baseline Ppp Interface
Chapter 3: B Commands baseline ppp interface baseline ppp interface { atm | fastEthernet | gigabitEthernet | serial | mlppp | pos } Syntax interfaceSpecifier Command introduced before JUNOSe Release 7.1.0. Release Information fastEthernet and gigabitEthernet keywords added in JUNOSe Release 11.0.0 Sets a statistics baseline for PPP interfaces.
Page 304: Baseline Pppoe Interface
JUNOSe 11.1.x Command Reference Guide A to M baseline pppoe interface baseline pppoe interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for PPPoE interfaces, subinterfaces, and/or circuits. The Description router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 305: Baseline Radius
Chapter 3: B Commands baseline radius baseline radius Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for RADIUS statistics. The router implements the baseline Description by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 306: Baseline Radius Dynamic-Request
JUNOSe 11.1.x Command Reference Guide A to M baseline radius dynamic-request baseline radius dynamic-request Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for RADIUS dynamic-request statistics. The router implements Description the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 307: Baseline Radius Relay
Chapter 3: B Commands baseline radius relay baseline radius relay Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for RADIUS relay statistics. The router implements the baseline by Description reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 308: Baseline Section Interface Sonet
JUNOSe 11.1.x Command Reference Guide A to M baseline section interface sonet baseline section interface sonet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a statistics baseline for SONET/SDH statistics at the section layer. The router Description implements the baseline by reading and storing the MIB statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 309: Baseline Show-Delta-Counts
Chapter 3: B Commands baseline show-delta-counts [ no ] baseline show-delta-counts Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to always display the statistics relative to the most recent Description appropriate baseline. The no version removes the configuration. Global Configuration Mode baseline show-delta-counts...
Page 310: Baseline Snmp
JUNOSe 11.1.x Command Reference Guide A to M baseline snmp baseline snmp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for SNMP statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 311: Baseline Sscc
Chapter 3: B Commands baseline sscc baseline sscc Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Sets a baseline for the SRC statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 312: Baseline Suspicious-Control-Flow-Detection Counts
JUNOSe 11.1.x Command Reference Guide A to M baseline suspicious-control-flow-detection counts baseline suspicious-control-flow-detection counts Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Sets a baseline for statistics for suspicious control flow detection. There is no no Description version. Privileged Exec, User Exec Mode baseline suspicious-control-flow-detection counts...
Page 313: Baseline Tacacs
Chapter 3: B Commands baseline tacacs baseline tacacs Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets a baseline for TACACS+ statistics. The router implements the baseline by reading Description and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
Page 314: Baseline Tcp
JUNOSe 11.1.x Command Reference Guide A to M baseline tcp baseline [ ip | ipv6 ] tcp [ vrf vrfName ] [ localAddress localPort remoteAddress Syntax remotePort ] Command introduced in JUNOSe Release 7.2.0. Release Information ip keyword made optional in JUNOSe Release 7.2.0. ipv6 keyword added in JUNOSe Release 7.2.0.
Page 315: Bert
Chapter 3: B Commands bert bert pattern pattern interval time [ unframed ] Syntax no bert Command introduced before JUNOSe Release 7.1.0. Release Information Enables bit error rate tests using the specified pattern on T3 interfaces on channelized Description and unchannelized T3 modules. The no version stops the test that is running. NOTE: The BERT patterns supported can vary depending on the line module and I/O module assembly you are using.
Page 316: Bfd Adapt
JUNOSe 11.1.x Command Reference Guide A to M bfd adapt [ no ] bfd adapt Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Enables all BFD sessions to adapt timer intervals on all virtual routers on the router. Description The no version disables subsequent BFD sessions from adapting timer intervals without resetting any already adapted intervals.
Page 317: Bgp Advertise-Best-External-To-Internal
Chapter 3: B Commands bgp advertise-best-external-to-internal [ no ] bgp advertise-best-external-to-internal Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Causes the BGP selection process to select two best routes to every destination. BGP Description advertises to external peers the best route selected from the complete set of routes known to that destination.
Page 318: Bgp Advertise-Inactive
JUNOSe 11.1.x Command Reference Guide A to M bgp advertise-inactive [ no ] bgp advertise-inactive Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the advertisement of inactive BGP received routes routes that are considered Description by BGP to be “ best routes” and therefore are present in the IP forwarding table, but that are not being used for forwarding.
Page 319: Bgp Always-Compare-Med
Chapter 3: B Commands bgp always-compare-med [ no ] bgp always-compare-med Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the comparison of the MED for paths from neighbors in different ASs. The Description no version disables the feature. Router Configuration Mode bgp always-compare-med...
Page 320: Bgp Bestpath Med Confed
JUNOSe 11.1.x Command Reference Guide A to M bgp bestpath med confed [ no ] bgp bestpath med confed Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that BGP considers the MED when comparing routes originated from Description different sub-ASs within the confederation to which this BGP speaker belongs.
Page 321: Bgp Bestpath Missing-As-Worst
Chapter 3: B Commands bgp bestpath missing-as-worst [ no ] bgp bestpath missing-as-worst Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that a route with a MED is always considered to be better than a route Description without a MED by causing the missing MED attribute to have a value of infinity. The no version restores the default state, where the missing MED attribute is considered to have a value of zero.
Page 322: Bgp Client-To-Client Reflection
JUNOSe 11.1.x Command Reference Guide A to M bgp client-to-client reflection [ no ] bgp client-to-client reflection Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Restores route reflection from a BGP route reflector to clients. The no version disables Description client-to-client reflection.
Page 323: Bgp Cluster-Id
Chapter 3: B Commands bgp cluster-id bgp cluster-id { clusterId | ipAddress } Syntax no bgp cluster-id [ clusterId | ipAddress ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures a cluster ID if the BGP cluster has more than one route reflector. The no Description version causes BGP to use the router ID as the cluster ID.
Page 324: Bgp Confederation Identifier
JUNOSe 11.1.x Command Reference Guide A to M bgp confederation identifier bgp confederation identifier autonomousSystem Syntax no bgp confederation identifier [ autonomousSystem ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures a BGP confederation identifier. The no version removes a BGP Description confederation identifier.
Page 325: Bgp Confederation Peers
Chapter 3: B Commands bgp confederation peers bgp confederation peers { autonomousSystem [ autonomousSystem ]* | Syntax filter-list filterListName } no bgp confederation peers [ autonomousSystem [ autonomousSystem ]* | filter-list filterListName ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the sub-ASs that belong to a confederation by listing individual AS numbers Description or by reference to an AS-path access list (the filter list).
Page 326: Bgp Dampening
JUNOSe 11.1.x Command Reference Guide A to M bgp dampening [ no ] bgp dampening [ halfLife [ reuse suppress maxSuppressTime Syntax [ halfLifeUnreachable ] ] ] [ route-map mapTag ] Command introduced before JUNOSe Release 7.1.0. Release Information Enables BGP route dampening. The router assesses a penalty of 1000 each time a Description route flaps and adds this to any previously accumulated penalty value.
Page 327: Bgp Default Ipv4-Unicast
Chapter 3: B Commands bgp default ipv4-unicast [ no ] bgp default ipv4-unicast Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Causes all neighbors subsequently created with the neighbor remote-as or neighbor Description peer-group commands to be automatically activated in the IPv4 unicast address family.
Page 328: Bgp Default Local-Preference
JUNOSe 11.1.x Command Reference Guide A to M bgp default local-preference bgp default local-preference value Syntax no bgp default local-preference [ value ] Command introduced before JUNOSe Release 7.1.0. Release Information Changes the default local preference value. Generally, the default value of 100 allows Description you to easily define a particular path as less preferable than paths with no local preference attribute.
Page 329: Bgp Default Route-Target Filter
Chapter 3: B Commands bgp default route-target filter [ no ] bgp default route-target filter Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Controls whether incoming BGP routes are filtered according to membership in Description route-target communities. Automatic filtering is enabled by default. The no version disables automatic filtering.
Page 330: Bgp Enforce-First-As
JUNOSe 11.1.x Command Reference Guide A to M bgp enforce-first-as [ no ] bgp enforce-first-as Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Forces BGP to compare the configured remote AS number of an external peer with Description the first AS in the AS path of routes received from the peer. If the AS numbers do not match, BGP sends the peer an error message.
Page 331: Bgp Fast-External-Fallover
Chapter 3: B Commands bgp fast-external-fallover [ no ] bgp fast-external-fallover Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Automatically brings down a BGP session to any adjacent external peer immediately Description after the link fails (as opposed to waiting for the TCP connection to fail or the hold timer to expire).
Page 332: Bgp Graceful-Restart
JUNOSe 11.1.x Command Reference Guide A to M bgp graceful-restart [ no | default ] bgp graceful-restart Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the BGP graceful restart capability globally, which enables BGP to maintain Description its forwarding state during a peer restart, avoiding network-wide route flaps and interruptions in traffic forwarding.
Page 333: Bgp Graceful-Restart Path-Selection-Defer-Time-Limit
Chapter 3: B Commands bgp graceful-restart path-selection-defer-time-limit bgp graceful-restart path-selection-defer-time-limit seconds Syntax no bgp graceful-restart path-selection-defer-time-limit [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the maximum time period after a peer session restart during which the best-path Description selection process is deferred.
Page 334: Bgp Graceful-Restart Restart-Time
JUNOSe 11.1.x Command Reference Guide A to M bgp graceful-restart restart-time bgp graceful-restart restart-time seconds Syntax no bgp graceful-restart restart-time [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time period advertised to all peers during which a restart is expected to be Description complete on this BGP speaker.
Page 335: Bgp Graceful-Restart Stalepaths-Time
Chapter 3: B Commands bgp graceful-restart stalepaths-time bgp graceful-restart stalepaths-time seconds Syntax no bgp graceful-restart stalepaths-time [ seconds ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time period after a peer session restart for all peers during which BGP waits Description for an End-of-RIB marker from a peer before flushing all stale routes from that peer.
Page 336: Bgp Log-Neighbor-Changes
JUNOSe 11.1.x Command Reference Guide A to M bgp log-neighbor-changes [ no ] bgp log-neighbor-changes Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Causes BGP to log a message of severity notice to the bgpNeighborChanges log Description whenever a peer enters or leaves the Established state for any reason. No other messages are logged to the bgpNeighborChanges log.
Page 337: Bgp Maxas-Limit
Chapter 3: B Commands bgp maxas-limit bgp maxas-limit limit Syntax no bgp maxas-limit [ limit ] Command introduced before JUNOSe Release 7.1.0. Release Information Causes BGP to check the length of AS paths received in update messages and to not Description forward routes whose AS paths are greater than the specified length.
Page 338: Bgp Redistribute-Internal
JUNOSe 11.1.x Command Reference Guide A to M bgp redistribute-internal [ no ] bgp redistribute-internal Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Authorizes redistribution of internal BGP routes (in addition to external BGP routes) Description into protocols that have BGP route redistribution enabled. This command is not required for IBGP routes within a VRF, for which redistribution is always enabled.
Page 339: Bgp Router-Id
Chapter 3: B Commands bgp router-id bgp router-id ipAddress Syntax no bgp router-id [ ipAddress ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the BGP identifier. The no version restores the router ID as the identifier. Description ipAddress IP address to be used as the BGP identifier; ignored if present in the Options no version Router Configuration...
Page 340: Bgp Shutdown
JUNOSe 11.1.x Command Reference Guide A to M bgp shutdown [ no ] bgp shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Administratively disables BGP. The no version reenables BGP. Description Router Configuration Mode bgp shutdown...
Page 341: Bgp Wait-On-End-Of-Rib
Chapter 3: B Commands bgp wait-on-end-of-rib bgp wait-on-end-of-rib seconds Syntax no bgp wait-on-end-of-rib Command introduced in JUNOSe Release 8.2.0. Release Information Specifies how long BGP waits to receive an End-of-RIB marker sent by route-target Description address family peers to signal the peer has finished advertising route-target membership information.
Page 342: Boolean-Test
JUNOSe 11.1.x Command Reference Guide A to M boolean-test boolean-test { comparison comparisonType | event eventOwner eventName Syntax | startup | value booleanValue } no boolean-test [ comparison | event | startup | value ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines Boolean test values for the trigger that you are configuring, including Description...
Page 343: Boot Backup
Chapter 3: B Commands boot backup boot backup relFilename { cnfFilename | scrFilename | factory-defaults } Syntax no boot backup Command introduced before JUNOSe Release 7.1.0. Release Information Sets the release and the configuration to be used the next (and every subsequent) Description time the boot logic chooses backup mode.
Page 344: Boot Config
JUNOSe 11.1.x Command Reference Guide A to M boot config boot config { cnfFilename [ once ] | scrFilename | running-configuration | Syntax startup-configuration | factory-defaults } no boot config Command introduced before JUNOSe Release 7.1.0. Release Information Specifies how the router obtains its startup configuration. The no version clears a Description previous request to reboot in a specified manner;...
Page 345: Boot Force-Backup
Chapter 3: B Commands boot force-backup [ no ] boot force-backup Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Forces the router to use the backup software release file or router configuration file Description on the next boot. The no version sets the router to use the default release or configuration file on the next boot.
Page 346: Boot Hotfix
JUNOSe 11.1.x Command Reference Guide A to M boot hotfix boot hotfix hfixFilename Syntax no boot hotfix { hfixFilename | all-releases } Command introduced in JUNOSe Release 7.2.0. Release Information Arms the specified hotfix as a startup hotfix that is automatically activated during Description system initialization when the SRP module is reloaded.
Page 347: Boot Revert-Tolerance
Chapter 3: B Commands boot revert-tolerance boot revert-tolerance count time Syntax no boot revert-tolerance Command introduced before JUNOSe Release 7.1.0. Release Information Sets the reversion tolerances that the boot logic uses to determine whether the router Description should use the normal or backup settings. Issuing this command when high availability is enabled results in the system cold-restarting the router and using the backup settings if the tolerance settings are met.
Page 348: Boot Revert-Tolerance Never
JUNOSe 11.1.x Command Reference Guide A to M boot revert-tolerance never boot revert-tolerance never Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the boot logic to never revert to the backup release or configuration. There is Description no no version. Global Configuration Mode boot revert-tolerance never...
Page 349: Boot Subsystem
Chapter 3: B Commands boot subsystem boot [ backup ] subsystem subsysName relFileName Syntax no boot [ backup ] subsystem [ subsysName ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures the selected subsystem to use the specified release the next time the Description subsystem is booted.
Page 350: Boot System
JUNOSe 11.1.x Command Reference Guide A to M boot system boot system relFileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the software release (.rel) file to use on reboot. There is no no version. Description NOTE: In a dual SRP module configuration, when this information is synchronized to the standby SRP module, the standby SRP module is reloaded to boot the specified release.
Page 351: Bridge1483 Dos-Protection-Group
Chapter 3: B Commands bridge1483 dos-protection-group bridge1483 dos-protection-group groupName Syntax no bridge1483 dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches a bridge 1483 denial of service (DoS) protection group to an interface. The Description no version removes the attachment of the DoS protection group from the interface. groupName Name of the DoS protection group;...
Page 352: Bridge1483 Mtu
JUNOSe 11.1.x Command Reference Guide A to M bridge1483 mtu bridge1483 mtu mtuSize Syntax no bridge1483 mtu Command introduced in JUNOSe Release 7.3.0. Release Information Sets the maximum allowable size, in bytes, of the maximum transmission unit (MTU) Description for bridged Ethernet interfaces. The no version restores the default MTU size for bridged Ethernet interfaces, 1518 bytes.
Page 353: Bridge1483 Service-Profile
Chapter 3: B Commands bridge1483 service-profile [ no ] bridge1483 service-profile profileName Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Assigns the specified IP service profile to the interface profile from which a dynamic Description bridged Ethernet interface is created. The IP service profile must be defined in the default virtual router.
Page 354: Bridge
JUNOSe 11.1.x Command Reference Guide A to M bridge [ no ] bridge bridgeGroupName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a bridge group to use for transparent bridging. A bridge group is a named Description collection of network interfaces (ports) on an E Series router that forms a broadcast domain.
Page 355: Bridge Acquire
Chapter 3: B Commands bridge acquire [ no ] bridge { bridgeGroupName | vplsName } acquire Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Configures a bridge group or VPLS instance to acquire dynamically learned MAC Description addresses.
Page 356: Bridge Address
JUNOSe 11.1.x Command Reference Guide A to M bridge address bridge { bridgeGroupName | vplsName } address macAddress Syntax { forward interfaceType interfaceSpecifier | discard } no bridge { bridgeGroupName | vplsName } address macAddress Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0.
Page 357 Chapter 3: B Commands Configuring Optional Attributes for VPLS Instances in the JUNOSe BGP and MPLS Related Topics Configuration Guide bridge address...
Page 358: Bridge Aging-Time
JUNOSe 11.1.x Command Reference Guide A to M bridge aging-time bridge { bridgeGroupName | vplsName } aging-time seconds Syntax no bridge { bridgeGroupName | vplsName } aging-time Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Sets the aging time of a dynamic (learned) entry in the forwarding table of a bridge Description group or VPLS instance.
Page 359: Bridge Crb
Chapter 3: B Commands bridge crb [ no ] bridge crb Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables concurrent routing and bridging (CRB) for all bridge groups configured on Description the router except those bridge groups configured as VPLS instances. When CRB is enabled, the router can route a protocol among a group of interfaces in one bridge group and concurrently bridge the same protocol among a separate group of interfaces in a different bridge group on the router.
Page 360: Bridge-Group
JUNOSe 11.1.x Command Reference Guide A to M bridge-group bridge-group { bridgeGroupName | vplsName } Syntax [ subscriber-trunk | snmp-trap link-status | learn addressCount ] no bridge-group { bridgeGroupName | vplsName } [ subscriber-trunk | snmp-trap link-status | learn ] Command introduced before JUNOSe Release 7.1.0.
Page 361: Bridge Learn
Chapter 3: B Commands bridge learn bridge { bridgeGroupName | vplsName } learn addressCount Syntax no bridge { bridgeGroupName | vplsName } learn Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Sets the maximum number of dynamic MAC addresses that a bridge group or VPLS Description instance can learn.
Page 362: Bridge Route
JUNOSe 11.1.x Command Reference Guide A to M bridge route [ no ] bridge bridgeGroupName route { ip | mpls | pppoe } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables routing of IP, MPLS, or PPPoE packets in a specified bridge group when Description concurrent routing and bridging (CRB) is enabled for all bridge groups on the router.
Page 363: Bridge Snmp-Trap Link-Status
Chapter 3: B Commands bridge snmp-trap link-status [ no ] bridge { bridgeGroupName | vplsName } snmp-trap link-status Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Enables SNMP link-status processing for all network interfaces associated with a Description bridge group or VPLS instance.
Page 364: Bridge Subscriber-Policy
JUNOSe 11.1.x Command Reference Guide A to M bridge subscriber-policy bridge { bridgeGroupName | vplsName } subscriber-policy subscriberPolicyName Syntax no bridge { bridgeGroupName | vplsName } subscriber-policy [ subscriberPolicyName ] Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Associates the subscriber (client) interfaces that belong to a bridge group or to a VPLS Description instance with a nondefault subscriber policy.
Page 365: Bridge Vpls Rd
Chapter 3: B Commands bridge vpls rd bridge vplsName vpls rd routeDistinguisher Syntax no bridge vplsName vpls rd Command introduced in JUNOSe Release 7.1.0. Release Information Specifies the unique two-part route distinguisher for a VPLS instance that uses BGP Description as the signaling protocol.
Page 366 JUNOSe 11.1.x Command Reference Guide A to M Configuring VPLS Instances with BGP Signaling in the JUNOSe BGP and MPLS Related Topics Configuration Guide bridge vpls rd...
Page 367: Bridge Vpls Route-Target
Chapter 3: B Commands bridge vpls route-target [ no ] bridge vplsName vpls route-target { import | export | both } extendedCommunity Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Creates or adds to a list of VPN extended communities that the router uses to Description determine which routes are imported by a VPLS instance that uses BGP as the signaling protocol.
Page 368 JUNOSe 11.1.x Command Reference Guide A to M Configuring VPLS Instances with BGP Signaling in the JUNOSe BGP and MPLS Related Topics Configuration Guide bridge vpls route-target...
Page 369: Bridge Vpls Site-Name Site-Id
Chapter 3: B Commands bridge vpls site-name site-id [ no ] bridge vplsName vpls site-name siteName site-id siteId Syntax [ multi-homed priority priority ] Command introduced in JUNOSe Release 7.1.0. Release Information multi-homed priority keywords and priority variable added in JUNOSe Release 9.3.0. Configures a customer site name and a unique site identifier that belongs to the Description specified VPLS instance that uses BGP as the signaling protocol.
Page 370: Bridge Vpls Site-Range
JUNOSe 11.1.x Command Reference Guide A to M bridge vpls site-range bridge vplsName vpls site-range siteRange Syntax no bridge vplsName vpls site-range Command introduced in JUNOSe Release 7.1.0. Release Information Configures the maximum number of customer sites that can participate in the Description specified VPLS domain that uses BGP as the signaling protocol.
Page 371: Bridge Vpls Transport-Virtual-Router
Chapter 3: B Commands bridge vpls transport-virtual-router bridge vplsName vpls transport-virtual-router virtualRouterName Syntax no bridge vplsName vpls transport-virtual-router Command introduced in JUNOSe Release 7.1.0. Release Information Configures the transport virtual router for a VPLS instance that uses either BGP or Description LDP as the signaling protocol.
Page 372: Broadcast
JUNOSe 11.1.x Command Reference Guide A to M broadcast broadcast { permit | deny } Syntax no broadcast Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the subscriber policy for the broadcast protocol to define whether the Description subscriber (client) interfaces that belongs to a bridge group or to a VPLS instance forward (permit) or filter (deny) broadcast packets.
Page 373: Buffer-Weight
Chapter 3: B Commands buffer-weight buffer-weight bufferWeight Syntax no buffer-weight Command introduced before JUNOSe Release 7.1.0. Release Information Sets the buffer weight of the queue. The no version returns the queue to its default Description buffer weight. bufferWeight Range 1–63; default value is 8 Options Queue Profile Configuration Mode...
Page 374: Bulkstats
JUNOSe 11.1.x Command Reference Guide A to M bulkstats no bulkstats Syntax This command has only a no version. See the no bulkstats command for a complete Description description. Router Configuration Mode bulkstats...
Page 375: Bulkstats Collector
Chapter 3: B Commands bulkstats collector bulkstats collector collectorIndex Syntax [ collect-mode { auto-xfer | on-file-full | manual-xfer } | description descrip | interval intrvl | max-size maxSize | primary-receiver primRecvIndex | secondary-receiver secRecvIndex | single-interval ] no bulkstats collector collectorIndex [ collect-mode | description | interval | max-size |primary-receiver | secondary-receiver | single-interval ]* Command introduced before JUNOSe Release 7.1.0.
Page 376: Bulkstats File-Format Endofline-Lf
JUNOSe 11.1.x Command Reference Guide A to M bulkstats file-format endOfLine-LF [ no ] bulkstats file-format endOfLine-LF Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes the carriage return (CR) and leaves only a line feed (LF) at the end of each Description line in the bulkstats file.
Page 377: Bulkstats Interfaces Description-Format Common
Chapter 3: B Commands bulkstats interfaces description-format common [ no ] bulkstats interfaces description-format common Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the conventional industry method of encoding the SNMP ifDescr object that Description the bulkstats application reports. The no version returns the encoding method to a proprietary encoding scheme.
Page 378: Bulkstats Interfaces Rfc1213
JUNOSe 11.1.x Command Reference Guide A to M bulkstats interfaces rfc1213 [ no ] bulkstats interfaces rfc1213 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables RFC 1213 interface numbering mode on bulkstats. The no version disables Description RFC 1213 interface numbering mode on bulkstats. Global Configuration Mode bulkstats interfaces rfc1213...
Page 379: Bulkstats Interface-Type
Chapter 3: B Commands bulkstats interface-type [ no ] bulkstats interface-type interfaceType [ interfaceSpecifier ]* Syntax [ collector collectorIndex ] Command introduced before JUNOSe Release 7.1.0. Release Information mplsL2shim, mplsMajor, and mplsMinor keywords added in JUNOSe Release 8.2.0. Configures the interface type on which you want to collect statistics. The no version Description deletes the interface type from bulkstats collection.
Page 380: Bulkstats Receiver Remote-Name
JUNOSe 11.1.x Command Reference Guide A to M bulkstats receiver remote-name bulkstats receiver receiverIndex remote-name remoteName.sts Syntax [ receiverAttrib [ receiverAttrib ]* ] no bulkstats receiver receiverIndex [ remote-name remoteName ] Command introduced before JUNOSe Release 7.1.0. Release Information Configures the bulk statistics receiver parameters. The no version deletes the receiver. Description receiverIndex Number in the range 1–65535 that identifies the receiver of the Options...
Page 381: Bulkstats Schema
Chapter 3: B Commands bulkstats schema bulkstats schema schemaIndex [ collector collectorIndex ] Syntax no bulkstats schema schemaIndex Command introduced before JUNOSe Release 7.1.0. Release Information Configures the schema for collecting bulk statistics. The no version removes the Description schema. schemaIndex—Identifier for the schema in the range 1–65535 Options collectorIndex—Identifier for the collector in the range 1–65535...
Page 382: Bulkstats Schema Subtree
JUNOSe 11.1.x Command Reference Guide A to M bulkstats schema subtree bulkstats schema schemaIndex subtree Syntax { if-stack | if-stats { subtreelist [ ifstatsList [ ifstatsList ]* ] | if-create-delete-time-stats interfaceType interfaceType } | igmp | system } bulkstats schema schemaIndex subtree { if-stack | if-stats | igmp [ subtreelist igmpList [ igmpList ]* ] | system } no bulkstats schema schemaIndex Command introduced before JUNOSe Release 7.1.0.
Page 383: Bulkstats Schema Subtree Policy
Chapter 3: B Commands bulkstats schema subtree policy bulkstats schema schemaIndex subtree policy [ policy-name policyName ] Syntax [ policy-type policyType ] [ policy-subtreelist policyList [ policyList ]* ] no bulkstats schema schemaIndex Command introduced before JUNOSe Release 7.1.0. Release Information Configures the schema to collect statistics on a specific policy, a type of policy, or Description based on color-coded tags applied by a policy.
Page 384: Bulkstats Schema Subtree Qos
JUNOSe 11.1.x Command Reference Guide A to M bulkstats schema subtree qos bulkstats schema schemaIndex subtree qos [ subtreelist qosList [ qosList ]*| Syntax export-summarized-stats ] no bulkstats schema schemaIndex Command introduced in JUNOSe Release 11.1.0. Release Information Configures the bulk statistics schema to collect QoS statistics and configuration Description information on egress queues belonging to different interface types.
Page 385 Chapter 3: B Commands parent-shared-shaping-rate Configures QoS schema to export the shared shaping rate enabled on the parent interface in the scheduling hierarchy parent-weight Configures QoS schema to export the aggregate weight of the parent interface queue-length Configures QoS schema to export the queue length attribute queue-profile Configures QoS schema to export the queue profile name red-dropped-bytes Configures QoS schema to export the number of bytes of red traffic that was dropped on the queue...
Page 386: Bulkstats Traps
JUNOSe 11.1.x Command Reference Guide A to M bulkstats traps bulkstats traps { nearly-full [ threshold ] | full } Syntax no bulkstats traps { nearly-full | full } Command introduced before JUNOSe Release 7.1.0. Release Information Configures the bulkstats traps. The no version disables the trap. Description nearly-full Specifies a percentage less than 100 percent Options...
Page 387: Bulkstats Virtual-Router-Group
Chapter 3: B Commands bulkstats virtual-router-group [ no ] bulkstats virtual-router-group collector collectorindex VRnames Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Configures the bulkstats for virtual router groups. The no version prevents bulkstats Description from being reported for virtual router groups. virtual-router-group Specifies the name or unique index number that contains Options from 1 to the maximum number of routers supported in the system...
Page 388: Bundled-Group-Id
JUNOSe 11.1.x Command Reference Guide A to M bundled-group-id [ no ] bundled-group-id bundledGroupID Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a bundled group identifier when no endpoint discriminator is available for Description bundled sessions using an L2TP destination host profile. When multiple tunnel-service modules are installed in a router that is deployed as an LNS and the tunnel sessions carry MLPPP, the router can use the bundled group identifier when selecting a tunnel-service module for bundled sessions.
Page 389: Bundled-Group-Id-Overrides-Mlppp-Ed
Chapter 3: B Commands bundled-group-id-overrides-mlppp-ed [ no ] bundled-group-id-overrides-mlppp-ed Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the router uses the bundled group identifier you assigned using the Description bundled-group-id command when selecting a tunnel-service module instead of any endpoint discriminator.
Page 390 JUNOSe 11.1.x Command Reference Guide A to M bundled-group-id-overrides-mlppp-ed...
Page 391: Chapter 4 C Commands
Chapter 4 C Commands...
Page 392: Cache Entries
JUNOSe 11.1.x Command Reference Guide A to M cache entries cache entries entryNumber Syntax no cache entries Command introduced in JUNOSe Release 8.1.0. Release Information Sets the number of entries in the aggregation cache. The no version sets the number Description of entries to the default value.
Page 393: Cache Timeout
Chapter 4: C Commands cache timeout cache timeout { active activeTimer | inactive inactiveTimer } Syntax no cache timeout Command introduced in JUNOSe Release 8.1.0. Release Information Sets the active and inactive aging timers. The no version resets the default values. Description activeTimer Active aging timer in the range 1 60 Options...
Page 394: Cablelength
JUNOSe 11.1.x Command Reference Guide A to M cablelength cablelength length Syntax no cablelength Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the length of the cable, which determines power requirements. The no Description version uses the default value, 0 feet. length Cable length in the range 0–450 feet Options...
Page 395: Cbr
Chapter 4: C Commands cbr pcr Syntax no cbr Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, configures the constant bit rate (CBR) service category Description on an ATM PVC.
Page 396: Channelized
JUNOSe 11.1.x Command Reference Guide A to M channelized [ no ] channelized Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a port on the CT3/T3-F0 line module and associated I/O module to support Description channelized T3 operation. The no version configures the port for unchannelized operation.
Page 397: Check-Disk
Chapter 4: C Commands check-disk check-disk [ repair ] [ disk0 | disk1 ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information disk0 and disk1 keywords added in JUNOSe Release 7.2.0. Privileged Exec mode added in JUNOSe Release 8.0.0. Finds and repairs structural inconsistencies and damage in the DOS file system in Description unmounted flash cards on the primary SRP module.
Page 398: Check-Vpn-Next-Hops
JUNOSe 11.1.x Command Reference Guide A to M check-vpn-next-hops [ no ] check-vpn-next-hops Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables a BGP speaker to take the reachability of the next hop on received VPNv4 Description or VPNv6 routes into account when it determines the best route to a prefix. Checking the reachability is disabled by default.
Page 399: Classifier-Group
Chapter 4: C Commands classifier-group classifier-group { * | classifierName } [ precedence precValue ] [ parent-group Syntax parentGroupName ] [ external parent-group externalParentGroupName parameter parameterName ] no classifier-group { * | classifierName ] Command introduced before JUNOSe Release 7.1.0. Release Information parent-group keyword and parentGroupName variable added in JUNOSe Release 7.2.0.
Page 400 JUNOSe 11.1.x Command Reference Guide A to M Configuring CLI-Based Mirroring classifier-group...
Page 401: Class-Int
Chapter 4: C Commands class-int class-int vcClassName Syntax no class-int [ vcClassName ] Command introduced in JUNOSe Release 7.3.0. Release Information When issued from Interface Configuration mode, assigns a previously configured VC Description class to an ATM major interface. When issued from Subinterface Configuration mode, assigns a previously configured VC class to a static ATM 1483 subinterface.
Page 402: Class-Vc
JUNOSe 11.1.x Command Reference Guide A to M class-vc class-vc vcClassName Syntax no class-vc [ vcClassName ] Command introduced in JUNOSe Release 7.3.0. Release Information Assigns a previously configured VC class to an individual ATM data PVC. The class-vc Description command is valid only for data PVCs created with the pvc command;...
Page 403: Cleanup-Timeout-Factor
Chapter 4: C Commands cleanup-timeout-factor cleanup-timeout-factor lostRefreshes Syntax no cleanup-timeout-factor Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the number of refresh messages that can be lost before the PATH or RESV Description state is ended. The no version restores the default value, 3. lostRefreshes Number of lost refresh messages Options RSVP Profile Configuration...
Page 404: Clear Access-List
JUNOSe 11.1.x Command Reference Guide A to M clear access-list clear access-list [ accessListName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears counters for entries in IP access lists. There is no no version. Description accessListName Name of the access list; string of 1–32 alphanumeric characters Options Privileged Exec Mode...
Page 405: Clear Arp
Chapter 4: C Commands clear arp clear [ ip ] arp [ vrf vrfName ] { ipAddress interfaceType interfaceSpecifier | * } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears entries from the ARP cache. There is no no version. Description vrfName Name of the VRF;...
Page 406: Clear Bfd Adapted-Intervals
JUNOSe 11.1.x Command Reference Guide A to M clear bfd adapted-intervals clear bfd adapted-intervals Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Resets adapted timer intervals for all BFD sessions on the router. There is no no Description version. Global Configuration Mode clear bfd adapted-intervals...
Page 407: Clear Bfd Session
Chapter 4: C Commands clear bfd session clear bfd session [ address ipAddress | discriminator discriminatorID ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Restarts all BFD sessions or a specified BFD session. There is no no version. Description ipAddress IP address of the destination to which the session has been established Options...
Page 408: Clear Bgp Ipv6
JUNOSe 11.1.x Command Reference Guide A to M clear bgp ipv6 clear bgp ipv6 [ unicast | multicast | vpnv6 | route-target signaling ] Syntax [ ipAddress | ipv6Address | peer-group peerGroupName | * ] [ vrf vrfName ] [ soft [ in | out ] ] Command introduced before JUNOSe Release 7.1.0.
Page 409: Clear Bgp Ipv6 Dampening
Chapter 4: C Commands clear bgp ipv6 dampening To clear IPv6-specific information for only the route-target address family: Syntax clear bgp ipv6 route-target signaling { dampening | flap-statistics } [ rtfPrefix | rtfAddress ] To clear IPv6-specific information for any case other than for the route-target address family: clear bgp ipv6 [ vrf vrfName ] [ unicast | multicast | vpnv6 ] { dampening | flap-statistics } [ ipv6Prefix ]...
Page 410 JUNOSe 11.1.x Command Reference Guide A to M unicast Clears the unicast routing table; the default option multicast—Clears the multicast routing table vpnv6—Clears the VPNv6 unicast routing and forwarding table ipv6Prefix IPv6 network for which to clear dampening information Privileged Exec Mode clear bgp ipv6 dampening...
Page 411: Clear Bgp Ipv6 Dynamic-Peers
Chapter 4: C Commands clear bgp ipv6 dynamic-peers clear bgp ipv6 [ ipAddress | ipv6Address | peer-group peerGroupName | * ] Syntax [ vrf vrfName ] dynamic-peers Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Removes all IPv6-specific dynamic peers in the specified scope.
Page 412: Clear Bgp Ipv6 Redistribution
JUNOSe 11.1.x Command Reference Guide A to M clear bgp ipv6 redistribution clear bgp ipv6 [ unicast | multicast ] redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all IPv6 routes that have been redistributed into BGP. There is no no version. Description unicast Clears the unicast routing table;...
Page 413: Clear Bgp Ipv6 Wait-End-Of-Rib
Chapter 4: C Commands clear bgp ipv6 wait-end-of-rib clear bgp ipv6 [ unicast | multicast | vpnv6 | route-target signaling ] [ vrf vrfName ] Syntax [ ipAddress | ipv6Address | peer-group peerGroupName | * ] wait-end-of-rib Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0.
Page 414: Clear Bridge
JUNOSe 11.1.x Command Reference Guide A to M clear bridge clear bridge { bridgeGroupName | vplsName } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Removes all dynamic (learned) MAC address entries from the forwarding table for Description the specified bridge group or VPLS instance .
Page 415: Clear Bridge Address
Chapter 4: C Commands clear bridge address clear bridge { bridgeGroupName | vplsName } address macAddress Syntax Command introduced in JUNOSe Release 7.1.0. Release Information vplsName variable added in JUNOSe Release 7.1.0. Removes a specific dynamic (learned) MAC address entry from the forwarding table Description for the specified bridge group or VPLS instance.
Page 416: Clear Bridge Interface
JUNOSe 11.1.x Command Reference Guide A to M clear bridge interface clear bridge interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes from the forwarding table all dynamic (learned) MAC address entries for Description a specified network interface that belongs to a bridge group or to a VPLS instance . There is no no version.
Page 417: Clear Bridge Interface Vpls
Chapter 4: C Commands clear bridge interface vpls clear bridge interface vpls vplsName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Removes from the forwarding table for a VPLS instance all dynamic (learned) MAC Description address entries on the VPLS virtual core interface, which represents all of the MPLS tunnels from the router to the remote VPLS edge (VE) devices.
Page 418: Clear Egress-Queue
JUNOSe 11.1.x Command Reference Guide A to M clear egress-queue clear egress-queue interfaceType interfaceSpecifier [ explicit ] Syntax [ traffic-class trafficClassName ] Command introduced before JUNOSe Release 7.1.0. Release Information Clears egress queue statistics for the all queues bound to the specified interface for Description queues stacked at and above the interface, or only for the specified traffic class.
Page 419: Clear Fabric-Queue
Chapter 4: C Commands clear fabric-queue clear fabric-queue [ traffic-class trafficClassName ] [ egress-slot egressSlot ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears statistics for all fabric queues or for the specified traffic-class, egress-slot, or Description both. There is no no version. trafficClassName Name of a traffic class for which fabric-queue statistics will Options be cleared...
Page 420: Clear Ip Bgp
JUNOSe 11.1.x Command Reference Guide A to M clear ip bgp clear ip bgp [ ipAddress | ipv6Address | peer-group peerGroupName Syntax | * ] [ vrf vrfName ] [ ipv4 unicast | ipv4 multicast | vpnv4 unicast | l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] soft [ in [ prefix-filter ] | out ] ] Command introduced before JUNOSe Release 7.1.0.
Page 421 Chapter 4: C Commands Privileged Exec Mode Clearing BGP Attributes for L2VPNs Clearing BGP Attributes for VPLS in the JUNOSe Related Topics BGP and MPLS Configuration Guide clear ip bgp...
Page 422: Clear Ip Bgp Dampening
JUNOSe 11.1.x Command Reference Guide A to M clear ip bgp dampening To clear IP-specific information for only the route-target address family: Syntax clear ip bgp route-target signaling { dampening | flap-statistics } [ rtfPrefix | rtfAddress ] To clear IP-specific information for any case other than for the route-target address family: clear ip bgp [ vrf vrfName ] [ ipv4 unicast | ipv4 multicast | vpnv4 unicast |...
Page 423 Chapter 4: C Commands rtfAddress rtfPrefix with a prefix length of 96; representing the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber: extendedCommunity (for example, 320:320:524 or 320:50.2.3.4:524) vrfName Name of a virtual routing and forwarding instance to clear ipv4 unicast Clears the IPv4 unicast routing table; the default option ipv4 multicast—Clears the IPv4 multicast routing table vpnv4 unicast—Clears the VPNv4 unicast routing and forwarding table l2vpn all Clears the L2VPN reachability information for all VPLS and VPWS...
Page 424: Clear Ip Bgp Dynamic-Peers
JUNOSe 11.1.x Command Reference Guide A to M clear ip bgp dynamic-peers clear ip bgp [ ipAddress | ipv6Address | peer-group peerGroupName Syntax | * ] [ vrf vrfName ] dynamic-peers Command introduced before JUNOSe Release 7.1.0. Release Information ipv6Address variable added in JUNOSe Release 8.0.0. Removes all dynamic peers in the specified scope.
Page 425: Clear Ip Bgp Redistribution
Chapter 4: C Commands clear ip bgp redistribution clear ip bgp [ ipv4 { unicast | multicast } ] redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reapplies policy to routes that have been redistributed into BGP. There is no no Description version.
Page 426: Clear Ip Bgp Wait-End-Of-Rib
JUNOSe 11.1.x Command Reference Guide A to M clear ip bgp wait-end-of-rib clear ip bgp [ ipAddress | ipv6Address | peer-group peerGroupName Syntax | * ] [ vrf vrfName ] [ ipv4 unicast | ipv4 multicast | vpnv4 unicast | l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ] wait-end-of-rib Command introduced before JUNOSe Release 7.1.0.
Page 427: Clear Ip Demux
Chapter 4: C Commands clear ip demux clear ip demux Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all dynamically created demultiplexer table entries associated with route-map Description processing of the set ip source-prefix command. There is no no version. Interface Configuration Mode clear ip demux...
Page 428: Clear Ip Dhcp-Local Binding
JUNOSe 11.1.x Command Reference Guide A to M clear ip dhcp-local binding clear ip dhcp-local binding ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the specified IP DHCP address binding. There is no no version. Description NOTE: This command is deprecated and might be removed completely in a future release.
Page 429: Clear Ip Dvmrp Routes
Chapter 4: C Commands clear ip dvmrp routes clear ip dvmrp routes [ ipAddress [ addressMask ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears DVMRP routes from the routing table. There is no no version. Description ipAddress—IP address for which longest match is cleared Options addressMask—Address mask to be applied to the IP address...
Page 430: Clear Ip Flow Stats
JUNOSe 11.1.x Command Reference Guide A to M clear ip flow stats clear ip flow stats Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all entries from all flow caches on the router. There is no no version. Description CAUTION: Using this command may temporarily disrupt flow data collection.
Page 431: Clear Ip Interface
Chapter 4: C Commands clear ip interface clear ip interface [ vrf vrfName ] interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters on the specified IP interface. The default is all interface types Description and all interfaces.
Page 432: Clear Ip Isis Redistribution
JUNOSe 11.1.x Command Reference Guide A to M clear ip isis redistribution clear ip isis redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all the routes that have previously been redistributed into IS-IS and redistributes Description them using the current policy configuration. There is no no version. Privileged Exec Mode clear ip isis redistribution...
Page 433: Clear Ip Mobile Binding
Chapter 4: C Commands clear ip mobile binding clear ip mobile binding { nai { user@realm | @realm | @ } | ipAddress | all } Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Clears the binding table in a virtual router or a specified binding determined by the Description mobile node home address or network access identifier (NAI).
Page 434: Clear Ip Mroute
JUNOSe 11.1.x Command Reference Guide A to M clear ip mroute clear ip mroute { * | grpAddress [ sourceAddress ] } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all or the specified multicast forwarding entries. There is no no version. Description * Clears all IP multicast forwarding entries Options...
Page 435: Clear Ip Nat Translation
Chapter 4: C Commands clear ip nat translation clear ip nat translation * Syntax clear ip nat translation inside insideGlobalIpAddress insideLocalIpAddress clear ip nat translation outside outsideLocalIpAddress outsideGlobalIpAddress clear ip nat translation { icmp | tcp | udp } inside insideGlobalIpAddress insideGlobalPort insideLocalIpAddress insideLocalPort clear ip nat translation { gre | icmp | tcp | udp } inside insideGlobalIpAddress * insideLocalIpAddress * clear ip nat translation { icmp | tcp | udp }...
Page 436 JUNOSe 11.1.x Command Reference Guide A to M outsideGlobalPort Outside global port number outsideLocalPort Outside local port number Privileged Exec Mode clear ip nat translation...
Page 437: Clear Ip Ospf Database
Chapter 4: C Commands clear ip ospf database clear ip ospf database Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Deletes all entries from the OSPF link-state database and resets all adjacencies. There Description is no no version. Privileged Exec Mode clear ip ospf database...
Page 438: Clear Ip Ospf Neighbor
JUNOSe 11.1.x Command Reference Guide A to M clear ip ospf neighbor clear ip ospf neighbor [ neighborAddress ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Clears or resets adjacency with a specified neighbor session. There is no no version. Description NOTE: When OSPF is configured and running over an NBMA network, do not issue the clear ip ospf neighbor command simultaneously on both ends of the OSPF link.
Page 439: Clear Ip Ospf Redistribution
Chapter 4: C Commands clear ip ospf redistribution clear ip ospf redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears and readvertises all of the routes that have been previously redistributed into Description OSPF. Exercise caution when using this command as it purges all external LSAs and reoriginates.
Page 440: Clear Ip Pim Auto-Rp
JUNOSe 11.1.x Command Reference Guide A to M clear ip pim auto-rp clear ip pim auto-rp [ ipAddress ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the group-to-RP router mappings the router learned via autoRP. There is no Description no version.
Page 441: Clear Ip Pim Interface Count
Chapter 4: C Commands clear ip pim interface count clear ip pim interface [ interfaceType interfaceSpecifier ] count Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters for multicast packet statistics on all interfaces or the specified Description interface.
Page 442: Clear Ip Pim Remote-Neighbor Count
JUNOSe 11.1.x Command Reference Guide A to M clear ip pim remote-neighbor count clear ip pim remote-neighbor [ ipAddress ] count Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters for remote neighbor statistics on all interfaces or the specified Description interface.
Page 443: Clear Ip Prefix-List
Chapter 4: C Commands clear ip prefix-list clear ip prefix-list [ listName [ network/length] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all hit counts in the prefix lists, the specified prefix list, or the specified entry Description from the specified prefix list.
Page 444: Clear Ip Prefix-Tree
JUNOSe 11.1.x Command Reference Guide A to M clear ip prefix-tree clear ip prefix-tree [ treeName [ network/length ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all prefix trees, the specified prefix tree, or the specified entry from the Description specified prefix tree.
Page 445: Clear Ip Rip Dynamic-Interfaces
Chapter 4: C Commands clear ip rip dynamic-interfaces clear ip rip dynamic-interfaces Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all existing dynamic, unnumbered interfaces that were created since issuing Description the ip rip copy-to-dynamic command. There is no no version. Privileged Exec, User Exec Mode clear ip rip dynamic-interfaces...
Page 446: Clear Ip Rip Redistribution
JUNOSe 11.1.x Command Reference Guide A to M clear ip rip redistribution clear ip rip redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all the routes that have previously been redistributed into RIP. There is no no Description version.
Page 447: Clear Ip Routes
Chapter 4: C Commands clear ip routes clear ip routes [ vrf vrfName ] { * | ipAddress ipMask } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears a specified route or all dynamic routes from the routing table of a specified Description VRF or all VRFs.
Page 448: Clear Ip Routes Download
JUNOSe 11.1.x Command Reference Guide A to M clear ip routes download For a specific VRF Syntax clear ip routes download [ vrf vrfName ] { ipAddress ipMask | * } For all virtual routers clear ip routes download { all | reload } Command introduced in JUNOSe Release 8.1.0.
Page 449: Clear Ip Tunnel-Routes
Chapter 4: C Commands clear ip tunnel-routes clear ip tunnel-routes [ vrf vrfName ] { * | ipAddress ipMask } Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Clears and then refreshes a specified route or all dynamic routes from the tunnel Description routing table of the virtual router or a specified VRF.
Page 450: Clear Ipv6 Access-List
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 access-list clear ipv6 access-list [ accessListName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears counters for entries in IP access lists. There is no no version. Description accessListName Name of the access list;...
Page 451: Clear Ipv6 Bfd Session
Chapter 4: C Commands clear ipv6 bfd session clear ipv6 bfd session [ address ipv6Address ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Restarts all IPv6 BFD sessions or a specified BFD session. There is no no version. Description ipAddress IP address of the destination to which the session has been established Options...
Page 452: Clear Ipv6 Interface
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 interface clear ipv6 interface interfaceType interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters on the specified IPv6 interface. The default is all interface types Description and all interfaces.
Page 453: Clear Ipv6 Mroute
Chapter 4: C Commands clear ipv6 mroute clear ipv6 mroute { * | grpAddress [ sourceAddress ] } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all or the specified IPv6 multicast forwarding entries. There is no no version. Description * Clears all IPv6 multicast forwarding entries Options...
Page 454: Clear Ipv6 Neighbors
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 neighbors clear ipv6 neighbors [ include-statics | statics-only ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all IPv6 dynamic neighbors. The include-statics keyword clears both dynamic Description neighbors and static neighbors.
Page 455: Clear Ipv6 Ospf Counters
Chapter 4: C Commands clear ipv6 ospf counters clear ipv6 ospf [ processId ] counters Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all OSPF IPv6 statistical counters for the virtual router. There is no no version. Description processId Number in the range 1–65535 that identifies the OSPF process Options Privileged Exec...
Page 456: Clear Ipv6 Ospf Process
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 ospf process clear ipv6 ospf [ processId ] process Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the OSPF IPv6 process on the virtual router. There is no no version. Description processId Number in the range 1–65535 that identifies the OSPF process Options...
Page 457: Clear Ipv6 Ospf Redistribution
Chapter 4: C Commands clear ipv6 ospf redistribution clear ipv6 ospf redistribution Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears and readvertise all of the routes that have been previously redistributed into Description OSPF. Exercise caution when using this command as it purges all external LSAs and reoriginates.
Page 458: Clear Ipv6 Pim Interface
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 pim interface clear ipv6 pim interface [ interfaceType interfaceSpecifier ] count Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters for multicast packet statistics on all IPv6 interfaces or the specified Description IPv6 interface.
Page 459: Clear Ipv6 Pim Remote-Neighbor
Chapter 4: C Commands clear ipv6 pim remote-neighbor clear ipv6 pim remote-neighbor [ ipv6Address ] count Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the counters for remote neighbor statistics on all IPv6 interfaces or the specified Description IPv6 interface.
Page 460: Clear Ipv6 Prefix-List
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 prefix-list clear ipv6 prefix-list [ listName [ network/length] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all hit counts in all IPv6 prefix lists, the specified prefix list, or the specified Description entry from the specified prefix list.
Page 461: Clear Ipv6 Routes
Chapter 4: C Commands clear ipv6 routes clear ipv6 routes [ ipv6Prefix | * ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears IPv6 routes. To clear the routes for a specific IPv6 network, specify the IPv6 Description prefix.
Page 462: Clear Ipv6 Tunnel-Routes
JUNOSe 11.1.x Command Reference Guide A to M clear ipv6 tunnel-routes clear ipv6 tunnel-routes [ ipv6Prefix | * ] Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Clears and then refreshes IPv6 routes from the tunnel routing table. To clear the Description routes for a specific IPv6 network, specify the IPv6 prefix.
Page 463: Clear Isis Adjacency
Chapter 4: C Commands clear isis adjacency clear isis adjacency [ systemId | hostname ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all entries from the adjacency database, or clears only adjacencies with a Description specified neighbor. There is no no version. systemID System ID of an IS-IS neighbor Options hostname—Hostname of an IS-IS neighbor...
Page 464: Clear Isis Database
JUNOSe 11.1.x Command Reference Guide A to M clear isis database clear isis database [ systemId | hostname ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all entries from the IS-IS link-state database, or clears only entries associated Description with a specified neighbor.
Page 465: Clear Isis Ipv6 Redistribution
Chapter 4: C Commands clear isis ipv6 redistribution clear isis ipv6 redistribution Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Clears all the IPv6 routes that have previously been redistributed into IS-IS and Description redistributes them using the current policy configuration. There is no no version. Privileged Exec Mode clear isis ipv6 redistribution...
Page 466: Clear L2C Discovery-Table
JUNOSe 11.1.x Command Reference Guide A to M clear l2c discovery-table clear l2c discovery-table { neighbor neighborName | end-user-id userId | Syntax neighbor neighborName end-user-id userId } Command introduced in JUNOSe Release 7.2.0. Release Information Clears all entries or a specified entry from the topology discovery table. There is no Description no version.
Page 467: Clear L2C Neighbor
Chapter 4: C Commands clear l2c neighbor clear l2c neighbor neighborName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Resets the specified GSMP neighbor session. There is no no version. Description neighborName—Name of the neighbor you want to reset Options Privileged Exec Mode...
Page 468: Clear Line
JUNOSe 11.1.x Command Reference Guide A to M clear line clear line { absoluteLine | cliType relativeLine } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes all services on any line on the system and closes any files opened as a Description result of services on that line.
Page 469: Clear Mirror Log
Chapter 4: C Commands clear mirror log clear mirror log Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears all log entries for packet mirroring operations. By default, you must have CLI Description user access level 13 or above to use this command; an administrator can modify the user access level requirement.
Page 470: Clear Mpls Dynamic-Interfaces On-Major-Interfaces
JUNOSe 11.1.x Command Reference Guide A to M clear mpls dynamic-interfaces on-major-interfaces clear mpls dynamic-interfaces [ ip | ipv6 ] on-major-interfaces Syntax [ interfaceType interfaceSpecifier ] Command introduced in JUNOSe Release 7.2.0. Release Information Removes and re-creates both dynamic IPv4 interfaces and dynamic IPv6 interfaces Description that are on top of all MPLS major interfaces or on top of the specified MPLS major interface.
Page 471: Clear Mpls Ldp
Chapter 4: C Commands clear mpls ldp clear mpls ldp [ prefix destAddr [ maskLen | mask ] | neighbor [ neighborAddress ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes and reestablishes existing LDP LSPs, thereby forcing the reapplication of Description policies on the reestablished topology-driven LDP LSPs.
Page 472: Clear Redundancy History
JUNOSe 11.1.x Command Reference Guide A to M clear redundancy history clear redundancy history Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the high availability switchover history for the router. There is no no version. Description Privileged Exec Mode clear redundancy history...
Page 473: Clear Rsvp Authentication
Chapter 4: C Commands clear rsvp authentication clear { ip | mpls } rsvp authentication [ ipAddress ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Clears the security association and resets the sequence number on the receiving peer Description for the specified sending peer.
Page 474: Clear Suspicious-Control-Flow-Detection
JUNOSe 11.1.x Command Reference Guide A to M clear suspicious-control-flow-detection clear suspicious-control-flow-detection Syntax [ interface interfaceSpecifier protocol protocolValue address ethernetAddress slot slotNumber ] Command introduced in JUNOSe Release 7.3.0. Release Information Clears one or more suspicious flows. If you do not specify a slot, interface, or IP Description address, clears all suspicious flows.
Page 475: Client-Name
Chapter 4: C Commands client-name client-name clientname Syntax no client-name Command introduced before JUNOSe Release 7.1.0. Release Information From Domain Map Tunnel Configuration or Tunnel Group Tunnel Configuration Description mode, sets a hostname for a tunnel that the LAC uses when communicating with the LNS about the tunnel.
Page 476: Clns Configuration-Time
JUNOSe 11.1.x Command Reference Guide A to M clns configuration-time clns configuration-time configTime Syntax no clns configuration-time Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the rate at which ES hellos and IS hellos are sent. The no version restores Description the default value, 10 seconds.
Page 477: Clns Holding-Time
Chapter 4: C Commands clns holding-time clns holding-time holdTime Syntax no clns holding-time Command introduced before JUNOSe Release 7.1.0. Release Information Allows the sender of an ES hello or IS hello to specify the length of time you consider Description the information in the hello packets to be valid.
Page 478: Clns Host
JUNOSe 11.1.x Command Reference Guide A to M clns host clns host name nsap Syntax no clns host name Command introduced before JUNOSe Release 7.1.0. Release Information Defines a name-to-NSAP mapping that can then be used with commands requiring Description NSAPs.
Page 479: Clock Set
Chapter 4: C Commands clock set clock set time { month day | day month } year Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to manually set the system clock. There is no no version. Description time Current time (in 24-hour format –...
Page 480: Clock Source
JUNOSe 11.1.x Command Reference Guide A to M clock source clock source { line | internal { module | chassis } } Syntax no clock source Command introduced before JUNOSe Release 7.1.0. Release Information Determines how an interfaces obtains clocking signals. The no version restores the Description default value, line.
Page 481: Clock Summer-Time Date
Chapter 4: C Commands clock summer-time date clock summer-time name date { startDay startMonth | startMonth startDay } Syntax startYear startTime { stopDay stopMonth | stopMonth stopDay } stopYear stopTime [ dstOffset ] no clock summer-time Command introduced before JUNOSe Release 7.1.0. Release Information Sets the router to automatically switch to summer time (Daylight Saving Time DST).
Page 482: Clock Summer-Time Recurring
JUNOSe 11.1.x Command Reference Guide A to M clock summer-time recurring clock summer-time name recurring [ { startWeekNumber | startWeekEnum } Syntax startDay startMonth startTime { stopWeekNumber | stopWeekEnum } stopDay stopMonth stopTime [ dstOffset ] ] no clock summer-time Command introduced before JUNOSe Release 7.1.0.
Page 483: Clock Timezone
Chapter 4: C Commands clock timezone clock timezone name hours [ minutes ] Syntax no clock timezone Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time zone for display. The no version sets the time zone to UTC. Description name Name of the time zone to be displayed when Standard time is in effect, Options...
Page 484: Color
JUNOSe 11.1.x Command Reference Guide A to M color [ no ] [ suspend ] color { green | yellow | red } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a policy rule that assigns a color to packets defined in the current classifier Description control list.
Page 485: Color-Aware
Chapter 4: C Commands color-aware [ no ] color-aware Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Configures rate-limit profile to operate in color-aware mode. (Supported only on Description hierarchical rate limits.) Color-aware rate limits can change the algorithm used depending on the color of the incoming packet, which might have been set in the previous rate limit, in a policy action, or in an earlier policy.
Page 486: Color-Mark-Profile
JUNOSe 11.1.x Command Reference Guide A to M color-mark-profile [ no ] [ ip | ipv6 | mpls ] color-mark-profile profileName Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Translates the packet color (independent of its type) to a type-dependent mark (for Description ToS or EXP), which is applied to a packet after it has exited a rate-limit hierarchy.
Page 487: Committed-Action
Chapter 4: C Commands committed-action For IP and IPv6 rate-limit profiles: Syntax [ no ] committed-action { drop | transmit | mark markVal } For L2TP rate-limit profiles: [ no ] committed-action { drop | transmit } For MPLS rate-limit profiles: [ no ] committed-action { drop | transmit | mark-exp expValue } For hierarchical rate-limit profiles: [ no ] committed-action { drop | transmit [ conditional | unconditional | final ] }...
Page 488: Committed-Burst
JUNOSe 11.1.x Command Reference Guide A to M committed-burst committed-burst { size | millisecond milliseconds } Syntax no committed-burst Command introduced before JUNOSe Release 7.1.0. Release Information milliseconds variable added in JUNOSe Release 8.1.0. Sets the committed burst for a rate limit profile. The no version restores the default Description value, 100 ms;...
Page 489: Committed-Drop-Threshold
Chapter 4: C Commands committed-drop-threshold committed-drop-threshold committedDropThreshold Syntax no committed-drop-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Configures the threshold above which committed-drop-events are logged. The no Description version removes the threshold. committedDropThreshold—Bits per second in the range 0–1073741824 Options Statistics Profile Configuration Mode...
Page 490: Committed-Length
JUNOSe 11.1.x Command Reference Guide A to M committed-length committed-length minimumCommittedLength [ maximumCommittedLength ] Syntax no committed-length Command introduced before JUNOSe Release 7.1.0. Release Information Sets minimum and maximum constraints for the queue's committed lengths. The Description no version removes constraints on the queue's committed length. minimumCommittedLength Range 0–1073741824 Options maximumCommittedLength Range 0–1073741824...
Page 491: Committed-Rate
Chapter 4: C Commands committed-rate committed-rate { rate | parameterName percentage percentValue } Syntax no committed-rate Command introduced before JUNOSe Release 7.1.0. Release Information parameterName and percentValue variables added in JUNOSe Release 8.1.0. Sets the committed rate for a rate-limit profile as a specified value or as a percentage Description of a reference rate defined in the specified policy parameter.
Page 492: Committed-Threshold
JUNOSe 11.1.x Command Reference Guide A to M committed-threshold committed-threshold { percent MinThresholdPercent MaxThresholdPercent | Syntax MinThresholdBytes MaxThresholdBytes } MaxDropProbability no committed-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the committed queue thresholds and maximum drop probability. The no Description version removes committed threshold.
Page 493: Common-Name
Chapter 4: C Commands common-name [ no ] common-name commonName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a common name used to generate certificate requests. The no version Description removes the common name. commonName Name of up to 60 characters Options IPSec Identity Configuration Mode...
Page 494: Configure
JUNOSe 11.1.x Command Reference Guide A to M configure configure [ terminal | file [ fileName ] [ verbose | show-progress [ dotPeriod ] ] ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enters Global Configuration mode. There is no no version. Description NOTE: This command is not allowed for a short time after a warm restart (warm switchover) occurs.
Page 495: Confirmations Explicit
Chapter 4: C Commands confirmations explicit [ no ] confirmations explicit Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Requires the user to enter y, ye, or yes to confirm a prompt, and to enter n or no to Description deny a prompt.
Page 496: Conformed-Action
JUNOSe 11.1.x Command Reference Guide A to M conformed-action For IP and IPv6 rate-limit profiles: Syntax [ no ] conformed-action { drop | transmit | mark markVal } For L2TP rate-limit profiles: [ no ] conformed-action { drop | transmit } For MPLS rate-limit profiles: [ no ] conformed-action { drop | transmit | mark-exp expValue } For hierarchical rate-limit profiles:...
Page 497: Conformed-Drop-Threshold
Chapter 4: C Commands conformed-drop-threshold conformed-drop-threshold conformedDropThreshold Syntax no conformed-drop-threshold Command introduced before JUNOSe Release 7.1.0. Release Information conditional, unconditional, and final keywords added in JUNOSe Release 7.2.0. Configures the threshold above which conformed-drop-events are logged. The no Description version removes the threshold. conformedDropThreshold—Bits per second in the range 0–1073741824 Options Statistics Profile Configuration...
Page 498: Conformed-Fraction
JUNOSe 11.1.x Command Reference Guide A to M conformed-fraction conformed-fraction conformedFraction Syntax no conformed-fraction Command introduced before JUNOSe Release 7.1.0. Release Information Sets the percentage of the total queue that can be occupied before dropping Description conformed packets. The no version returns the conformed fraction to its default setting.
Page 499: Conformed-Length
Chapter 4: C Commands conformed-length conformed-length minimumConformedLength [ maximumConformedLength ] Syntax no conformed-length Command introduced before JUNOSe Release 7.1.0. Release Information Sets minimum and maximum constraints for the queue's conformed lengths. The Description no version removes constraints on the queue's conformed length. minimumConformedLength Number in the range 0–1073741824 Options maximumConformedLength Number in the range 0–1073741824...
Page 500: Conformed-Threshold
JUNOSe 11.1.x Command Reference Guide A to M conformed-threshold conformed-threshold { percent MinThresholdPercent MaxThresholdPercent | Syntax MinThresholdBytes MaxThresholdBytes } MaxDropProbability no conformed-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the conformed queue thresholds and maximum drop probability. The no Description version removes conformed threshold.
Page 501: Control-Plane
Chapter 4: C Commands control-plane control-plane Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Enters Control Plane Configuration mode. There is no no version. Description Global Configuration Mode Rate-Limiting Traffic Flows Related Topics control-plane...
Page 502: Controlled-Interface-Type
JUNOSe 11.1.x Command Reference Guide A to M controlled-interface-type controlled-interface-type { controlledInterfaceType | set | superset } Syntax no controlled-interface-type { controlledInterfaceType | all } Command introduced in JUNOSe Release 7.1.0. Release Information set and superset keywords added in JUNOSe Release 9.2.0. Assigns controlled-interface types to a QoS parameter definition.
Page 503: Controller E3
Chapter 4: C Commands controller e3 controller e3 interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Accesses Controller Configuration mode so that you can configure an E3 controller. Description There is no no version. interfaceSpecifier—Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 Global Configuration...
Page 504: Controller Sonet
JUNOSe 11.1.x Command Reference Guide A to M controller sonet controller sonet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Selects an interface on which you want to configure SONET or SDH. There is no no Description version. interfaceSpecifier—Particular interface;...
Page 505: Controller T3
Chapter 4: C Commands controller t3 controller t3 interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Accesses Controller Configuration mode so that you can configure a T3 controller. Description There is no no version. interfaceSpecifier—Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 Global Configuration...
Page 506: Convergence-Factor
JUNOSe 11.1.x Command Reference Guide A to M convergence-factor convergence-factor convergenceFactor Syntax no convergence-factor Command introduced in JUNOSe Release 8.0.0. Release Information Specifies the convergence factor for all simple shared shapers on the router. The Description convergence factor determines how quickly the dynamic shaping rate converges with the calculated dynamic shaping rate, and is expressed as a percentage of the available bandwidth.
Page 507: Copy
Chapter 4: C Commands copy copy [ sourcePath ]sourceFilename [ destinationPath ]destinationFilename [ force ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information hostName and deviceName variables added in JUNOSe Release 7.2.0. Copies a local or network file. There is no no version. Description NOTE: You cannot change the extension of a file, for example, from .mac to .scr.
Page 508 JUNOSe 11.1.x Command Reference Guide A to M networkPath Path to the network host incoming Specifies the incoming router's FTP directory subdirectory Name of a subdirectory on the ERX router's FTP server. If the subdirectory does not exist, the router creates it. outgoing Specifies the router's outgoing FTP directory destinationFilename Name of the destination file force Forces a copy, even when the destination file already exists;...
Page 509: Copy Running-Configuration
NOTE: A Perl script is provided in the Tools folder of the compressed software image bundle, which you downloaded from the Juniper Networks website, that enables you to view the text configuration in a configuration file that contains both binary and text configuration.
Page 510: Copy Running-Configuration Startup-Configuration
JUNOSe 11.1.x Command Reference Guide A to M copy running-configuration startup-configuration copy running-configuration startup-configuration Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Saves all outstanding (unsaved) configuration changes to nonvolatile storage; an Description exact alias of the write memory command. Available if the router is in either Automatic Commit mode or Manual Commit mode.
Page 511: Copy Startup-Configuration
Chapter 4: C Commands copy startup-configuration copy startup-configuration destination [ force ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Copies the previously saved startup configuration to a local or remote (network) Description router configuration (*.cnf) file. Available only if the router is in Manual Commit mode.
Page 512: Cost
JUNOSe 11.1.x Command Reference Guide A to M cost cost intfCost Syntax no cost Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a cost metric for an OSPF remote-neighbor interface. Used in the calculation Description of the SPF routing table. The no version restores the default value. intfCost Link-state metric cost;...
Page 513: Country
Chapter 4: C Commands country [ no ] country countryCode Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a country name used to generate certificate requests. The no version Description removes the country name. countryCode Two-character country name Options IPSec Identity Configuration Mode...
Page 514: Crc
JUNOSe 11.1.x Command Reference Guide A to M crc { 16 | 32 | none } Syntax no crc Command introduced before JUNOSe Release 7.1.0. Release Information Sets the size of the cyclic redundancy check. CRC is an error-checking technique that Description uses a calculated numeric value to detect errors in transmitted data.
Page 515: Crl
Chapter 4: C Commands crl { ignored | optional | required } Syntax no crl Command introduced before JUNOSe Release 7.1.0. Release Information Controls how the router checks certificate revocation lists (CRLs) when determining Description whether to accept a peer's certificates. The no version restores the default setting. ignored Specifies that the router will not try to find or use CRLs Options optional Specifies that the router will try to find a CRL.
Page 516: Crypto Key Dss
JUNOSe 11.1.x Command Reference Guide A to M crypto key dss crypto key { generate | zeroize } dss Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Controls SSH server daemon and creation/deletion of SSH server host key. This Description command is not displayed by the show config command.
Page 517: Chapter 5 D Commands
Chapter 5 D Commands...
Page 518: Data-Character-Bits
JUNOSe 11.1.x Command Reference Guide A to M data-character-bits data-character bits { 7 | 8 } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of data bits available for characters for all sessions on the specified Description vty lines.
Page 519: Dead-Interval
Chapter 5: D Commands dead-interval dead-interval deadInterval Syntax no dead-interval Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time period that the OSPF router waits without seeing hello packets from a Description remote neighbor before declaring the neighbor to be down. The no version restores the default value.
Page 520: Deadtime
JUNOSe 11.1.x Command Reference Guide A to M deadtime deadtime recovery Syntax no deadtime Command introduced before JUNOSe Release 7.1.0. Release Information Configures the amount of time, in minutes, that a server is marked as unavailable if Description a request times out for the configured retry count. If a server fails to answer a request, it is marked “...
Page 521: Debounce
Chapter 5: D Commands debounce debounce [ seconds ] Syntax no debounce Command introduced in JUNOSe Release 9.3.0. Release Information Enables the debounce timer and sets the time interval that the interface waits before Description reporting a state change to the upper-layer protocols. The no version restores the default behavior, disabling debounce on the interface.
Page 522: Debounce-Interval
JUNOSe 11.1.x Command Reference Guide A to M debounce-interval debounce-interval seconds Syntax no debounce-interval Command introduced in JUNOSe Release 9.3.0. Release Information Modifies the minimum time an Ethernet interface must maintain a given state for Description example, up or down before the interface notifies the upper-layer protocols of the state change.
Page 523: Debounce-Time
Chapter 5: D Commands debounce-time debounce-time interval Syntax no debounce-time Command introduced before JUNOSe Release 7.1.0. Release Information Sets the interval to wait before bringing up a RIP interface that was brought down. Description The no version restores the default value, 10. interval Seconds in the range 0–60 Options Address Family Configuration, Router Configuration...
Page 524: Debug Ip Bgp
JUNOSe 11.1.x Command Reference Guide A to M debug ip bgp debug ip bgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ] Syntax [ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ] [ route-map mapName ] [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] [ secondary ] no debug ip bgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]...
Page 525 Chapter 5: D Commands error or 3 Error condition warning or 4 Warning condition notice or 5 Normal but significant condition info or 6 Informational message debug or 7 Debug message verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail...
Page 526: Debug Ip Mbgp
JUNOSe 11.1.x Command Reference Guide A to M debug ip mbgp debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ] Syntax [ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ] [ route-map mapName ] [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] [ secondary ] no debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ]...
Page 527 Chapter 5: D Commands error or 3 Error condition warning or 4 Warning condition notice or 5 Normal but significant condition info or 6 Informational message debug or 7 Debug message verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail...
Page 528: Debug Ip Ospf
JUNOSe 11.1.x Command Reference Guide A to M debug ip ospf debug ip ospf ospfLog [ severity { severityValue | severityNumber } ] Syntax [ verbosity verbosityLevel ] no debug ip ospf ospfLog Command introduced before JUNOSe Release 7.1.0. Release Information Shows information about the selected variable.
Page 529 Chapter 5: D Commands info or 6 Informational message debug or 7 Debug message verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail high Verbose Privileged Exec Mode debug ip ospf...
Page 530: Debug Ip Pim
JUNOSe 11.1.x Command Reference Guide A to M debug ip pim The syntax differs for PIM Dense Mode and PIM Sparse Mode. Syntax PIM Dense Mode: debug ip pim { pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] | switchState groupAddress sourceAddress | dense-mode { on | off } } PIM Sparse Mode: debug ip pim { pimLog [ severity { severityValue | severityNumber } ]...
Page 531 Chapter 5: D Commands warning or 4 Warning condition notice or 5 Normal but significant condition info or 6 Informational message debug or 7 Debug message verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail high Verbose switchState Switches from one type of tree to another...
Page 532: Debug Ip Rip
JUNOSe 11.1.x Command Reference Guide A to M debug ip rip debug ip rip ripLog [ severity { severityValue | severityNumber } ] Syntax [ verbosity verbosityLevel ] no debug ip rip ripLog Command introduced before JUNOSe Release 7.1.0. Release Information Shows information about the selected variable.
Page 533: Debug Ipv6 Ospf
Chapter 5: D Commands debug ipv6 ospf debug ipv6 ospf ospfLog [ severity { severityValue | severityNumber } ] Syntax [ verbosity verbosityLevel ] no debug ipv6 ospf ospfLog Command introduced before JUNOSe Release 7.1.0. Release Information Shows information about the selected variable. The no version disables the display. Description ospfLog OSPF log of interest;...
Page 534 JUNOSe 11.1.x Command Reference Guide A to M info or 6 Informational message debug or 7 Debug message verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail high Verbose Privileged Exec Mode debug ipv6 ospf...
Page 535: Debug Ipv6 Pim
Chapter 5: D Commands debug ipv6 pim debug ipv6 pim Syntax { pimLog [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ] | switchState groupAddress sourceAddress | dense-mode { on | off } | sparse-mode { on | off | sg-state [ group groupAddress [ source sourceAddress ] | rp rpAddress ] [ count ] } } no debug ipv6 pim pimLog Command introduced before JUNOSe Release 7.1.0.
Page 536 JUNOSe 11.1.x Command Reference Guide A to M verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail high Verbose switchState Switches from one type of tree to another rpt-switch Switch from a shortest-path tree to a shared path tree spt-switch Switch from a shared-path tree to a shortest path tree groupAddress IPv6 address of the multicast group sourceAddress IPv6 address of the multicast source...
Page 537: Debug Isis
Chapter 5: D Commands debug isis debug isis isisLog [ severity { severityValue | severityNumber } ] Syntax [ verbosity verbosityLevel ] no debug isis isisLog Command introduced before JUNOSe Release 7.1.0. Release Information Displays debug-related information about selected IS-IS log parameters. This command Description manipulates the same log as the Global Configuration log commands.
Page 538 JUNOSe 11.1.x Command Reference Guide A to M verbosityLevel Verbosity of the log category's messages; can be any of the following: low Terse medium Moderate detail high Verbose Privileged Exec Mode debug isis...
Page 539: Default-Fields Peer
Chapter 5: D Commands default-fields peer [ no ] default-fields peer fieldOptions Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the fields that will appear by default in the output of subsequently issued Description show ip bgp summary and show bgp ipv6 summary commands. The no version removes the fields from the output.
Page 540 JUNOSe 11.1.x Command Reference Guide A to M updates-sent Number of update messages sent to the peer * Indicates that one or more parameters can be repeated multiple times in a list in the command line Router Configuration Mode default-fields peer...
Page 541: Default-Fields Route
Chapter 5: D Commands default-fields route [ no ] default-fields route fieldOptions Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the fields that will appear by default in the output of any subsequently Description issued show ip bgp or show bgp ipv6 command that displays routes (except for the show ip bgp summary or show bgp ipv6 summary commands).
Page 542 JUNOSe 11.1.x Command Reference Guide A to M out-label MPLS label for the route; the label with outgoing MPLS frames peer IP address of BGP peer from which route was learned peer-type Type of BGP peer: internal, external, or confederation origin Origin of the route originator-id Router ID of the router in the local AS that originated the route rd Route distinguisher...
Page 543: Default-Information Originate
Chapter 5: D Commands default-information originate For BGP: Syntax default-information originate [ route-map mapTag ] no default-information originate [ route-map [ mapTag ] ] For IS-IS: [ no ] default-information originate [ route-map mapTag ] For RIP: [ no ] default-information originate [ route-map mapTag ] default-information originate always For OSPF: [ no ] default-information originate [ always | metric metricValue | metric-type 1 |...
Page 544 JUNOSe 11.1.x Command Reference Guide A to M metric-type 2 Sets the default route's metric type to OSPF external type 2 * Indicates that one or more parameters can be repeated multiple times in a list in the command line Address Family Configuration, Router Configuration Mode default-information originate...
Page 545: Default-Metric
Chapter 5: D Commands default-metric [ no ] default-metric metricValue [ interfaceType interfaceSpecifier ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures RIP to use this metric on redistributed routes on all subsequently created Description interfaces. The no version restores the default value, 0. metricValue Metric to apply to routes;...
Page 546: Default-Router
JUNOSe 11.1.x Command Reference Guide A to M default-router default-router ipAddressPrimary [ ipAddressSecondary ] Syntax no default-router Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of the router that the subscriber's computer will use for traffic Description destined for locations beyond the local subnet.
Page 547: Default-Upper-Type Mlppp
Chapter 5: D Commands default-upper-type mlppp default-upper-type mlppp Syntax no default-upper-type Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that L2TP creates an MLPPP interface for the current LNS session when full Description LCP proxy data is not available. The no version deletes the MLPPP specification. L2TP Destination Profile Host Configuration Mode default-upper-type mlppp...
Page 548: Delete
JUNOSe 11.1.x Command Reference Guide A to M delete delete { filename | directory directoryName[:fileName ] } [ force ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information fileName variable added for directory keyword in JUNOSe Release 9.1.0. Deletes a directory or file in nonvolatile storage. There is no no version. Description NOTE: For detailed information on file type usage with the delete command, see Deleting Files in the JUNOSe System Basics Configuration Guide.
Page 549: Delta-Sampling
Chapter 5: D Commands delta-sampling delta-sampling [ discontinuity-id mibId Syntax | discontinuity-id-type { timeStamp | timeTicks } ] no delta-sampling [ discontinuity-id ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies delta sampling for the trigger you are configuring. The no version returns Description the trigger to the default sampling method absolute-value sampling.
Page 550: Deny
JUNOSe 11.1.x Command Reference Guide A to M deny [ no ] deny domainName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the domain name(s) that are to be denied access to AAA authentication. Description The no version negates the command. domainName—Name of the domain;...
Page 551: Description
Chapter 5: D Commands description description name Syntax no description Command introduced before JUNOSe Release 7.1.0. Release Information In Controller Configuration mode, assigns a text description or an alias to a CT3, E3, Description T3, or SONET/SDH interface. Use the show controllers e3, show controllers sonet, show controllers t1, or mpls rsvp disable command to display the description.
Page 552: Dhcp Delete-Binding
JUNOSe 11.1.x Command Reference Guide A to M dhcp delete-binding To delete the DHCP client with the specified binding ID: Syntax dhcp delete-binding bindingId To delete all DHCP client bindings or all DHCP client bindings of a particular type on the specified subnet: dhcp delete-binding { all | all-local | all-external | all-relay-proxy } [ subnetAddress ] To delete DHCP client bindings of a particular type on the specified subnet:...
Page 553 Chapter 5: D Commands bindingId DHCP binding ID for a specific client Options all Specifies all DHCP local server, DHCP external server, and DHCP relay proxy client bindings all-local Specifies all DHCP local server client bindings all-external Specifies all DHCP external server client bindings all-relay-proxy Specifies all DHCP relay proxy client bindings local Specifies DHCP local server client bindings that meet the deletion criteria external Specifies DHCP external server client bindings that meet the deletion...
Page 554 JUNOSe 11.1.x Command Reference Guide A to M Numerals enclosed by underscores can be preceded or followed by any of the characters listed above | Matches characters on either side of the metacharacter; logical OR You must specify the interface string as a regular expression without spaces; for example, fastEthernet1.1/100 or fastEthernet.*100 The following rules apply for representing nonprintable character sequences in the circuit ID string or the remote ID string:...
Page 555: Dhcp-External Delete-Binding
Chapter 5: D Commands dhcp-external delete-binding dhcp-external delete-binding [ binding-id bindingId | all ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Deletes a specific client binding or all bindings from the virtual router's DHCP binding Description table. There is no no version. NOTE: This command is deprecated and might be removed completely in a future release.
Page 556: Dhcp-External Duplicate-Mac-Address
JUNOSe 11.1.x Command Reference Guide A to M dhcp-external duplicate-mac-address [ no ] dhcp-external duplicate-mac-address Syntax Command introduced in JUNOSe Release 9.3.0. Release Information Configures the DHCP external server application to use a combination of the MAC Description address and the gateway IP address (giaddr) to uniquely identify DHCP clients attached to the router.
Page 557: Dhcpv6 Delete-Binding
Chapter 5: D Commands dhcpv6 delete-binding dhcpv6 delete-binding { all | ipv6Prefix | string } Syntax Command introduced in JUNOSe Release 11.0.0. Release Information Deletes the specified DHCPv6 client bindings. There is no no version. Description all Specifies all DHCPv6 client bindings. Options ipv6Prefix IPv6 prefix (address and subnetwork mask) of the DHCPv6 clients;...
Page 558: Diag
JUNOSe 11.1.x Command Reference Guide A to M diag diag slotNumber [ subsystem ] [ force ] Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Reboots the SRP module or line module in the specified slot on all E Series routers Description and performs diagnostic tests.
Page 559: Diag-Level
Chapter 5: D Commands diag-level diag-level [ normal ] [ bypass ] Syntax Command introduced in JUNOSe Release 9.2.0. Release Information Sets the diagnostics level on the active or standby SRP module to reduce boot time Description during a cold and a warm boot. The default diagnostics level is normal. There is no no version.
Page 560: Dir
JUNOSe 11.1.x Command Reference Guide A to M dir [ word ] [ short ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays information about the files in nonvolatile storage, including name, size, date Description created, and whether they are in use. There is no no version. NOTE: When high availability is enabled on the router, it is possible that files or file attributes may appear to be unsynchronized when they are not.
Page 561: Disable
1 and 0 10 Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service 15 Allows the user to execute support commands Address Family Configuration (RIP), Interface Configuration (DVMRP only), Privileged...
Page 562: Disable-Autosync
JUNOSe 11.1.x Command Reference Guide A to M disable-autosync [ no ] disable-autosync Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Halts automatic synchronization between the primary and standby SRP modules. Description When high availability is enabled (that is, the high availability state is initializing, active, or pending) this command affects only changes to nonconfiguration files.
Page 563: Disable-Dynamic-Redistribute
Chapter 5: D Commands disable-dynamic-redistribute [ no ] disable-dynamic-redistribute Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Halts the dynamic redistribution of routes that are initiated by changes to a route Description map. Supported by DVMRP, BGP, IS-IS, OSPF, and RIP. The no version reenables dynamic redistribution of routes.
Page 564: Disable-Incremental-External-Spf
JUNOSe 11.1.x Command Reference Guide A to M disable-incremental-external-spf [ no ] disable-incremental-external-spf Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables incremental external SPF on the router; results in a full SPF when an event Description occurs to trigger an external SPF. The no version reenables incremental external SPF.
Page 565: Disable Proxy Lcp
Chapter 5: D Commands disable proxy lcp [ no ] disable proxy lcp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables the proxy LCP parameter for the remote host. The no version enables the Description proxy LCP parameter for the remote host. L2TP Destination Profile Host Configuration Mode disable proxy lcp...
Page 566: Disable-Switch-On-Error
JUNOSe 11.1.x Command Reference Guide A to M disable-switch-on-error [ no ] disable-switch-on-error Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Prevents the redundant SRP module from taking over if the primary SRP module Description experiences a software failure or if you push the reset button on the primary SRP module.
Page 567: Disconnect-Cause
Chapter 5: D Commands disconnect-cause [ no ] disconnect-cause Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables an E Series LNS to generate, for the L2TP session to which the L2TP host Description profile applies, a PPP Disconnect Cause Code attribute value pair (AVP) and include it in all L2TP Call-Disconnect-Notify (CDN) messages that it sends to an LAC.
Page 568: Disconnect Ssh
JUNOSe 11.1.x Command Reference Guide A to M disconnect ssh disconnect ssh { vty vtyId | sessionId } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Terminates an active SSH session. Use the show ip ssh command to determine the Description session identifier for the session to terminate.
Page 569: Discovery-Mode
Chapter 5: D Commands discovery-mode [ no ] discovery-mode Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Enables ANCP discovery mode. This mode allows RADIUS software to obtain loop Description parameter information from a connected access node. If discovery mode is disabled, it does not accept topology discovery messages and stops advertising topology discovery capability.
Page 570: Distance
JUNOSe 11.1.x Command Reference Guide A to M distance The options available vary depending on your routing protocol context; that is, on Syntax whether you are configuring OSPF or RIP. For OSPF: [ no ] distance { ospfWeight | ospf { external distExt | inter-area disInter | intra-area disIntra } [ external distExt | inter-area distInter | intra-area distIntra ]* } For RIP: [ no ] distance ripWeight...
Page 571: Distance Bgp
Chapter 5: D Commands distance bgp distance bgp externalDistance internalDistance localDistance Syntax no distance bgp [ externalDistance [ internalDistance [ localDistance ] ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets the administrative distances for BGP routes. A distance of 255 prevents the route Description from being installed in the routing table.
Page 572: Distance Ip
JUNOSe 11.1.x Command Reference Guide A to M distance ip [ no ] distance weight ip Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the administrative distance for IS-IS routes that are inserted into the IP routing Description table.
Page 573: Distribute-Domain-Wide
Chapter 5: D Commands distribute-domain-wide [ no ] distribute-domain-wide Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Increases the granularity of routing information within an IS-IS domain by allowing Description routes to be distributed from level 2 to level 1. This results in more accurate routing between level 1 areas.
Page 574: Distribute-List
JUNOSe 11.1.x Command Reference Guide A to M distribute-list In Router Configuration mode: Syntax [ no ] distribute-list accessListName { in | out } [ interfaceType interfaceSpecifier ] In Remote Neighbor Configuration mode: [ no ] distribute-list accessListName { in | out } Command introduced before JUNOSe Release 7.1.0.
Page 575: Dns-Domain-Search
Chapter 5: D Commands dns-domain-search [ no ] dns-domain-search domainName Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Specifies a list of domain names in the IPv6 local address pool to be returned to Description clients in DHCPv6 responses as part of the Domain Search List option. The no version removes the configured domain name.
Page 576: Dns-Server
JUNOSe 11.1.x Command Reference Guide A to M dns-server dns-server ipAddressPrimary [ ipAddressSecondary ] Syntax no dns-server Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a DNS server to an address pool. The no version removes the association Description between the address pool and the DNS server.
Page 577: Dns-Server (For Ipv6)
Chapter 5: D Commands dns-server (for IPv6) dns-server ipv6AddressPrimary [ ipv6AddressSecondary ] Syntax no dns-server Command introduced in JUNOSe Release 10.1.0. Release Information Configures the primary and secondary IPv6 DNS server addresses in the IPv6 local Description address pool. The DNS server addresses are returned to the client in DHCPv6 responses as part of the DNS Recursive Name Server option.
Page 578 JUNOSe 11.1.x Command Reference Guide A to M do execCommand Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows you to issue an Exec mode command from any configuration command Description mode. This command functions the same as the run command. There is no no version.
Page 579: Domain
Chapter 5: D Commands domain domain domainName Syntax no domain Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the domain to an automatically generated username in an IP service profile. Description The no version removes the domain. domainName —Name of the domain; maximum of 32 characters Options IP Service Profile Configuration Mode...
Page 580: Domain-Authentication
JUNOSe 11.1.x Command Reference Guide A to M domain-authentication [ no ] domain-authentication { csnp | psnp } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables simple text authentication or HMAC MD5 authentication of IS-IS Description level 2 CSNP packets or PSNP packets.
Page 581: Domain-Authentication-Key
Chapter 5: D Commands domain-authentication-key domain-authentication-key [ 0 | 8 ] authKey Syntax no domain-authentication-key Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a password for authentication of IS-IS level 2 LSPs, CSNPs, and PSNPs. The Description no version deletes the password. NOTE: Issuing this command enables simple authentication of level 2 LSPs only.
Page 582: Domain-Id
JUNOSe 11.1.x Command Reference Guide A to M domain-id domain-id domainIdAddress | domainId Syntax no domain-id Command introduced before JUNOSe Release 7.1.0. Release Information Sets the OSPF domain ID for an OSPF VRF on a PE. The no version restores the Description default value.
Page 583: Domain-Message-Digest-Key
Chapter 5: D Commands domain-message-digest-key domain-message-digest-key keyId hmac-md5 [ 0 | 8 ] key Syntax [ start-accept startAcceptTime [ { startAcceptMonth startAcceptDay | startAcceptDay startAcceptMonth } startAcceptYear ] ] [ start-generate startGenTime [ { startGenMonth startGenDay | startGenDay startGenMonth } startGenYear ] ] [ stop-accept { never | stopAcceptTime [ { stopAcceptMonth stopAcceptDay | stopAcceptDay stopAcceptMonth } stopAcceptYear ] } ] [ stop-generate { never | stopGenTime [ { stopGenMonth stopGenDay | stopGenDay...
Page 584 JUNOSe 11.1.x Command Reference Guide A to M never—Specifies that the router never stops accepting or generating packets; overrides previously specified stop times. stopAcceptTime, stopAcceptMonth, stopAcceptDay, stopAcceptYear—Time, month, day, year that the router will stop accepting packets created with this password. Use military time format HH : MM[ : SS ].
Page 585: Domain-Name
Chapter 5: D Commands domain-name From DHCP Local Pool Configuration mode: Syntax domain-name domainName no domain-name From IPSec Identity Configuration mode: [ no ] domain-name domainName Command introduced before JUNOSe Release 7.1.0. Release Information From DHCP Local Pool Configuration mode, specifies a domain name that can be Description returned to the subscriber of an address pool if requested.
Page 586: Domain-Suffix
JUNOSe 11.1.x Command Reference Guide A to M domain-suffix domain-suffix domainSuffix Syntax no domain-suffix Command introduced in JUNOSe Release 7.3.0. Release Information Appends a domain suffix to user-provided usernames on this profile. The no version Description restores the default value, no domain suffix, and usernames are passed transparently to AAA.
Page 587: Domain-Tag
Chapter 5: D Commands domain-tag domain-tag routeTag Syntax no domain-tag Command introduced before JUNOSe Release 7.1.0. Release Information Sets the VPN route tag for an OSPF VRF on a PE to prevent routing loops back into Description the VPN. The no version restores the default value. routeTag Number identifying the VPN route tag in the range 0–4294967295 Options Router Configuration...
Page 588: Dont-Install-Routes
JUNOSe 11.1.x Command Reference Guide A to M dont-install-routes [ no ] dont-install-routes Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Prevents OSPF routes that point directly to the OSPF remote neighbor from being Description installed in the IP routing table of the VR or VRF in which OSPF is running. The no version restores the default behavior, which installs the routes in the IP routing table.
Page 589: Dos-Protection-Group
Chapter 5: D Commands dos-protection-group [ no ] dos-protection-group groupName Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Creates a denial of service (DoS) protection group and enters DoS Protection Group Description Configuration mode. The no version removes the DoS protection group. groupName Name of the DoS protection group;...
Page 590: Drop-Profile
JUNOSe 11.1.x Command Reference Guide A to M drop-profile [ no ] drop-profile dropProfileName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates a drop profile. The no version removes the drop profile. Description dropProfileName Name for the drop profile Options Global Configuration Mode...
Page 591: Ds3-Scramble
Chapter 5: D Commands ds3-scramble [ no ] ds3-scramble Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables scrambling of the ATM cell payload on a T3 interface. DS3 scrambling assists Description clock recovery on the receiving end of the interface. The no version disables cell scrambling.
Page 592: Dsr-Detect
JUNOSe 11.1.x Command Reference Guide A to M dsr-detect [ no ] dsr-detect Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Requires that a DSR signal be detected on the line for a user to log into the console. Description DSR is carried on pin 6 of the SRP module's RS-232 (DB-9) connector.
Page 593: Dsu Bandwidth
Chapter 5: D Commands dsu bandwidth dsu bandwidth bandwidthValue Syntax no dsu bandwidth Command introduced before JUNOSe Release 7.1.0. Release Information Sets the speed for the fractional T3 lines. The no version clears the bandwidth. If Description you issue this command, be sure to issue the dsu mode and scramblecommands. Similarly, if you issue the no version, be sure to issue the no versions of the dsu mode and scramble commands;...
Page 594: Dsu Mode
JUNOSe 11.1.x Command Reference Guide A to M dsu mode dsu mode { 0 | 2 } Syntax no dsu mode Command introduced before JUNOSe Release 7.1.0. Release Information Sets the DSU mode for the lines. The no version clears the dsu mode. If you issue Description this command, be sure to issue the dsu bandwidth and scramble commands.
Page 595: Duplex
Chapter 5: D Commands duplex duplex duplexMode Syntax no duplex Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the duplex mode for an Ethernet interface. This command works with the Description speed command; if you set or accept the automatically negotiate setting for either duplex mode or speed, the router negotiates both parameters with the remote device.
Page 596: Dvmrp Destination Profile
JUNOSe 11.1.x Command Reference Guide A to M dvmrp destination profile dvmrp destination profile profileName { [ any-virtual-router ] | Syntax [ virtual-router virtualRouterName ] } no dvmrp destination profile profileName Command introduced in JUNOSe Release 8.2.0. Release Information Configures a destination profile for dynamic DVMRP tunnels and enters IP Tunnel Description Destination Profile Configuration mode.
Page 597: Chapter 6 E Commands
Chapter 6 E Commands...
Page 598: E3-Scramble
JUNOSe 11.1.x Command Reference Guide A to M e3-scramble [ no ] e3-scramble Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables scrambling of the ATM cell payload on an E3 interface. E3 scrambling assists Description clock recovery on the receiving end of the interface. The no version disables scrambling.
Page 599: Enable
1 and 0 10 Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service, or the ability to assign privileges to commands 15 Allows the user to execute support commands and assign privileges to...
Page 600: Enabled
JUNOSe 11.1.x Command Reference Guide A to M enabled [ no ] enabled Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Enables the aggregation cache to start accumulating information from the flow cache. Description The no version stops the information flow from the flow cache. Flow Cache Configuration Mode enabled...
Page 601: Enable Ipsec-Transport
Chapter 6: E Commands enable ipsec-transport [ no ] enable ipsec-transport Syntax Command introduced before JUNOSe Release 7.1.0. Release Information IP Tunnel Destination Profile Configuration mode added in JUNOSe Release 8.2.0. In IP Tunnel Destination Profile Configuration mode, specifies that the router accepts Description only dynamic IP tunnels protected by an IPSec transport connection.
Page 602: Enable Password
1 and 0; this is the default level 10 Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service 15 Allows the user to execute privilege setting and support commands passwordType: 0 Specifies that an unencrypted password follows;...
Page 603: Enable Proxy Authenticate
Chapter 6: E Commands enable proxy authenticate [ no ] enable proxy authenticate Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures proxy authenticate for a remote host. The no version removes proxy Description authenticate configuration from the remote host. L2TP Destination Profile Host Configuration Mode enable proxy authenticate...
Page 604: Enable Secret
1 and 0; this is the default level 10 Allows the user to execute all commands except support commands, which may be provided by Juniper Networks Customer Service 15 Allows the user to execute support commands secretType One of the following: 0 Indicates that the secret is unencrypted;...
Page 605: Encapsulation
Chapter 6: E Commands encapsulation encapsulation encapsulationType Syntax no encapsulation Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, configures the encapsulation method on an ATM Description PVC.
Page 606: Encapsulation Bridge1483
JUNOSe 11.1.x Command Reference Guide A to M encapsulation bridge1483 encapsulation bridge1483 [ mac-address macAddress ] Syntax no encapsulation bridge1483 Command introduced before JUNOSe Release 7.1.0. Release Information Configures bridged Ethernet as the encapsulation method on an interface and Description optionally assigns a MAC address to the interface.
Page 607: Encapsulation Frame-Relay Ietf
Chapter 6: E Commands encapsulation frame-relay ietf encapsulation frame-relay ietf Syntax no encapsulation frame-relay Command introduced before JUNOSe Release 7.1.0. Release Information Enables Frame Relay encapsulation. The no version removes Frame Relay Description configuration from an interface. Interface Configuration Mode Configuring Frame Relay Layer 2 Services in the JUNOSe BGP and MPLS Related Topics Configuration Guide...
Page 608: Encapsulation Hdlc
JUNOSe 11.1.x Command Reference Guide A to M encapsulation hdlc [ no ] encapsulation hdlc Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables Cisco HDLC encapsulation. The no version disables Cisco HDLC on an Description interface. Interface Configuration, Subinterface Configuration Mode encapsulation hdlc...
Page 609: Encapsulation Mlframe-Relay Ietf
Chapter 6: E Commands encapsulation mlframe-relay ietf encapsulation mlframe-relay ietf Syntax no encapsulation mlframe-relay Command introduced before JUNOSe Release 7.1.0. Release Information Enables Multilink Frame Relay encapsulation. The no version removes Multilink Description Frame Relay configuration from an interface. Interface Configuration Mode encapsulation mlframe-relay ietf...
Page 610: Encapsulation Mlppp
JUNOSe 11.1.x Command Reference Guide A to M encapsulation mlppp [ no ] encapsulation mlppp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures MLPPP as the encapsulation method on an individual interface. Creates Description an MLPPP link interface, which can be configured as a member of an MLPPP bundle. The no version disables MLPPP on an interface.
Page 611: Encapsulation Ppp
Chapter 6: E Commands encapsulation ppp [ no ] encapsulation ppp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures PPP as the encapsulation method for the interface. The no version disables Description PPP on an interface. Interface Configuration, Subinterface Configuration Mode encapsulation ppp...
Page 612: Encapsulation Pppoe
JUNOSe 11.1.x Command Reference Guide A to M encapsulation pppoe [ no ] encapsulation pppoe Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures PPPoE as the encapsulation method for the interface. The no version Description removes PPPoE encapsulation from the interface. Interface Configuration, Subinterface Configuration Mode encapsulation pppoe...
Page 613: Encapsulation Vlan
Chapter 6: E Commands encapsulation vlan [ no ] encapsulation vlan Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures VLAN as the encapsulation method for the interface. The no version Description removes VLAN encapsulation from the interface. Interface Configuration, Subinterface Configuration Mode Configuring Ethernet/VLAN Layer 2 Services, Configuring Local Cross-Connects Related Topics...
Page 614: Encryption
JUNOSe 11.1.x Command Reference Guide A to M encryption encryption { des | 3des } Syntax no encryption Command introduced before JUNOSe Release 7.1.0. Release Information Sets the encryption algorithm to use in the IKE policy. The no version restores the Description default, 3DES.
Page 615: End
Chapter 6: E Commands Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Exits Global Configuration mode or any of the Configuration submodes and returns Description to the User Exec mode. There is no no version. Global Configuration Mode...
Page 616: Enrollment Retry-Limit
JUNOSe 11.1.x Command Reference Guide A to M enrollment retry-limit enrollment retry-limit minutes Syntax no enrollment retry-limit Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the number of minutes during which the router continues to send a Description certificate request to the CA. The no version restores the default. minutes—Number of minutes, from 0 (infinite time period) to 480;...
Page 617: Enrollment Retry-Period
Chapter 6: E Commands enrollment retry-period enrollment retry-period minutes Syntax no enrollment retry-period Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the number of minutes that the router waits after receiving no response Description before resending a certificate request to the CA. The no version restores the default. minutes Number of minutes in the range 0–60 minutes;...
Page 618: Enrollment Url
JUNOSe 11.1.x Command Reference Guide A to M enrollment url enrollment url url Syntax no enrollment url Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the URL of the simple certificate enrollment protocol (SCEP) server to which Description the router sends CA certificate requests (using the ipsec ca authenticate command) and public certificate requests (using the ipsec ca enroll command).
Page 619: Equipment Loopback
Chapter 6: E Commands equipment loopback equipment { customer | network } loopback Syntax no equipment Command introduced before JUNOSe Release 7.1.0. Release Information Enables or disables the router's ability to be placed in loopback by a remote device Description connected on a CT3 or T3 interface.
Page 620: Erase Secrets
JUNOSe 11.1.x Command Reference Guide A to M erase secrets erase secrets seconds Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes all CLI passwords or secrets. Execute before pressing the NMI button on Description the SRP module. There is no no version. NOTE: If you enter the service unattended password-recovery command, the behavior of the erase secrets command changes.
Page 621: Ethernet Description
Chapter 6: E Commands ethernet description ethernet description name Syntax no ethernet description Command introduced before JUNOSe Release 7.1.0. Release Information Adds a text description to a non-SRP Fast Ethernet or Gigabit Ethernet interface. The Description no version removes the description from the interface. name String of up to 64 characters Options Interface Configuration...
Page 622: Ethernet Dos-Protection-Group
JUNOSe 11.1.x Command Reference Guide A to M ethernet dos-protection-group ethernet dos-protection-group groupName Syntax no ethernet dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches an Ethernet denial of service (DoS) protection group to an interface. The Description no version removes the attachment of the DoS protection group from the interface. groupName Name of the DoS protection group;...
Page 623: Ethernet Oam Lfm
Chapter 6: E Commands ethernet oam lfm [ no ] ethernet oam lfm Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Enables 802.3ah Ethernet Operation, Administration, and Maintenance (OAM) Description link-fault management on an interface. Enabling IEEE 802.3ah OAM functionality on a physical interface automatically triggers the discovery process.
Page 624: Ethernet Oam Lfm High-Threshold
JUNOSe 11.1.x Command Reference Guide A to M ethernet oam lfm high-threshold [ no ] ethernet oam lfm high-threshold { disable-interface | failover } Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Configures a specific action to occur when a high threshold for an error is exceeded Description on an Ethernet OAM interface.
Page 625: Ethernet Oam Lfm Link-Monitor Frame-Seconds
Chapter 6: E Commands ethernet oam lfm link-monitor frame-seconds [ no ] ethernet oam lfm link-monitor frame-seconds { threshold { high { highFrames Syntax | none } | low lowFrames } | window period } Command introduced in JUNOSe Release 11.1.0. Release Information Configures a threshold value for sending frame error events that triggers an action Description...
Page 626 JUNOSe 11.1.x Command Reference Guide A to M OAM Link Monitoring Feature Related Topics Configuring 802.3ah OAM Link-Fault Management ethernet oam lfm link-monitor symbol-period on page 587 ethernet oam lfm link-monitor frame-seconds-summary on page 585 Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote Failure Monitoring on an Interface ethernet oam lfm link-monitor frame-seconds...
Page 627: Ethernet Oam Lfm Link-Monitor Frame-Seconds-Summary
Chapter 6: E Commands ethernet oam lfm link-monitor frame-seconds-summary [ no ] ethernet oam lfm link-monitor frame-seconds-summary { threshold { high Syntax { highSummary | none } | low lowSummary } | window period } Command introduced in JUNOSe Release 11.1.0. Release Information Configures a threshold value for frame period summary error events that triggers an Description...
Page 628 JUNOSe 11.1.x Command Reference Guide A to M OAM Link Monitoring Feature Related Topics Configuring 802.3ah OAM Link-Fault Management ethernet oam lfm link-monitor symbol-period on page 587 ethernet oam lfm link-monitor frame-seconds on page 583 Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote Failure Monitoring on an Interface ethernet oam lfm link-monitor frame-seconds-summary...
Page 629: Ethernet Oam Lfm Link-Monitor Symbol-Period
Chapter 6: E Commands ethernet oam lfm link-monitor symbol-period [ no ] ethernet oam lfm link-monitor symbol-period { threshold { high { highFrames Syntax | none } | low lowFrames } | window period } Command introduced in JUNOSe Release 11.1.0. Release Information Configures a threshold value for symbol error events that triggers an action or causes Description...
Page 630 JUNOSe 11.1.x Command Reference Guide A to M OAM Link Monitoring Feature Related Topics Configuring 802.3ah OAM Link-Fault Management ethernet oam lfm link-monitor symbol-period on page 587 ethernet oam lfm link-monitor frame-seconds on page 583 Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote Failure Monitoring on an Interface ethernet oam lfm link-monitor symbol-period...
Page 631: Ethernet Oam Lfm Mode
Chapter 6: E Commands ethernet oam lfm mode [ no ] ethernet oam lfm mode { active | passive } [ pdu-lost-threshold Syntax pduLostPackets ] Command introduced in JUNOSe Release 11.1.0. Release Information Configures the discovery mode to be used for IEEE 802.3ah OAM link-fault Description management support on an interface as active or passive.
Page 632: Ethernet Oam Lfm Pdu-Lost-Threshold
JUNOSe 11.1.x Command Reference Guide A to M ethernet oam lfm pdu-lost-threshold [ no ] ethernet oam lfm pdu-lost-threshold pduLostPackets Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Configures the number of OAM protocol data units (PDUs) that a local OAM client Description can fail to receive from a remote peer before a link-fault event is triggered.
Page 633: Ethernet Oam Lfm Pdu-Transmit-Interval
Chapter 6: E Commands ethernet oam lfm pdu-transmit-interval [ no ] ethernet oam lfm pdu-transmit-interval period [ mode { active | passive } | Syntax pdu-lost-threshold pduLostPackets ] Command introduced in JUNOSe Release 11.1.0. Release Information Configures the minimum rate at which OAM protocol data units (PDUs) are Description transmitted in milliseconds.
Page 634: Ethernet Oam Lfm Remote-Failure
JUNOSe 11.1.x Command Reference Guide A to M ethernet oam lfm remote-failure [ no ] ethernet oam lfm remote-failure { critical-event | dying-gasp | link-fault } action Syntax { disable-interface | failover } Command introduced in JUNOSe Release 11.1.0. Release Information Configures the Ethernet OAM link-fault management functionality to detect failure Description conditions that occurred in the receive path of the link, and to influence the state of...
Page 635 Chapter 6: E Commands Example: Configuring 802.3ah OAM Link-Fault Management and Enabling Remote Failure Monitoring on an Interface ethernet oam lfm remote-failure...
Page 636: Ethernet Oam Lfm Remote-Loopback
JUNOSe 11.1.x Command Reference Guide A to M ethernet oam lfm remote-loopback ethernet oam lfm remote-loopback { start | stop } interfaceType interfaceSpecifier Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Enables or disables remote loopback functionality on the remote OAM entity. Also Description causes the remote peer to commence or halt sending of all received frames from the local entity to the specified interface, except OAM PDUs, without any changes...
Page 637: Ethernet Oam Lfm Remote-Loopback Supported
Chapter 6: E Commands ethernet oam lfm remote-loopback supported [ no ] ethernet oam lfm remote-loopback supported Syntax Command introduced in JUNOSe Release 11.1.0. Release Information Configures Ethernet OAM remote loopback functionality on an interface and causes Description the interface to receive and respond to remote loopback requests from peers. The no version disables the remote loopback behavior on the interface, which is the default behavior.
Page 638: Event
JUNOSe 11.1.x Command Reference Guide A to M event [ no ] event eventOwner eventName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates an event and launches the event configuration mode in the SNMP server Description event manager. The no version removes the event. eventOwner Owner associated with this event;...
Page 639: Exceeded-Action
Chapter 6: E Commands exceeded-action For IP and IPv6 rate-limit profiles: Syntax [ no ] exceeded-action { drop | transmit | mark markVal } For L2TP rate-limit profiles: [ no ] exceeded-action { drop | transmit } For MPLS rate-limit profiles: [ no ] exceeded-action { drop | transmit | mark-exp expValue } For hierarchical rate-limit profiles: [ no ] exceeded-action { drop | transmit [ conditional | final ] }...
Page 640: Exceeded-Drop-Threshold
JUNOSe 11.1.x Command Reference Guide A to M exceeded-drop-threshold exceeded-drop-threshold exceededDropThreshold Syntax no exceeded-drop-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Configures the threshold above which exceeded-drop-events are logged. The no Description version removes the threshold. exceededDropThreshold—Bits per second in the range 0–1073741824 Options Statistics Profile Configuration Mode...
Page 641: Exceeded-Fraction
Chapter 6: E Commands exceeded-fraction exceeded-fraction exceededFraction Syntax no exceeded-fraction Command introduced before JUNOSe Release 7.1.0. Release Information Sets the percentage of the total queue length that can be occupied before dropping Description exceeded packets. The no version returns the exceeded fraction to its default setting. exceededFraction Percentage range 0–100;...
Page 642: Exceeded-Length
JUNOSe 11.1.x Command Reference Guide A to M exceeded-length exceeded-length minimumExceededLength [ maximumExceededLength ] Syntax no exceeded-length Command introduced before JUNOSe Release 7.1.0. Release Information Sets minimum and maximum constraints for the queue's exceeded lengths. The no Description version removes constraints on the queue's exceeded length. minimumExceededLength Range 0–1073741824 Options maximumExceededLength Range 0–1073741824...
Page 643: Exceeded-Threshold
Chapter 6: E Commands exceeded-threshold exceeded-threshold { percent MinThresholdPercent MaxThresholdPercent | Syntax MinThresholdBytes MaxThresholdBytes } MaxDropProbability no exceeded-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the exceeded queue thresholds and maximum drop probability. The no Description version removes exceeded threshold. percent Specifies exceeded queue thresholds as percentages Options MinThresholdPercent Minimum queue threshold as a percentage of queue length...
Page 644: Exception Dump
JUNOSe 11.1.x Command Reference Guide A to M exception dump exception dump { except-srp | srp-only } { local | ipAddress [ directoryName ] } Syntax no exception dump Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the location from and to which the router should transfer a core dump file. Description Core dumps are enabled and stored in local NVS by default.
Page 645: Exception Gateway
Chapter 6: E Commands exception gateway exception gateway ipAddress Syntax no exception gateway Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the gateway through which the router sends the core dump file to the remote Description FTP server. The no version returns the value to its default (null). ipAddress—IP address of the gateway Options Global Configuration...
Page 646: Exception Http-Redirect
JUNOSe 11.1.x Command Reference Guide A to M exception http-redirect [ no ] exception http-redirect Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Creates the exception rule within an IPv4 or IPv6 policy classifier group so the Description application can perform an application-dependent action on the content of the packet. HTTP redirect is the only application that is available as a destination of the exception rule.
Page 647: Exception Monitor
Chapter 6: E Commands exception monitor exception monitor ipAddress [ directoryName ] Syntax no exception monitor Command introduced before JUNOSe Release 7.1.0. Release Information Enables the core dump monitor and specifies the location to which the router transfers Description core dump files. The no version disables the core dump monitor. ipAddress IP address of the server to which you want the router to transfer core Options dump files...
Page 648: Exception Monitor Interval
JUNOSe 11.1.x Command Reference Guide A to M exception monitor interval exception monitor interval interval Syntax no exception monitor interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interval at which you want the router to check NVS for core dump files. Description The no version disables the core dump monitor.
Page 649: Exception Protocol Ftp
Chapter 6: E Commands exception protocol ftp exception protocol ftp [ [ algorithmType ] userName [ [ algorithmType ] password ] ] Syntax no exception protocol Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the username and password for FTP access to a host where you transferred Description a core dump file.
Page 650: Exception Source
JUNOSe 11.1.x Command Reference Guide A to M exception source exception source ipAddress ipAddressMask Syntax no exception source Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address and mask of the router interface over which you want to Description send the core dump file to the remote FTP server.
Page 651: Excess-Burst
Chapter 6: E Commands excess-burst excess-burst { size | millisecond milliseconds } Syntax no excess-burst Command introduced before JUNOSe Release 7.1.0. Release Information Sets amount of bandwidth allocated to accommodate a packet in progress when the Description rate is in excess of the burst. The no version restores the default value, 0. size Amount of bandwidth allocated;...
Page 652: Exclude-Prefix
JUNOSe 11.1.x Command Reference Guide A to M exclude-prefix [ no ] exclude-prefix Ipv6Prefix [ endIpv6prefix ] Syntax Command introduced in JUNOSe Release 10.1.0. Release Information Specifies the IPv6 prefix or range of prefixes to exclude from being allocated to the Description requesting router.
Page 653: Exclude-Subsystem
Chapter 6: E Commands exclude-subsystem exclude-subsystem subsystemName Syntax no exclude-subsystem [ subsystemName ] Command introduced before JUNOSe Release 7.1.0. Release Information Excludes subsystem files from being copied when you copy a software release to Description the router. The no version removes the exclusion for a specified subsystem file or all subsystem files.
Page 654: Exec-Banner
JUNOSe 11.1.x Command Reference Guide A to M exec-banner [ no | default ] exec-banner Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Controls display of an exec banner (configured with the banner command) on a Description particular line after user authentication (if any) and before the first prompt of a CLI session.
Page 655: Exec-Timeout
Chapter 6: E Commands exec-timeout exec-timeout minutes [ seconds ] Syntax no exec-timeout Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time interval that the console or vty line waits for expected user input. The Description no version restores the default value, which is no time limit. minutes—Number of minutes for the time limit;...
Page 656: Existence-Test
JUNOSe 11.1.x Command Reference Guide A to M existence-test existence-test { event eventOwner eventName | Syntax startup { absent | present } | test-type { absent | changed | present } } no existence-test [ event | startup | test-type ] Command introduced before JUNOSe Release 7.1.0.
Page 657: Exit
Chapter 6: E Commands exit exit Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Exits the current command mode. In User Exec and Privileged Exec modes, logs out Description of the CLI. There is no no version. All modes Mode exit...
Page 658: Exit-Address-Family
JUNOSe 11.1.x Command Reference Guide A to M exit-address-family exit-address-family Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Exits from Address Family Configuration mode and returns to Router Configuration Description mode. There is no no version. Address Family Configuration Mode Configuring BGP Signaling for L2VPNs and Configuring BGP Signaling for VPLS in Related Topics...
Page 659: Exit-Remote-Neighbor
Chapter 6: E Commands exit-remote-neighbor exit-remote-neighbor Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Exits from Remote Neighbor Configuration mode and returns to Router Configuration Description mode. There is no no version. Remote Neighbor Configuration Mode exit-remote-neighbor...
Page 660: Exp-Mask
JUNOSe 11.1.x Command Reference Guide A to M exp-mask [ no ] exp-mask maskValue Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the EXP mask to be applied with the mark values. The no version restores the Description default mask of 7.
Page 661: Export Destination
Chapter 6: E Commands export destination [ no ] export destination { hostName | ipAddress } udp-port Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Configures an export destination for the aggregation cache. The no version removes Description the destination. hostName Name of the destination host Options ipAddress Address of IP interface...
Page 662: Export Map
JUNOSe 11.1.x Command Reference Guide A to M export map export map [ ipv4 | ipv6 ] routeMap [ filter ] Syntax no export map [ ipv4 | ipv6 ] Command introduced before JUNOSe Release 7.1.0. Release Information Associates a route map with a VRF to modify or filter routes exported by the VRF to Description the global BGP VPN RIB in the parent VR.
Page 663: Export Source
Chapter 6: E Commands export source [ no ] export source interface interface Syntax Command introduced in JUNOSe Release 8.1.0. Release Information Sets the source IP address for datagrams containing information from the cache. Description The no version removes the setting of the IP address. interface Name of the interface Options Flow Cache Configuration...
Page 664: Extended-Authentication
JUNOSe 11.1.x Command Reference Guide A to M extended-authentication extended-authentication { none | pap | chap } [ re-authenticate ] Syntax [ skip-peer-config ] no extended-authentication Command introduced in JUNOSe Release 7.3.0. Release Information Specifies the extended user authentication protocol for use during the extended user Description authentication protocol exchange.
Page 665: External-Paths
Chapter 6: E Commands external-paths external-paths limit Syntax no external-paths Command introduced in JUNOSe Release 8.2.0. Release Information Configures the maximum number of received external BGP best paths allowed for Description route-target signaling. The no version restores the default value, 1. limit Number of paths, in the range 1–255 Options Address Family Configuration, Router Configuration...
Page 666 JUNOSe 11.1.x Command Reference Guide A to M external-paths...
Page 667: F Commands
Chapter 7 F Commands...
Page 668: Fabric-Strict-Priority
JUNOSe 11.1.x Command Reference Guide A to M fabric-strict-priority [ no ] fabric-strict-priority Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies strict priority scheduling for queues in the traffic class in the fabric. The no Description version deletes the strict priority setting. Traffic Class Configuration Mode fabric-strict-priority...
Page 669: Fabric-Weight
Chapter 7: F Commands fabric-weight fabric-weight weight Syntax no fabric-weight Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the relative weight for queues in the traffic class in the fabric. The no version Description sets the fabric weight to the default value. weight Range 1–63;...
Page 670: Fabric Weights
JUNOSe 11.1.x Command Reference Guide A to M fabric weights fabric weights multicast multicastValue unicast unicastValue Syntax no fabric weights Command introduced in JUNOSe Release 7.2.0. Release Information Defines the multicast-to-unicast traffic ratio for the ERX1440, ERX310, E120, or E320 Description router switch fabric.
Page 671: Failover-Resync
Chapter 7: F Commands failover-resync failover-resync { failover-protocol | failover-protocol-fallback-to-silent-failover | Syntax silent-failover | disable | not-configured } no failover-resync Command introduced in JUNOSe Release 7.3.0. Release Information Configures the L2TP peer resynchronization method that an L2TP failed endpoint Description uses to resynchronize with its peer non-failed endpoint.
Page 672: Filter
JUNOSe 11.1.x Command Reference Guide A to M filter [ no ] [ suspend ] filter Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a policy rule that drops all packets conforming to the current classifier control Description list and can be used while the policy list is referenced by interfaces.
Page 673: Flash-Disk Compare
Chapter 7: F Commands flash-disk compare flash-disk compare { all | configuration } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Performs a checksum validation that compares the contents of the NVS file system Description on the primary SRP module with the contents of the NVS file system on the redundant SRP module, and detects any differences.
Page 674: Flash-Disk Duplicate
JUNOSe 11.1.x Command Reference Guide A to M flash-disk duplicate flash-disk duplicate Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Copies the contents of NVS on the primary SRP module to another NVS card. There Description is no no version. Boot Mode flash-disk duplicate...
Page 675: Flash-Disk Initialize
Chapter 7: F Commands flash-disk initialize flash-disk initialize [ no-format ] [ disk0 | disk1 ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information disk0 and disk1 keywords added in JUNOSe Release 7.2.0. Privileged Exec mode added in JUNOSe Release 8.0.0. Performs a low-level format of unmounted flash cards.
Page 676: Flash-Disk Scan
JUNOSe 11.1.x Command Reference Guide A to M flash-disk scan flash-disk scan [ repair ] [ disk0 | disk1 ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information disk0 and disk1 keywords added in JUNOSe Release 7.2.0. Privileged Exec mode added in JUNOSe Release 8.0.0. Scans the flash card on the primary SRP module to detect corrupt sectors, deletes Description files and directories that contain corrupt sectors, and fixes nonfatal errors.
Page 677: Forward
Chapter 7: F Commands forward [ no ] [ suspend ] forward Syntax [ interface interfaceType interfaceSpecifier [ next-hop nextHop [ ignore-default-route ] ] [ order orderValue ] ] | [ next-hop nextHop [ virtual-router vrName ] [ ignore-default-route ] [ order orderValue ] ] | [ order orderValue ] | classifier-group claclName ] [ precedence precValue ] Command introduced before JUNOSe Release 7.1.0.
Page 678: Forward Interface
JUNOSe 11.1.x Command Reference Guide A to M forward interface [ no ] [ suspend ] forward [ interface interfaceType interfaceSpecifier Syntax [ next-hop nextHop [ ignore-default-route ] ] [ order orderValue ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines a rule to forward all packets that match the current classifier control list.
Page 679: Forward Next-Hop
Chapter 7: F Commands forward next-hop [ no ] [ suspend ] forward next-hop nextHop [ virtual-router vrName ] Syntax [ ignore-default-route ] [ order orderValue ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines a rule to forward all packets that match the current classifier control list. The Description no version removes the rule from the policy list;...
Page 680: Forwarding-Rate-Threshold
JUNOSe 11.1.x Command Reference Guide A to M forwarding-rate-threshold forwarding-rate-threshold forwardingRateThreshold Syntax no forwarding-rate-threshold Command introduced before JUNOSe Release 7.1.0. Release Information Configures the threshold above which forwarded-rate-exceeded events are logged. Description The no version removes the threshold. forwardingRateThreshold—Bits per second in the range 0–1073741824 Options Statistics Profile Configuration Mode...
Page 681: Forwarding-Table Route-Holddown
Chapter 7: F Commands forwarding-table route-holddown forwarding-table route-holddown timerValue Syntax no forwarding-table route-holddown Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of seconds allowed after a routing table change for the accumulation Description of additional updates and subsequent distribution of the set of routing table changes to the line modules.
Page 682: Frame-Relay Class
JUNOSe 11.1.x Command Reference Guide A to M frame-relay class [ no ] frame-relay class mapName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Associates a map class with a subinterface. The no version removes the association Description between the map class and the subinterface. mapName Name of the map class;...
Page 683: Frame-Relay Classifier-List
Chapter 7: F Commands frame-relay classifier-list frame-relay classifier-list classifierName [ traffic-class trafficClassName ] Syntax [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ] [ de-bit deValue ] no frame-relay classifier-list classifierName [ classifierNumber ] Command introduced before JUNOSe Release 7.1.0. Release Information Creates or modifies a Frame Relay classifier control list.
Page 684: Frame-Relay Description
JUNOSe 11.1.x Command Reference Guide A to M frame-relay description frame-relay description name Syntax no frame-relay description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a Frame Relay interface or subinterface. Use Description the show frame-relay interface or show frame-relay subinterface command to display the text description.
Page 685: Frame-Relay Dos-Protection-Group
Chapter 7: F Commands frame-relay dos-protection-group frame-relay dos-protection-group groupName Syntax no frame-relay dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches a Frame Relay denial of service (DoS) protection group to an interface. The Description no version removes the attachment of the DoS protection group from the interface. groupName Name of the DoS protection group;...
Page 686: Frame-Relay Fragment
JUNOSe 11.1.x Command Reference Guide A to M frame-relay fragment frame-relay fragment [ [ fragmentSize ] [ fragmentation-only ] | reassembly-only ] Syntax no frame-relay fragment Command introduced before JUNOSe Release 7.1.0. Release Information Configures fragmentation and reassembly for the map class created with the Description map-class frame-relay command.
Page 687: Frame-Relay Interface-Dlci Ietf
Chapter 7: F Commands frame-relay interface-dlci ietf frame-relay interface-dlci dlci ietf Syntax no frame-relay interface-dlci dlci Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a data-link connection identifier to a specified Frame Relay subinterface on Description the router or access server. The DLCI number identifies a virtual circuit. The no version removes this assignment.
Page 688: Frame-Relay Intf-Type
JUNOSe 11.1.x Command Reference Guide A to M frame-relay intf-type frame-relay intf-type type Syntax no frame-relay intf-type Command introduced before JUNOSe Release 7.1.0. Release Information Configures a Frame Relay interface type. The no version restores the default value, Description DTE. type One of the following interface types: Options dce Router is connected to user DTE equipment...
Page 689: Frame-Relay Keepalive
Chapter 7: F Commands frame-relay keepalive frame-relay keepalive [ seconds ] Syntax no frame-relay keepalive Command introduced before JUNOSe Release 7.1.0. Release Information Enables the LMI mechanism for serial lines using Frame Relay encapsulation. The Description no version disables this capability. The keepalive command is similar to the frame-relay lmi-t391dte command.
Page 690: Frame-Relay Lmi-N391Dte
JUNOSe 11.1.x Command Reference Guide A to M frame-relay lmi-n391dte frame-relay lmi-n391dte keepExchanges Syntax no frame-relay lmi-n391dte Command introduced before JUNOSe Release 7.1.0. Release Information Sets the full-status polling counter (N391) on a DTE interface. The no version restores Description the default value, assuming an LMI has been configured.
Page 691: Frame-Relay Lmi-N392Dce
Chapter 7: F Commands frame-relay lmi-n392dce frame-relay lmi-n392dce threshold Syntax no frame-relay lmi-n392dce Command introduced before JUNOSe Release 7.1.0. Release Information Sets the error threshold counter (N392) on a DCE interface. The no version removes Description current setting and sets the default. threshold—Positive number in the range 1–...
Page 692: Frame-Relay Lmi-N392Dte
JUNOSe 11.1.x Command Reference Guide A to M frame-relay lmi-n392dte frame-relay lmi-n392dte threshold Syntax no frame-relay lmi-n392dte Command introduced before JUNOSe Release 7.1.0. Release Information Sets the error threshold counter (N392) on a DTE interface. The no version removes Description current setting and sets the default.
Page 693: Frame-Relay Lmi-N393Dce
Chapter 7: F Commands frame-relay lmi-n393dce frame-relay lmi-n393dce events Syntax no frame-relay lmi-n393dce Command introduced before JUNOSe Release 7.1.0. Release Information Sets the monitored events count (N393) on a DCE interface. The no version removes Description current setting and sets the default. events Number in the range 1–10 events;...
Page 694: Frame-Relay Lmi-N393Dte
JUNOSe 11.1.x Command Reference Guide A to M frame-relay lmi-n393dte frame-relay lmi-n393dte events Syntax no frame-relay lmi-n393dte Command introduced before JUNOSe Release 7.1.0. Release Information Sets the monitored event count (N393) on a DTE interface. The no version removes Description current setting and sets the default.
Page 695: Frame-Relay Lmi-T391Dte
Chapter 7: F Commands frame-relay lmi-t391dte frame-relay lmi-t391dte seconds Syntax no frame-relay lmi-t391dte Command introduced before JUNOSe Release 7.1.0. Release Information Sets the link integrity verification polling timer (T391) on a DTE interface. The no Description version removes the current setting and sets the default. seconds—Number in the range 5–30 seconds;...
Page 696: Frame-Relay Lmi-T392Dce
JUNOSe 11.1.x Command Reference Guide A to M frame-relay lmi-t392dce frame-relay lmi-t392dce seconds Syntax no frame-relay lmi-t392dce Command introduced before JUNOSe Release 7.1.0. Release Information Sets the polling verification timer (T392) on a DCE interface. The no version removes Description current setting and sets the default.
Page 697: Frame-Relay Lmi-Type
Chapter 7: F Commands frame-relay lmi-type frame-relay lmi-type type Syntax no frame-relay lmi-type Command introduced before JUNOSe Release 7.1.0. Release Information Selects the LMI type. The no version restores the default value. Description type One of the following types: Options ansi ANSI T1.617 Annex D cisco Original Group of Four specification developed by DEC, Northern Telecom, Stratacom, and Cisco...
Page 698: Frame-Relay Policy
JUNOSe 11.1.x Command Reference Guide A to M frame-relay policy frame-relay policy { input | output } policyName Syntax [ statistics { enabled [ baseline { enabled | disabled } ] [ preserve | merge ] | disabled [ merge ] } | merge ] no frame-relay policy { input | output } [ policyName ] Command introduced before JUNOSe Release 7.1.0.
Page 699: Frame-Relay Policy-List
Chapter 7: F Commands frame-relay policy-list [ no ] frame-relay policy-list policyName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates or modifies a Frame Relay policy list and accesses Policy List Configuration Description mode. If you execute a frame-relay policy-list command and type exit, the router creates a policy list with a filter rule as the default.
Page 700: Framing
JUNOSe 11.1.x Command Reference Guide A to M framing framing framingType Syntax no framing Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the framing mode used by E3 or T3 interfaces. Available modes vary by Description the type of interface. The no version restores the default for that interface. framingType One of the following framing types: Options E3 Frame...
Page 701: Frequency
Chapter 7: F Commands frequency frequency frequencyValue Syntax no frequency Command introduced before JUNOSe Release 7.1.0. Release Information In RTR Configuration mode, sets the time interval between RTR operations. In SNMP Description Event Manager Configuration mode, sets the frequency (in seconds) at which you want MIB sampling to occur.
Page 702: Ftp-Server Enable
JUNOSe 11.1.x Command Reference Guide A to M ftp-server enable [ no ] ftp-server enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the FTP server and monitors the FTP port for attempts to connect to the FTP Description server.
Page 703: Ftp-Server Flush
Chapter 7: F Commands ftp-server flush ftp-server flush Syntax Command introduced in JUNOSe Release 10.0.0. Release Information Forcibly terminates existing file transfer sessions to enable unified ISSU to proceed Description successfully. There is no no version. Privileged Exec Mode FTP Server File Transfers Behaviors in the JUNOSe System Basics Configuration Related Topics Guide ftp-server flush...
Page 704: Full-Spf-Always
JUNOSe 11.1.x Command Reference Guide A to M full-spf-always [ no ] full-spf-always Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables full SPF calculations for ISIS network changes. The no version restores partial Description route calculation (PRC) mode for SPF calculations. Router Configuration Mode full-spf-always...
Page 705: G Commands
Chapter 8 G Commands...
Page 706: Global Export Map
JUNOSe 11.1.x Command Reference Guide A to M global export map global export map [ ipv4 | ipv6 ] routeMap Syntax no global export map [ ipv4 | ipv6 ] Command introduced before JUNOSe Release 7.1.0. Release Information Associates a route map with a VRF to modify and filter routes exported by the VRF Description to the global BGP non-VPN RIB in the parent VR.
Page 707: Global Import Map
Chapter 8: G Commands global import map global import map [ ipv4 | ipv6 ] routeMap max-routes maxNumber Syntax no global import map [ ipv4 | ipv6 ] Command introduced in JUNOSe Release 7.1.0. Release Information Associates a route map with a VRF to modify and filter routes imported by the VRF Description from the global BGP non-VPN RIB in the parent VR.
Page 708: Graceful-Restart
JUNOSe 11.1.x Command Reference Guide A to M graceful-restart [ no ] graceful-restart Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures hitless restart capability for OSPFv2. If high availability is active, the OSPF Description instance can perform a hitless restart when switching or failing over to the secondary SRP module.
Page 709: Graceful-Restart Helper
Chapter 8: G Commands graceful-restart helper [ no ] graceful-restart helper Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router to function as an OSPFv2 or OSPFv3 graceful restart helper Description router. The no version disables OSPF graceful restart helper mode capability on the router.
Page 710: Graceful-Restart Helper-Abort-Topology-Change
JUNOSe 11.1.x Command Reference Guide A to M graceful-restart helper-abort-topology-change graceful-restart helper-abort-topology-change { any | non-externals } Syntax no graceful-restart helper-abort-topology-change Command introduced before JUNOSe Release 7.1.0. Release Information Configures the OSPFv2 or OSPFv3 helper router to cease help to a restarting router Description under the specified conditions.
Page 711: Graceful-Restart Notify-Time
Chapter 8: G Commands graceful-restart notify-time [ no ] graceful-restart notify-time notifyTime Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the estimated time for the OSPFv2 router to send purged grace LSAs over Description all interfaces. The no version returns the notify duration timer to its default value, 15 seconds.
Page 712: Graceful-Restart Restart-Time
JUNOSe 11.1.x Command Reference Guide A to M graceful-restart restart-time [ no ] graceful-restart restart-time restartTime Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the estimated time for the restarting OSPFv2 router to reacquire OSPF Description neighbors that were fully functional prior to the restart. When this timer expires, the restarting router exits the restart procedure, originates any LSAs that were suppressed during the restart, removes any self-originated LSAs that it received from helping neighbors, runs SPF, and updates any routes in the routing table.
Page 713: Grace-Period
Chapter 8: G Commands grace-period grace-period days [ hours [ minutes [ seconds ] ] ] Syntax no grace-period Command introduced in JUNOSe Release 8.0.0. Release Information Configures the grace period for address leases allocated from the current DHCP local Description address pool.
Page 714: Gre Destination Profile
JUNOSe 11.1.x Command Reference Guide A to M gre destination profile gre destination profile profileName { [ any-virtual-router ] | Syntax [ virtual-router virtualRouterName ] } no gre destination profile profileName Command introduced in JUNOSe Release 8.2.0. Release Information Configures a destination profile for dynamic GRE tunnels and enters IP Tunnel Description Destination Profile Configuration mode.
Page 715: Green-Mark
Chapter 8: G Commands green-mark [ no ] green-mark colorMarkValue Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Applies ToS mark value to green packets, which can be from policy actions, earlier Description policies, or rate-limit hierarchies. The no version deletes the ToS mark value. colorMarkValue Value of the ToS mark to be applied: in the range 0–255 Options Color Mark Profile Configuration...
Page 716: Gre-Tunnel Classifier-List
JUNOSe 11.1.x Command Reference Guide A to M gre-tunnel classifier-list gre-tunnel classifier-list classifierName Syntax [ traffic-class className ] [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ] [ precedence precNum | dsfield dsfieldNum | tos tosNum ] no gre-tunnel classifier-list classifierName [ classifierNumber ] Command introduced before JUNOSe Release 7.1.0.
Page 717: Gre-Tunnel Policy
Chapter 8: G Commands gre-tunnel policy gre-tunnel policy { input | output } policyName Syntax [ statistics { enabled | disabled | preserve } | merge ] no gre-tunnel policy { input | output } [ policyName ] Command introduced before JUNOSe Release 7.1.0. Release Information merge keyword added in JUNOSe Release 7.2.0.
Page 718: Gre-Tunnel Policy-List
JUNOSe 11.1.x Command Reference Guide A to M gre-tunnel policy-list [ no ] gre-tunnel policy-list policyName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates the specified policy list and accesses Policy List Configuration mode. If you Description enter the gre-tunnel policy-list command and the policy list does not exist, the router creates a policy list with no rules, the default.
Page 719: Group
Chapter 8: G Commands group To specify a group scheduler node for QoS: Syntax [ no ] typeOfInterface group groupName scheduler-profile schedulerProfileName To specify a Diffie-Hellman group: group { 1 | 2 | 5 } no group Command introduced before JUNOSe Release 7.1.0. Release Information From QoS Profile Configuration mode, specifies that a group scheduler node be Description...
Page 720: Gsmp-Syn-Timeout
JUNOSe 11.1.x Command Reference Guide A to M gsmp-syn-timeout [ no ] gsmp-syn-timeout timeOutValue Syntax Command introduced in JUNOSe Release 11.0.0. Release Information Defines the ANCP neighbor session connection timeout value (in seconds). The Description neighbor session connection is established on the TCP session. The no version reverts the session timeout to its default setting (60 seconds).
Page 721: H Commands
Chapter 9 H Commands...
Page 722: Halt
JUNOSe 11.1.x Command Reference Guide A to M halt The syntax of the command depends on whether you enter it from Boot mode or Syntax Privileged Exec mode. From Boot mode: halt From Privileged Exec mode: halt [ force | primary-srp [ force ] | standby-srp [ force ] ] Command introduced before JUNOSe Release 7.1.0.
Page 723: Hash
Chapter 9: H Commands hash hash { sha | md5 } Syntax no hash Command introduced before JUNOSe Release 7.1.0. Release Information Sets the hash algorithm in an IKE policy. The no version restores the default, SHA-1. Description sha Specifies SHA-1 (HMAC variant) as the hash algorithm Options md5 Specifies MD5 (HMAC variant) as the hash algorithm IKE Policy Configuration...
Page 724: Hdlc Dos-Protection-Group
JUNOSe 11.1.x Command Reference Guide A to M hdlc dos-protection-group hdlc dos-protection-group groupName Syntax no hdlc dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches an HDLC denial of service (DoS) protection group to an interface. The no Description version removes the attachment of the DoS protection group from the interface.
Page 725: Hdlc Down-When-Looped
Chapter 9: H Commands hdlc down-when-looped [ no ] hdlc down-when-looped Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables loopback detection on a Cisco HDLC interface. Loopback detection is disabled Description by default. The no version disables loopback detection. Interface Configuration, Subinterface Configuration Mode hdlc down-when-looped...
Page 726: Hdlc Keepalive
JUNOSe 11.1.x Command Reference Guide A to M hdlc keepalive hdlc keepalive [ seconds ] Syntax no hdlc keepalive Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a keepalive value. The keepalive mechanism tracks the health of the Description connection.
Page 727: Hdlc Shutdown
Chapter 9: H Commands hdlc shutdown [ no ] hdlc shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Stops or restarts a Cisco HDLC session. The no version restarts a Cisco HDLC session. Description Interface Configuration, Subinterface Configuration Mode hdlc shutdown...
Page 728: Hello Hold-Time
JUNOSe 11.1.x Command Reference Guide A to M hello hold-time hello hold-time seconds Syntax no hello hold-time Command introduced before JUNOSe Release 7.1.0. Release Information Configures the MPLS hold time, the period that a sending LSR maintains a record of Description link hello messages from the receiving LSR without receipt of another link hello from that LSR.
Page 729: Hello Interval
Chapter 9: H Commands hello interval hello interval seconds Syntax no hello interval Command introduced in JUNOSe Release 8.1.0. Release Information Specifies the interval between link-hello packets sent by LDP. The no version restores Description the default interval, 5 seconds. seconds Number of seconds, in the range 1–65535 Options LDP Profile Configuration...
Page 730: Hello-Interval
JUNOSe 11.1.x Command Reference Guide A to M hello-interval hello-interval helloInterval Syntax no hello-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interval between hello packets that the router sends on the OSPF Description remote-neighbor interface. The no version restores the default value. helloInterval Number in the range 1–65535 seconds;...
Page 731: Help
Chapter 9: H Commands help help Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Displays basic information about the Help system. There is no no version. Description All modes Mode help...
Page 732: Hops-Of-Statistics-Kept
JUNOSe 11.1.x Command Reference Guide A to M hops-of-statistics-kept hops-of-statistics-kept [ hopsKeptValue ] Syntax no hops-of-statistics-kept Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of hops to keep statistics for an entry. The no version restores the Description default value.
Page 733: Host
Chapter 9: H Commands host host hostname ipAddress [ ftp [ [ userAlgorithmType ] userName Syntax [ [ passwordAlgorithmType ] password ] ] ] | [ tftp ] no host hostname Command introduced before JUNOSe Release 7.1.0. Release Information Adds or modifies an entry to the host table. The no version removes the specified Description host.
Page 734: Hostname
JUNOSe 11.1.x Command Reference Guide A to M hostname hostname hostname Syntax no hostname Command introduced before JUNOSe Release 7.1.0. Release Information Sets the name for the router; this hostname subsequently appears in the router CLI Description prompt. The no version removes the hostname from the router. NOTE: In Domain Map Tunnel Configuration mode, this command has been replaced by the clear suspicious-control-flow-detection command and may be removed completely from Domain Map Tunnel Configuration mode in a future release.
Page 735: Hotfix Activate
Chapter 9: H Commands hotfix activate hotfix activate hfixFilename Syntax no hotfix activate { hfixFilename | all } Command introduced in JUNOSe Release 7.2.0. Release Information Activates the specified hotfix present on the local flash card. The no version Description deactivates the specified hotfix or all currently active hotfixes.
Page 736 JUNOSe 11.1.x Command Reference Guide A to M hotfix activate...
Page 737: I Commands
Chapter 10 I Commands...
Page 738 JUNOSe 11.1.x Command Reference Guide A to M [ no ] id neighborId Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the ANCP neighbor ID in the L2C Neighbor (config-l2c-neighbor) Description Configuration mode. The no version removes the neighbor ID. neighborId ANCP neighbor ID (MAC address) in the form XXXX.XXXX.XXXX Options L2C Neighbor Configuration...
Page 739: Identification
Chapter 10: I Commands identification identification serverId Syntax no identification Command introduced before JUNOSe Release 7.1.0. Release Information From Domain Map Tunnel Configuration or Tunnel Group Tunnel mode, specifies Description the assignment ID of an L2TP tunnel. The no version removes the assignment ID from the tunnel.
Page 740: Idle-Character
JUNOSe 11.1.x Command Reference Guide A to M idle-character idle-character { flags | marks } Syntax no idle-character Command introduced before JUNOSe Release 7.1.0. Release Information Configures the HDLC idle character that is transmitted between HDLC packets. The Description no version restores the default value. flags Sets the idle character to 0x7E;...
Page 741: Igmp Disable
Chapter 10: I Commands igmp disable [ no ] igmp disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables IGMP on a virtual router. The no version reenables IGMP on a virtual router. Description Router Configuration Mode igmp disable...
Page 742: Igmp Promiscuous
JUNOSe 11.1.x Command Reference Guide A to M igmp promiscuous [ no ] igmp promiscuous Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows all IGMP interfaces on the router to accept IGMP reports from hosts on any Description subnet.
Page 743: Ignore-Lsp-Errors
Chapter 10: I Commands ignore-lsp-errors [ no ] ignore-lsp-errors Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Allows the router to ignore IS-IS link-state packets that are received with internal Description checksum errors rather than purging the link-state packets. The no version disables this function.
Page 744: Ike Crl
JUNOSe 11.1.x Command Reference Guide A to M ike crl ike crl { ignored | optional | required } Syntax no ike crl Command introduced before JUNOSe Release 7.1.0. Release Information Controls how the router handles certificate revocation lists (CRLs) during negotiation Description of IKE phase 1 signature authentication.
Page 745: Ike Local-Identity
Chapter 10: I Commands ike local-identity ike local-identity { ip address ipAddress | username userName | domain-name Syntax domainName } no ike local-identity Command introduced in JUNOSe Release 7.3.0. Release Information Sets the local IKE identity used for IKE security association (SA) negotiations. The no Description version removes the local IKE identity.
Page 746: Ike Peer-Identity Distinguished-Name
JUNOSe 11.1.x Command Reference Guide A to M ike peer-identity distinguished-name ike peer-identity distinguished-name dnString Syntax no ike peer-identity ip address distinguished-name Command introduced in JUNOSe Release 7.3.0. Release Information Enables this profile to accept logins from users that present an ASN.1-encoded Description distinguished name as an IKE identity type and the user-provided IKE identity matches each distinguished name field in this profile.
Page 747: Ike Peer-Identity Domain-Name
Chapter 10: I Commands ike peer-identity domain-name ike peer-identity domain-name domainName Syntax no ike peer-identity ip address domain-name Command introduced in JUNOSe Release 7.3.0. Release Information Enables this profile to accept logins from users that present a userFQDN or FQDN Description as an IKE identity type and the domain name portion of the IKE identity matches the domain name setting for this profile.
Page 748: Ike Peer-Identity Ip Address
JUNOSe 11.1.x Command Reference Guide A to M ike peer-identity ip address ike peer-identity ip address ipAddress [ ipMask ] Syntax no ike peer-identity ip address ip address Command introduced in JUNOSe Release 7.3.0. Release Information Enables this profile to accept logins from users that present an IP address as an IKE Description identity type and the IP address resides within the specified network.
Page 749: Ike Peer-Identity Username
Chapter 10: I Commands ike peer-identity username ike peer-identity username userName Syntax no ike peer-identity ip address username Command introduced in JUNOSe Release 7.3.0. Release Information Enables this profile to accept logins from users that present a userFQDN as an IKE Description identity type and the username portion of the IKE identity matches the username setting for this profile.
Page 750: Import Map
JUNOSe 11.1.x Command Reference Guide A to M import map import map [ ipv4 | ipv6 ] routeMap Syntax no import map [ ipv4 | ipv6 ] Command introduced before JUNOSe Release 7.1.0. Release Information Associates a route map with a VRF to modify and filter routes imported by the VRF Description from the global BGP VPN RIB.
Page 751: Inarp
Chapter 10: I Commands inarp inarp [ frequency ] Syntax no inarp Command introduced in JUNOSe Release 7.1.0. Release Information ATM VC Class Configuration mode added in JUNOSe Release 7.3.0. In ATM VC Configuration mode, enables Inverse ARP (InARP) on an ATM PVC that Description resides on an ATM 1483 NBMA subinterface.
Page 752: Include Circuit-Identifier
JUNOSe 11.1.x Command Reference Guide A to M include circuit-identifier include circuit-identifier circuitType [ prepend-circuit-type ] Syntax no include circuit-identifier Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the circuit identifier is included when the router automatically generates Description a username for an IP service profile.
Page 753: Include Dhcp-Option 82
Chapter 10: I Commands include dhcp-option 82 [ no ] include dhcp-option 82 { agent-circuit-id | agent-remote-id } Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Specifies that the agent-circuit-id suboption or the agent-remote-id suboption of the Description DHCP relay agent information option (option 82) is included when the router automatically generates a username for an IP service profile.
Page 754: Include Hostname
JUNOSe 11.1.x Command Reference Guide A to M include hostname [ no ] include hostname Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Specifies that the router's hostname is included when the router automatically Description generates a username for an IP service profile. The no version disables inclusion of the hostname.
Page 755: Include Ip-Address
Chapter 10: I Commands include ip-address [ no ] include ip-address Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the IP address is included when the router automatically generates a Description username for an IP service profile. The no version disables inclusion of the IP address. IP Service Profile Configuration Mode include ip-address...
Page 756: Include Mac-Address
JUNOSe 11.1.x Command Reference Guide A to M include mac-address [ no ] include mac-address Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the MAC address is included when the router automatically generates Description a username for an IP service profile. The no version disables inclusion of the MAC address.
Page 757: Include Virtual-Router-Name
Chapter 10: I Commands include virtual-router-name [ no ] include virtual-router-name Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the virtual router name is included when the router automatically Description generates a username for an IP service profile. The no version disables inclusion of the virtual router name.
Page 758: Index
JUNOSe 11.1.x Command Reference Guide A to M index index indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ] Syntax no index indexNumber Command introduced before JUNOSe Release 7.1.0. Release Information Sets a next hop at a particular index in the MPLS explicit path. The no version removes Description the next hop from the index.
Page 759: Instance-Interface-Type
Chapter 10: I Commands instance-interface-type instance-interface-type {instanceInterfaceType | set | superset } Syntax no instance-interface-type { instanceInterfaceType | all } Command introduced in JUNOSe Release 7.1.0. Release Information lag keyword added in JUNOSe Release 8.1.0. set and superset keywords added in JUNOSe Release 9.2.0. Assigns an instance-interface type to a QoS parameter definition.
Page 760: Interface
JUNOSe 11.1.x Command Reference Guide A to M interface [ no ] interface interfaceType interfaceSpecifier [ extension ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an interface. The no version removes the subinterface or the logical Description interface.
Page 761: Interface Atm
Chapter 10: I Commands interface atm [ no ] interface atm interfaceSpecifier [ multipoint | point-to-point ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an ATM interface or subinterface type. The no version removes the Description interface or subinterface. NOTE: On the OC3-2 GE APS I/O module, you can configure only OC3/STM1 ATM interfaces in ports 0 and 1.
Page 762: Interface-Event-Disable
JUNOSe 11.1.x Command Reference Guide A to M interface-event-disable [ no ] interface-event-disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that RIP does not purge the routing table on a RIP interface that has been Description brought down. The no version restores the default condition, wherein RIP does purge the routing table on an interface after a down event.
Page 763: Interface Fastethernet
Chapter 10: I Commands interface fastEthernet [ no ] interface fastEthernet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a Fast Ethernet interface or subinterface or creates a subinterface over a Description Fast Ethernet interface. The no version removes the interface or subinterface. interfaceSpecifier Particular interface;...
Page 764: Interface Gigabitethernet
JUNOSe 11.1.x Command Reference Guide A to M interface gigabitEthernet [ no ] interface gigabitEthernet interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies or creates a Gigabit Ethernet interface or a subinterface over a Gigabit Description Ethernet interface. The no version removes the interface or subinterface. NOTE: On the GE I/O module, you can configure only the primary port, 0.
Page 765: Interface Ip
Chapter 10: I Commands interface ip [ no ] interface ip interfaceName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a shared IP interface. The no version removes the IP interface. Description interfaceName String of up to 15 characters Options Global Configuration Mode...
Page 766: Interface Ipv6
JUNOSe 11.1.x Command Reference Guide A to M interface ipv6 [ no ] interface ipv6 interfaceName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a shared IPv6 interface. The no version removes the IPv6 interface. Description interfaceName String of up to 15 characters Options Global Configuration Mode...
Page 767: Interface Lag
Chapter 10: I Commands interface lag [ no ] interface lag interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates an IEEE 802.3ad link aggregation group (LAG) interface, also known as a Description LAG bundle, or a subinterface in a LAG bundle. Link aggregation enables you to group multiple Ethernet physical interfaces configured on the same module and with the same characteristics into a single logical interface.
Page 768: Interface Loopback
JUNOSe 11.1.x Command Reference Guide A to M interface loopback [ no ] interface loopback interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a loopback interface, which provides a stable address for protocols (for Description example, BGP, Telnet, or LDP) to use so that they can avoid any impact if a physical interface goes down.
Page 769: Interface Mlframe-Relay
Chapter 10: I Commands interface mlframe-relay [ no ] interface mlframe-relay interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines an MLFR bundle or a subinterface in a bundle. The no version removes the Description bundle or subinterface. interfaceSpecifier—Particular interface;...
Page 770: Interface Mlppp
JUNOSe 11.1.x Command Reference Guide A to M interface mlppp [ no ] interface mlppp interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates an MLPPP network interface, also known as the MLPPP bundle. The no Description version deletes the MLPPP bundle. interfaceSpecifier—Particular interface;...
Page 771: Interface Null 0
Chapter 10: I Commands interface null interface null 0 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Selects the null interface, which does not forward traffic. The null interface acts as Description a data sink. Though you can access the null interface, you cannot configure any values for it or delete it.
Page 772: Interface Pos
JUNOSe 11.1.x Command Reference Guide A to M interface pos [ no ] interface pos interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a Packet over SONET interface. The no version removes the interface. Description interfaceSpecifier—Particular interface; format varies according to interface type; Options see Interface Types and Specifiers on page 5 Global Configuration...
Page 773: Interface Serial
Chapter 10: I Commands interface serial [ no ] interface serial interfaceSpecifier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the location of the serial interface on CT3 and COCX-F3 modules. The no Description version disables the interface. interfaceSpecifier—Particular interface;...
Page 774: Interface Tengigabitethernet
JUNOSe 11.1.x Command Reference Guide A to M interface tenGigabitEthernet [ no ] interface tenGigabitEthernet interfaceSpecifier Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Specifies or creates a 10-Gigabit Ethernet interface or a subinterface over a 10-Gigabit Description Ethernet interface. The no version removes the interface or subinterface. interfaceSpecifier Particular interface;...
Page 775: Interface Tunnel
Chapter 10: I Commands interface tunnel [ no ] interface tunnel interfaceSpecifier [ transport-virtual-router vrName ] Syntax [ ipsec-transport ] Command introduced before JUNOSe Release 7.1.0. Release Information Creates a tunnel interface for use by DVMRP, GRE, IPSec, or MPLS. You can specify Description that the tunnel be established in the routing space of a virtual router other than the current VR.
Page 776: Invert Data
JUNOSe 11.1.x Command Reference Guide A to M invert data [ no ] invert data Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables data stream inversion. Data stream inversion must be turned on by network Description personnel at the other end of the line. The no version disables data stream inversion. Interface Configuration Mode invert data...
Page 777 Chapter 10: I Commands ip { permit | deny } Syntax no ip Command introduced before JUNOSe Release 7.1.0. Release Information Modifies the subscriber policy for IP to define whether the subscriber (client) interfaces Description that belong to a bridge group or to a VPLS instance forward (permit) or filter (deny) IP packets.
Page 778: Ip Access-Routes
JUNOSe 11.1.x Command Reference Guide A to M ip access-routes [ no ] ip access-routes Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the ability to create host access routes on a PPP interface, which is useful Description for the B-RAS application.
Page 779: Ip Access-Route Table-Map
Chapter 10: I Commands ip access-route table-map [ no ] ip access-route table-map mapName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Filters access routes before an access list adds them to the routing table. The no Description version deletes the table map. mapName Name of the table map that you want the router to use Options Global Configuration...
Page 780: Ip Address
JUNOSe 11.1.x Command Reference Guide A to M ip address ip address ipAddress ipMask [ secondary ] Syntax no ip address [ ipAddress ipMask [ secondary ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Sets a primary or secondary IP address for an interface or subinterface. The no Description version removes an IP address or disables IP processing.
Page 781: Ip-Address
Chapter 10: I Commands ip-address ip-address ipAddress Syntax [ no ] ip-address Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address parameter for a user entry in the local user database. The Description no version deletes the IP address parameter from the user entry. ipAddress IP address in 32-bit dotted decimal format (for example, 192.56.32.2) Options Local User Configuration...
Page 782: Ip Address-Pool
JUNOSe 11.1.x Command Reference Guide A to M ip address-pool ip address-pool { dhcp | local | none } Syntax no ip address-pool Command introduced before JUNOSe Release 7.1.0. Release Information Specifies to the router where to get an IP address for the remote user. The no version Description uses the default value, local.
Page 783: Ip-Address-Pool
Chapter 10: I Commands ip-address-pool ip-address-pool poolName Syntax no ip-address-pool Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address pool parameter for a user entry in the local user database. Description The address pool is used to assign an IP address to the subscriber. The no version deletes the IP address pool parameter from the user entry in the local user database.
Page 784: Ip Address Virtual-Router
JUNOSe 11.1.x Command Reference Guide A to M ip address virtual-router [ no ] ip address ipAddress virtual-router vrName Syntax no ip address Command introduced in JUNOSe Release 7.3.0. Release Information Limits the scope of the IKE policy rule to the specified local IP address on the specified Description virtual router.
Page 785: Ip Alwaysup
Chapter 10: I Commands ip alwaysup [ no ] ip alwaysup Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Forces the interface to appear as if it is up, regardless of the state of the lower layers. Description Use this command to reduce routing protocol topology changes on the router when the network attached to this link is single-homed.
Page 786: Ip Analyzer
JUNOSe 11.1.x Command Reference Guide A to M ip analyzer ip analyzer [ default ] Syntax no ip analyzer Command introduced before JUNOSe Release 7.1.0. Release Information Configures an interface as an analyzer interface, for use in an interface mirroring Description configuration.
Page 787: Ip As-Path Access-List
Chapter 10: I Commands ip as-path access-list ip as-path access-list accessListName { permit | deny } pathExpression Syntax no ip as-path access-list accessListName [ { permit | deny } pathExpression ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines a BGP-related access list. You can specify an access list filter on both inbound Description and outbound BGP routes.
Page 788 JUNOSe 11.1.x Command Reference Guide A to M ^ matches any AS number except the ones specified when used as a first item within brackets _ underscore; used in implementations on routers from other vendors on either side of a path to specify a literal and disallow substring matching. Allowed but not required in our CLI.
Page 789: Ip Atm-Vc
Chapter 10: I Commands ip atm-vc ip ipAddress atm-vc vcd broadcast Syntax no ip ipAddress atm-vc vcd Command introduced before JUNOSe Release 7.1.0. Release Information Associates a protocol and address to a specific virtual circuit. The no version removes Description the association.
Page 790: Ip Auto-Configure Ip-Subscriber
JUNOSe 11.1.x Command Reference Guide A to M ip auto-configure ip-subscriber [ no ] ip auto-configure ip-subscriber [ include-primary | exclude-primary ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information include-primary and exclude-primary keywords added in JUNOSe Release 7.1.0. Configures a primary IP interface to support creation of dynamic subscriber interfaces.
Page 791: Ip Auto-Detect Ip-Subscriber
Chapter 10: I Commands ip auto-detect ip-subscriber [ no ] ip auto-detect ip-subscriber Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the router's packet detect feature, specifying that IP automatically detect packets Description that do not match any entries in the demultiplexer table. When an unmatched packet is detected, an event is generated that determines whether to create a dynamic subscriber interface or to configure an existing interface.
Page 792: Ip Bgp-Community New-Format
JUNOSe 11.1.x Command Reference Guide A to M ip bgp-community new-format [ no ] ip bgp-community new-format Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that communities must be displayed in AA:NN format, where AA is a number Description that identifies the autonomous system and NN is a number that identifies the community within the autonomous system.
Page 793: Ip Bgp-Confed-As-Set New-Format
Chapter 10: I Commands ip bgp-confed-as-set new-format [ no ] ip bgp-confed-as-set new-format Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that AS-confed-sets must be displayed within square brackets, [ ], with the Description ASs delimited by commas. The no version restores the default, displaying AS-confed-sets within parentheses, ( ), with the ASs delimited by spaces.
Page 794: Ip Block-Multicast-Sources
JUNOSe 11.1.x Command Reference Guide A to M ip block-multicast-sources [ no ] ip block-multicast-sources Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Profile Configuration mode added in JUNOSe Release 8.1.0. Prevents mroute creation by blocking multicast traffic that has a scope larger than Description link-local (for example, global).
Page 795: Ip Broadcast-Address
Chapter 10: I Commands ip broadcast-address [ no ] ip broadcast-address [ ipAddress ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a broadcast address for an interface. The no version restores the default IP Description broadcast address. ipAddress Broadcast IP address Options Interface Configuration, Subinterface Configuration...
Page 796: Ip Classifier-List
JUNOSe 11.1.x Command Reference Guide A to M ip classifier-list ip classifier-list classifierName [ traffic-class trafficClassName ] Syntax [ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ] [ source-route-class routeClassValue ] [destination-route-class routeClassValue ] [ local { true | false } ] [ not ] { protocol } [ not ] { sourceAddress sourceMask | host sourceHostAddress | any } [ sourceQualifier ] [ not ] { destinationAddress destinationMask | host destinationHostAddress | any }...
Page 797 Chapter 10: I Commands sourceQualifier For UDP or TCP protocols, one of the following protocol-specific classifier parameters. See Creating or Modifying Classifier Control Lists for IP Policy Lists for details. portOperator—One of the following Boolean operator keywords: lt (less than), gt (greater than), eq (equal to), ne (not equal), or range (range of port numbers) range Single port number or a range of port numbers...
Page 798 JUNOSe 11.1.x Command Reference Guide A to M eq 0 Equals 0 eq 1 Equals 1 gt 1 Greater than 1 precNum Upper three bits of the ToS byte; in the range 0–7 dsFieldNum Upper six bits of the ToS byte; in the range 0–63 tosNum Whole eight bits of the ToS byte;...
Page 799: Ip Community-List
Chapter 10: I Commands ip community-list Using a regular expression to specify the community: Syntax [ no ] ip community-list communityLisName { permit | deny } communityExpression Using some other method to specify the community: ip community-list communityLisName { permit | deny } { communityNumber | asCommunityNumber | no-export | no-advertise | local-as | internet } [ communityNumber | asCommunityNumber | no-export | no-advertise | local-as | internet ]*...
Page 800: Ip Debounce-Time
JUNOSe 11.1.x Command Reference Guide A to M ip debounce-time ip debounce-time [ vrf vrfName ] period Syntax no ip debounce-time [ vrf vrfName ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines the minimum time an IP interface must be in a given state for example, Description up or down before being reported.
Page 801: Ip Demux-Type Da-Prefix
Chapter 10: I Commands ip demux-type da-prefix [ no ] ip demux-type da-prefix Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that a subscriber interface will demultiplex traffic using destination Description addresses. The no version restores the default situation, in which the subscriber interface demultiplexes traffic using source addresses.
Page 802: Ip Description
JUNOSe 11.1.x Command Reference Guide A to M ip description ip description name Syntax no ip description Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a text description or an alias to a static IP interface or subinterface. If no IP Description interface currently exists, then a static IP interface is automatically created on the current layer 2 interface and the description is applied to that static IP interface.
Page 803: Ip Destination-Prefix
Chapter 10: I Commands ip destination-prefix [ no ] ip destination-prefix ipAddress ipAddressMask deny Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a subscriber interface or a primary IP interface that is enabled for dynamic Description creation of subscriber interfaces to demultiplex traffic with the specified destination address.
Page 804: Ip Dhcp-Capture
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-capture ip dhcp-capture { all | receive | transmit } [ priority { low | high } ] Syntax no ip dhcp-capture { all | receive | transmit } Command introduced in JUNOSe Release 7.3.0. Release Information Configures the E Series router to capture and log DHCP packet information for an Description...
Page 805: Ip Dhcp-External Auto-Configure
Chapter 10: I Commands ip dhcp-external auto-configure [ no ] ip dhcp-external auto-configure [ agent-circuit-identifier ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information agent-circuit-identifier keyword added in JUNOSe Release 7.3.0. Configures the E Series router to automatically create the user's DSI. This command Description is specific to a virtual router.
Page 806: Ip Dhcp-External Disregard-Giaddr-Next-Hop
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-external disregard-giaddr-next-hop [ no ] ip dhcp-external disregard-giaddr-next-hop Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures the DHCP external application to disregard the giaddr in packets destined Description for the DHCP server when the next hop for a subscriber's access route is determined. The no version returns to the default, in which DHCP external uses the giaddr to determine the next hop.
Page 807: Ip Dhcp-External Recreate-Subscriber-Interface
Chapter 10: I Commands ip dhcp-external recreate-subscriber-interface [ no ] ip dhcp-external recreate-subscriber-interface Syntax Command introduced in JUNOSe Release 9.2.0. Release Information Configures the DHCP external server application to delete and re-create the existing Description dynamic subscriber interface after a bound DHCP client extends its IP address lease by restarting the DHCP discovery process on its primary IP interface instead of by initiating the DHCP renewal process on its dynamic subscriber interface.
Page 808: Ip Dhcp-External Server-Address
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-external server-address [ no ] ip dhcp-external server-address ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a DHCP server that is used to determine which DHCP packets are Description monitored.
Page 809: Ip Dhcp-External Server-Sync
Chapter 10: I Commands ip dhcp-external server-sync [ no ] ip dhcp-external server-sync Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates subscriber state information based on lease renewals when the external Description DHCP server is unsynchronized with the E Series router. The no version disables this feature.
Page 810: Ip Dhcp-Local Auth Domain
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local auth domain [ no ] ip dhcp-local auth domain domainName Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Specifies a domain name for a username that is locally configured for a DHCP Description standalone mode client.
Page 811: Ip Dhcp-Local Auth Include
Chapter 10: I Commands ip dhcp-local auth include [ no ] ip dhcp-local auth include { circuit-identifier | circuit-type | mac-address | Syntax option82 | virtual-router-name } Command introduced in JUNOSe Release 7.1.0. Release Information Includes optional information as part of the locally configured username for a DHCP Description standalone mode client.
Page 812: Ip Dhcp-Local Auth Password
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local auth password [ no ] ip dhcp-local auth password password Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Assigns a password used to authenticate a locally configured DHCP standalone mode Description client.
Page 813: Ip Dhcp-Local Auth User-Prefix
Chapter 10: I Commands ip dhcp-local auth user-prefix [ no ] ip dhcp-local auth user-prefix userNamePrefix Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Specifies a user prefix for a username that is locally configured for a DHCP standalone Description mode client.
Page 814: Ip Dhcp-Local Auto-Configure Agent-Circuit-Identifier
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local auto-configure agent-circuit-identifier [ no ] ip dhcp-local auto-configure agent-circuit-identifier Syntax Command introduced in JUNOSe Release 7.3.0. Release Information Configures the DHCP local server to support the creation of dynamic subscriber Description interfaces built over dynamic VLANs that are based on the agent-circuit-id option (suboption 1) of the option 82 field in DHCP messages.
Page 815: Ip Dhcp-Local Cable-Modem
Chapter 10: I Commands ip dhcp-local cable-modem [ no ] ip dhcp-local cable-modem dhcp-server ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the IP address of the external DHCP server to which the DHCP local server Description will relay DHCP messages from cable modems.
Page 816: Ip Dhcp-Local Excluded-Address
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local excluded-address [ no ] ip dhcp-local excluded-address ipAddressStart ipAddressStop Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies IP addresses that the DHCP local server should not supply from the default Description address pool because those addresses are already used by devices on the subnet.
Page 817: Ip Dhcp-Local Limit
Chapter 10: I Commands ip dhcp-local limit ip dhcp-local limit Syntax { atm | ethernet | pos | vlan | interface InterfaceType InterfaceSpecifier } value no ip dhcp-local limit [ atm | ethernet | pos | vlan | interface InterfaceType InterfaceSpecifier ] Command introduced before JUNOSe Release 7.1.0.
Page 818: Ip Dhcp-Local Pool
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local pool [ no ] ip dhcp-local pool { poolName | default } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Accesses DHCP Local Pool Configuration mode. The no version prevents the DHCP Description local server from supplying IP addresses from the specified pool.
Page 819: Ip Dhcp-Local Snmptraps
Chapter 10: I Commands ip dhcp-local snmpTraps [ no ] ip dhcp-local snmpTraps Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables DHCP local server SNMP traps. The no version disables DHCP local server Description SNMP traps. Global Configuration Mode ip dhcp-local snmpTraps...
Page 820: Ip Dhcp-Local Unique-Client-Ids
JUNOSe 11.1.x Command Reference Guide A to M ip dhcp-local unique-client-ids [ no ] ip dhcp-local unique-client-ids Syntax Command introduced in JUNOSe Release 8.0.0. Release Information Configures the method that DHCP local server uses when it receives a DHCP Description DISCOVER or REQUEST packet from a client ID or hardware address that matches the client ID or hardware address of a currently bound client on another subnet or subinterface.
Page 821: Ip Dhcp-Server
Chapter 10: I Commands ip dhcp-server ip dhcp-server dhcpServerAddress [ adminStatus ] Syntax no ip dhcp-server [ dhcpServerAddress [ adminStatus ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Adds the IP address of a single DHCP server to the list of DHCP servers from which Description the router can request addresses to allocate to remote users.
Page 822: Ip Directed-Broadcast
JUNOSe 11.1.x Command Reference Guide A to M ip directed-broadcast [ no ] ip directed-broadcast Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables translation of directed broadcast to physical broadcasts. The no version Description disables the function. Interface Configuration, Profile Configuration, Subinterface Configuration Mode ip directed-broadcast...
Page 823: Ip Disable-Forwarding
Chapter 10: I Commands ip disable-forwarding [ no ] ip disable-forwarding Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables forwarding of packets on the SRP Ethernet interface to maintain router Description performance. The no version enables forwarding of packets on the SRP Ethernet interface.
Page 824: Ip Domain-Lookup
JUNOSe 11.1.x Command Reference Guide A to M ip domain-lookup [ no ] ip domain-lookup [ transit-virtual-router vrName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Without the transit-virtual-router option, enables the router to query the configured Description DNS name servers when it needs an IP hostname–to–IP address translation.
Page 825: Ip Domain-Name
Chapter 10: I Commands ip domain-name [ no ] ip domain-name domainName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Defines a default domain name for the clients that a name resolver serves. The no Description version deletes the domain name; that is, the domain name will no longer be appended to hostnames in the static host table.
Page 826: Ip Dos-Protection-Group
JUNOSe 11.1.x Command Reference Guide A to M ip dos-protection-group ip dos-protection-group groupName Syntax no ip dos-protection-group Command introduced in JUNOSe Release 8.1.0. Release Information Attaches an IP denial of service (DoS) protection group to an interface. The no version Description removes the attachment of the DoS protection group from the interface.
Page 827: Ip Dvmrp
Chapter 10: I Commands ip dvmrp [ no ] ip dvmrp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Activates DVMRP on an interface. The no version removes DVMRP from an interface. Description Interface Configuration Mode ip dvmrp...
Page 828: Ip Dvmrp Accept-Filter
JUNOSe 11.1.x Command Reference Guide A to M ip dvmrp accept-filter [ no ] ip dvmrp accept-filter listName1 [ distance ] neighbor-list listName2 Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Filters incoming DVMRP reports in accordance with a standard IP access list. The Description no version disables the filter.
Page 829: Ip Dvmrp Announce-Filter
Chapter 10: I Commands ip dvmrp announce-filter ip dvmrp announce-filter listName Syntax no ip dvmrp announce-filter Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a list of DVMRP routes that the router will advertise on an interface. The Description no version restores the default situation, in which the router advertises all known routes on the interface.
Page 830: Ip Dvmrp Auto-Summary
JUNOSe 11.1.x Command Reference Guide A to M ip dvmrp auto-summary [ no ] ip dvmrp auto-summary Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Summarizes routes automatically on an interface. By default, automatic Description summarization is enabled. The no version disables automatic summarization. Interface Configuration Mode ip dvmrp auto-summary...
Page 831: Ip Dvmrp Disable
Chapter 10: I Commands ip dvmrp disable [ no ] ip dvmrp disable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables DVMRP on an interface without removing the DVMRP configuration. The Description no version reenables the DVMRP configuration on a disabled interface. Interface Configuration Mode ip dvmrp disable...
Page 832: Ip Dvmrp Metric-Offset
JUNOSe 11.1.x Command Reference Guide A to M ip dvmrp metric-offset [ no ] ip dvmrp metric-offset { in | out } [ increment ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Adjusts the number of hops associated with routes passing through an interface. This Description action indicates that the route is more efficient or less efficient than an alternative route.
Page 833: Ip Dvmrp Route-Hog-Notification
Chapter 10: I Commands ip dvmrp route-hog-notification [ no ] ip dvmrp route-hog-notification [ limit ] Syntax limit Number in the range 0–2147483647 Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of DVMRP routes that the router can record before it generates a Description system log warning message.
Page 834: Ip Dvmrp Route-Limit
JUNOSe 11.1.x Command Reference Guide A to M ip dvmrp route-limit [ no ] ip dvmrp route-limit [ limit ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Limits the number of routes that the router can advertise on each interface. The Description default value is 7000.
Page 835: Ip Dvmrp Summary-Address
Chapter 10: I Commands ip dvmrp summary-address [ no ] ip dvmrp summary-address ipAddress mask [ metric cost ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Advertises a DVMRP summary address on the interface. The no version stops the Description advertising of a summary address on an interface.
Page 836: Ip Dvmrp Unicast-Routing
JUNOSe 11.1.x Command Reference Guide A to M ip dvmrp unicast-routing [ no ] ip dvmrp unicast-routing Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the exchange of DVMRP unicast routes on an interface not owned by DVMRP. Description The no version disables the exchange of DVMRP unicast routes on an interface not owned by DVMRP.
Page 837: Ip Dynamic-Interface-Prefix
Chapter 10: I Commands ip dynamic-interface-prefix ip dynamic-interface-prefix [ vrf vrfName ] prefix Syntax no ip dynamic-interface-prefix [ vrf vrfName ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the prefix for the names of dynamic shared IP interfaces created for Description overlapping BGP/MPLS VPNs.
Page 838: Ip Explicit-Path
JUNOSe 11.1.x Command Reference Guide A to M ip explicit-path Syntax Defines an explicit path by name and also enables or disables explicit path routing Description in implementations on routers from other vendors. See the mpls explicit-path command for a complete description and syntax. Global Configuration Mode ip explicit-path...
Page 839: Ip Extcommunity-List
Chapter 10: I Commands ip extcommunity-list ip extcommunity-list listName { permit | deny } Syntax extendedCommunity [ extendedCommunity ]* no ip extcommunity-list listName [ { permit | deny } extendedCommunity [ extendedCommunity ]* ] Command introduced before JUNOSe Release 7.1.0. Release Information Defines an extended-community (extcommunity) list to be referenced in a route Description...
Page 840: Ip Fallback Global
JUNOSe 11.1.x Command Reference Guide A to M ip fallback global [ no ] ip fallback global Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables secondary routing table lookup for an interface in a virtual router forwarding Description table of the parent (global) virtual router if the initial route lookup on a VRF is unsuccessful.
Page 841: Ip Filter-Options All
Chapter 10: I Commands ip filter-options all [ no ] ip filter-options all Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables filtering of packets with IP options on an interface. IP options filtering is Description disabled by default. The no version disables filtering of packets with IP options. Interface Configuration, Profile Configuration Mode Enabling IP Options Filtering...
Page 842: Ip Flow-Aggregation Cache
JUNOSe 11.1.x Command Reference Guide A to M ip flow-aggregation cache [ no ] ip flow-aggregation cache [ as | destination-prefix | prefix | protocol-port | Syntax source-prefix ] Command introduced in JUNOSe Release 8.1.0. Release Information Creates an aggregation cache and accesses Flow Cache Configuration mode. The no Description version removes the aggregation cache and its configuration.
Page 843: Ip Flow-Cache Entries
Chapter 10: I Commands ip flow-cache entries ip flow-cache entries cacheEntries Syntax no ip flow-cache entries Command introduced before JUNOSe Release 7.1.0. Release Information Limits the number of entries in the flow cache (for all line modules in the router). Description The no version sets the number of entries back to its default value.
Page 844: Ip Flow-Cache Timeout
JUNOSe 11.1.x Command Reference Guide A to M ip flow-cache timeout ip flow-cache timeout { active activeTimer | inactive inactiveTimer } Syntax no ip flow-cache timeout { active | inactive } Command introduced before JUNOSe Release 7.1.0. Release Information Defines the J-Flow activity or inactivity timers. The no version restores the default Description value of each timer.
Page 845: Ip Flow-Export
Chapter 10: I Commands ip flow-export [ no ] ip flow-export { hostName | ipAddress } udpPort version 5 Syntax [ peer-as | origin-as ] [ no ] ip flow-export destination { hostName | ipAddress } udpPort [ no ] ip flow-export source interfaceType interfaceSpecifier [ no ] ip flow-export version 5 [ peer-as | origin-as ] Command introduced before JUNOSe Release 7.1.0.
Page 846: Ip Flow-Sampling-Mode Packet-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip flow-sampling-mode packet-interval ip flow-sampling-mode packet-interval intervalValue Syntax no ip flow-sampling-mode packet-interval Command introduced before JUNOSe Release 7.1.0. Release Information Defines the sampling interval for an interface that is running J-Flow. Even though Description each flow is sampled, the flow sample is not necessarily cached because of system constraints.
Page 847: Ip Flow Statistics
Chapter 10: I Commands ip flow statistics [ no ] ip flow statistics Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables J-Flow statistics. The no version disables J-Flow statistics. Description Global Configuration Mode ip flow statistics...
Page 848: Ip Ftp Source-Address
JUNOSe 11.1.x Command Reference Guide A to M ip ftp source-address ip ftp source-address sourceAddress Syntax no ip ftp source-address [ sourceAddress ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an operational interface by IP address as the source interface in FTP packets Description sent via the router's FTP client.
Page 849: Ip Ftp Source-Interface
Chapter 10: I Commands ip ftp source-interface ip ftp source-interface interfaceType interfaceSpecifier Syntax no ip ftp source-interface [ interfaceType interfaceSpecifier ] Command introduced before JUNOSe Release 7.1.0. Release Information Identifies an interface by type and location as the source interface in FTP packets Description sent via the router's FTP client.
Page 850: Ip-Hint
JUNOSe 11.1.x Command Reference Guide A to M ip-hint ip-hint { enable | disable } Syntax no ip-hint Command introduced before JUNOSe Release 7.1.0. Release Information When enabled, the E Series router preallocates an IP address for the remote (B-RAS) Description user before calling authentication.
Page 851: Ip Http
Chapter 10: I Commands ip http [ no ] ip http Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Creates the HTTP local server. The no version deletes the HTTP local server. Description Global Configuration Mode ip http...
Page 852: Ip Http Access-Class
JUNOSe 11.1.x Command Reference Guide A to M ip http access-class ip http access-class listName Syntax no ip http access-class Command introduced in JUNOSe Release 7.2.0. Release Information Specifies the standard IP access list that identifies the subscribers who are authorized Description to connect to the HTTP local server.
Page 853: Ip Http Max-Connection-Time
Chapter 10: I Commands ip http max-connection-time ip http max-connection-time seconds Syntax no ip http max-connection-time Command introduced in JUNOSe Release 7.2.0. Release Information Specifies the maximum time that the HTTP local server maintains an inactive Description connection. The no version restores the default time. seconds Either 0 (unlimited) or the number of seconds in the range 3–7200;...
Page 854: Ip Http Port
JUNOSe 11.1.x Command Reference Guide A to M ip http port ip http port portNumber Syntax no ip http port Command introduced in JUNOSe Release 7.2.0. Release Information Specifies the port on which the HTTP local server receives connection attempts. The Description no version restores the default port number.
Page 855: Ip Http Redirecturl
Chapter 10: I Commands ip http redirectUrl ip http redirectUrl url Syntax no ip http redirectUrl Command introduced in JUNOSe Release 7.2.0. Release Information Specifies the URL to which a subscriber's initial Web browser session is redirected, Description enabling initial provisioning and service selection for the subscriber. The no version removes the redirection action.
Page 856: Ip Http Same-Host-Limit
JUNOSe 11.1.x Command Reference Guide A to M ip http same-host-limit ip http same-host-limit maxConnections Syntax no ip http same-host-limit Command introduced in JUNOSe Release 7.2.0. Release Information Specifies the maximum number of connections that can exist between one IP address Description and the HTTP local server.
Page 857: Ip Http Server
Chapter 10: I Commands ip http server [ no ] ip http server Syntax Command introduced in JUNOSe Release 7.2.0. Release Information Enables the HTTP local server. The no version disables the HTTP local server. Description Global Configuration Mode ip http server...
Page 858: Ip Icmp Update-Source
JUNOSe 11.1.x Command Reference Guide A to M ip icmp update-source ip icmp update-source [ vrf vrfName ] { interfaceType interfaceSpecifier | ipAddress } Syntax no ip icmp update-source [ vrf vrfName ] [ interfaceType interfaceSpecifier | ipAddress ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a unique source address or interface for any ICMP messages that the E Description...
Page 859: Ip Igmp
Chapter 10: I Commands ip igmp [ no ] ip igmp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables IGMP on an interface, and sets the IGMP version to IGMPv2. The no version Description disables IGMP on an interface. Interface Configuration, Profile Configuration Mode ip igmp...
Page 860: Ip Igmp Access-Group
JUNOSe 11.1.x Command Reference Guide A to M ip igmp access-group ip igmp access-group accessListName Syntax no ip igmp access-group Command introduced before JUNOSe Release 7.1.0. Release Information Restricts hosts on this subnet to joining multicast groups on the specified IP access Description list.
Page 861: Ip Igmp Access-Source-Group
Chapter 10: I Commands ip igmp access-source-group ip igmp access-source-group accessListName Syntax no ip igmp access-source-group Command introduced before JUNOSe Release 7.1.0. Release Information Restricts hosts on this subnet to membership in those source-groups (also known as Description “ channels” ) permitted by the specified IP access list. The no version removes any access list restriction.
Page 862: Ip Igmp Apply-Oif-Map
JUNOSe 11.1.x Command Reference Guide A to M ip igmp apply-oif-map ip igmp apply-oif-map mapName Syntax no ip igmp apply-oif-map Command introduced before JUNOSe Release 7.1.0. Release Information Applies the specified outgoing interface (OIF) map to the current interface. The no Description version removes the outgoing interface map association from the interface.
Page 863: Ip Igmp Explicit-Tracking
Chapter 10: I Commands ip igmp explicit-tracking [ no ] ip igmp explicit-tracking [ disable-if-igmp-v2-detected ] Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Enables explicit host tracking for IGMP interfaces. The no version disables explicit Description host tracking on the interface or with the disable-if-igmp-v2-detected keyword reverts to the default explicit host tracking.
Page 864: Ip Igmp Group Limit
JUNOSe 11.1.x Command Reference Guide A to M ip igmp group limit ip igmp group limit groupLimit Syntax no ip igmp group limit Command introduced before JUNOSe Release 7.1.0. Release Information Limits the number of IGMP groups that an interface can accept. The no version Description restores the default situation, in which there is no limit to the number of IGMP groups that the interface accepts.
Page 865: Ip Igmp Immediate-Leave
Chapter 10: I Commands ip igmp immediate-leave [ no ] ip igmp immediate-leave Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Removes an interface immediately when the router receives an leave group Description membership message from the host associated with this interface. The no version restores the default situation, in which the router issues query messages to multicast groups and removes an interface if the associated host does not return a group membership report within a certain length of time.
Page 866: Ip Igmp Last-Member-Query-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip igmp last-member-query-interval ip igmp last-member-query-interval tenthsOfaSecond Syntax no ip igmp last-member-query-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies in tenths of a second the maximum time the router waits for a response Description after sending a last member query.
Page 867: Ip Igmp Oif-Map
Chapter 10: I Commands ip igmp oif-map [ no ] ip igmp oif-map mapName { interfaceType interfaceSpecifier | self } Syntax [ groupPrefix [ sourcePrefix ] ] Command introduced before JUNOSe Release 7.1.0. Release Information Creates an outgoing interface (OIF) map. The no version removes an outgoing Description interface map attribute or the entire outgoing interface map.
Page 868: Ip Igmp Promiscuous
JUNOSe 11.1.x Command Reference Guide A to M ip igmp promiscuous ip igmp promiscuous { on | off } Syntax no ip igmp promiscuous Command introduced before JUNOSe Release 7.1.0. Release Information Enables the specified interface to accept IGMP reports from hosts on any subnet. Description The no version specifies that an IGMP interface should use the Router Configuration mode setting (see the igmp promiscuous command) to determine from which subnets...
Page 869: Ip Igmp-Proxy
Chapter 10: I Commands ip igmp-proxy [ no ] ip igmp-proxy [ version { 2 | 3 } ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables IGMP proxy on an interface and specifies the version. Version 2 is enabled Description by default.
Page 870: Ip Igmp-Proxy Unsolicited-Report-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip igmp-proxy unsolicited-report-interval ip igmp-proxy unsolicited-report-interval tenths-of-a-second Syntax no ip igmp-proxy unsolicited-report-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies how often the upstream interface should transmit unsolicited reports. This Description command has no effect on interfaces other than the upstream value.
Page 871: Ip Igmp-Proxy V1-Router-Present-Time
Chapter 10: I Commands ip igmp-proxy V1-router-present-time ip igmp-proxy V1-router-present-time seconds Syntax no ip igmp-proxy V1-router-present-time Command introduced before JUNOSe Release 7.1.0. Release Information Specifies how long the router assumes that there is an IGMPv1 querier router on the Description subnet after the router receives an IGMP V1 query on this interface.
Page 872: Ip Igmp Querier
JUNOSe 11.1.x Command Reference Guide A to M ip igmp querier [ no ] ip igmp querier Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the interface will act as a querier when you configure IGMPv1 on an Description interface;...
Page 873: Ip Igmp Querier-Timeout
Chapter 10: I Commands ip igmp querier-timeout ip igmp querier-timeout seconds Syntax no ip igmp querier-timeout Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time that the interface waits before declaring itself as the querier. The no Description version restores the default value, twice the query interval.
Page 874: Ip Igmp Query-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip igmp query-interval ip igmp query-interval seconds Syntax no ip igmp query-interval Command introduced before JUNOSe Release 7.1.0. Release Information Sets how often the router sends IGMP host-query packets from this interface. The Description no version restores the default value, 125 seconds.
Page 875: Ip Igmp Query-Max-Response-Time
Chapter 10: I Commands ip igmp query-max-response-time ip igmp query-max-response-time tenthsOfaSecond Syntax no ip igmp query-max-response-time Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the period in tenths of a second during which the host is expected to respond Description to an IGMP query.
Page 876: Ip Igmp Robustness
JUNOSe 11.1.x Command Reference Guide A to M ip igmp robustness ip igmp robustness numberOfMessages Syntax no ip igmp robustness Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the number of times that the router sends IGMP group-specific queries Description before declaring a group to no longer have any members on an interface.
Page 877: Ip Igmp Ssm-Map Enable
Chapter 10: I Commands ip igmp ssm-map enable [ no ] ip igmp ssm-map enable Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SSM mapping on the router. SSM mapping statically assigns sources to Description IGMPv1 and IGMPv2 groups. You must use SSM mapping for IGMPv1 and IGMPv2 hosts to interoperate with PIM SSM.
Page 878: Ip Igmp Ssm-Map Static
JUNOSe 11.1.x Command Reference Guide A to M ip igmp ssm-map static [ no ] ip igmp ssm-map static accessListName sourceAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an access list and source address for use in SSM mapping. SSM mapping Description statically assigns sources to IGMPv1 and IGMPv2 groups.
Page 879: Ip Igmp Static-Exclude
Chapter 10: I Commands ip igmp static-exclude [ no ] ip igmp static-exclude sourceAddress groupAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that an interface not handle multicast traffic for one or more (S,G) Description combinations. The no version removes the (S,G) exclusion from the interface. sourceAddress Address of the source Options groupAddress Address of the group...
Page 880: Ip Igmp Static-Group
JUNOSe 11.1.x Command Reference Guide A to M ip igmp static-group [ no ] ip igmp static-group groupAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Assigns an interface to handle all multicast traffic for a group. The interface sets no Description timers for this group.
Page 881: Ip Igmp Static-Include
Chapter 10: I Commands ip igmp static-include [ no ] ip igmp static-include sourceAddress groupAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Assigns an interface to handle multicast traffic for one or more (S,G) combinations. Description The no version removes the (S,G) association from the interface. sourceAddress Address of the source Options groupAddress Address of the group...
Page 882: Ip Igmp Version
JUNOSe 11.1.x Command Reference Guide A to M ip igmp version ip igmp version { 3 | 2 | 1 | passive } Syntax no ip igmp version Command introduced before JUNOSe Release 7.1.0. Release Information Sets the IGMP version for the interface. The no version restores the default value, Description IGMPv2.
Page 883: Ip Ignore-Df-Bit
Chapter 10: I Commands ip ignore-df-bit [ no ] ip ignore-df-bit Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the router ignores the don't-fragment bit if present in the IP header of Description packets crossing the configured interface; the router then fragments packets even if the bit is present.
Page 884: Ip Inactivity-Timer
JUNOSe 11.1.x Command Reference Guide A to M ip inactivity-timer [ no ] ip inactivity-timer inactiveTime Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an inactivity timer. IP polls the dynamic interface at the configured interval Description to determine whether the interface was active during the interval. Inactive interfaces are deleted only when the period of inactivity is equal to or greater than the configured value.
Page 885: Ip Initial-Sequence-Preference
Chapter 10: I Commands ip initial-sequence-preference ip initial-sequence-preference preference Syntax no ip initial-sequence-preference Command introduced in JUNOSe Release 8.1.0. Release Information Configures the warm restart replay preference for an IP interface after a high Description availability switchover. The no version restores the default value. preference Preference value, 0 or 1;...
Page 886: Ip Interface
JUNOSe 11.1.x Command Reference Guide A to M ip interface no ip interface Syntax This command has only a no version. See the no ip interface command for a complete Description description. Interface Configuration, Subinterface Configuration Mode ip interface...
Page 887: Ip Irdp
Chapter 10: I Commands ip irdp [ no ] ip irdp Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables ICMP Router Discovery Protocol processing on an interface. The no version Description disables IRDP routing. Interface Configuration, Subinterface Configuration Mode ip irdp...
Page 888: Ip Local Alias
JUNOSe 11.1.x Command Reference Guide A to M ip local alias ip local alias aliasName pool-name poolName Syntax [ no ] ip local alias aliasName Command introduced before JUNOSe Release 7.1.0. Release Information Specifies an alias for a local address pool. The no version deletes the alias name. Description aliasName Text string in the range 1–16 characters that defines an alias name Options...
Page 889: Ip Local Pool
Chapter 10: I Commands ip local pool [ no ] ip local pool name [ startIpAddress [ endIpAddress ] ] Syntax [ warning highUtilization abatedUtilization ] [ snmpTrap ] Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the pool name, the starting address, the ending address, group name, the Description utilization threshold, and the SNMP trap flag.
Page 890: Ip Local Pool Snmptrap
JUNOSe 11.1.x Command Reference Guide A to M ip local pool snmpTrap [ no ] ip local pool name snmpTrap Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables SNMP pool utilization traps. The no version disables SNMP pool utilization Description traps.
Page 891: Ip Local Pool Warning
Chapter 10: I Commands ip local pool warning ip local pool name warning highUtilization abatedUtilization [ snmpTrap ] Syntax no ip local pool name warning [ highUtilization abatedUtilization ] Command introduced before JUNOSe Release 7.1.0. Release Information Identifies the warning threshold values. The no version resets the thresholds to their Description default values.
Page 892: Ip Local Shared-Pool
JUNOSe 11.1.x Command Reference Guide A to M ip local shared-pool ip local shared-pool localPoolName dhcpPoolName Syntax no ip local shared-pool localPoolName Command introduced before JUNOSe Release 7.1.0. Release Information Configures a shared local address pool that shares addresses from the specified DHCP Description local server address pool in the same virtual router.
Page 893: Ip Mac-Validate
Chapter 10: I Commands ip mac-validate ip mac-validate [ strict | loose ] Syntax no ip mac-validate Command introduced before JUNOSe Release 7.1.0. Release Information Enables MAC address validation on a per interface basis. When MAC address Description validation is enabled, the router checks the entry in the MAC validation table that corresponds to the IP source address of an incoming packet.
Page 894: Ip Mask-Reply
JUNOSe 11.1.x Command Reference Guide A to M ip mask-reply [ no ] ip mask-reply Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables ICMP netmask reply. The no version disables the feature. Description Interface Configuration, Subinterface Configuration Mode ip mask-reply...
Page 895: Ip Match-Policy-List
Chapter 10: I Commands ip match-policy-list [ no ] ip match-policy-list policyList { permit | deny } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates an IP policy list and launches the policy list configuration mode. The no Description version deletes the policy list.
Page 896: Ip Mirror
JUNOSe 11.1.x Command Reference Guide A to M ip mirror ip mirror mirrorInterfaceType mirrorInterfaceSpecifier Syntax [ analyzerInterfaceType analyzerInterfaceSpecifier [ next-hop nextHop ] ] no ip mirror mirrorInterfaceType mirrorInterfaceSpecifier Command introduced before JUNOSe Release 7.1.0. Release Information Configures the specified interface to mirror all IP ingress and egress traffic, and Description directs the mirrored traffic to an analyzer interface.
Page 897: Ip Mobile Home-Agent
Chapter 10: I Commands ip mobile home-agent ip mobile home-agent [ care-of-access acl ] [ lifetime lifetimeSeconds ] Syntax [ replay replaySeconds ] [ reverse-tunnel-off ] no ip mobile home-agent Command introduced in JUNOSe Release 9.0.0. Release Information Configures the Mobile IP home agent on a virtual router. Issuing this command does Description not affect existing parameters such as lifetime, replay value, or care-of-access ACL for any mobile node's existing binding.
Page 898: Ip Mobile Host
JUNOSe 11.1.x Command Reference Guide A to M ip mobile host user@realm @realm ipAddress Syntax ip mobile host { nai { } [ aaa ] [ care-of-access ] [ lifetime lifetimeSeconds { user@realm @realm ipAddress no ip mobile host { nai Command introduced in JUNOSe Release 9.0.0.
Page 899: Ip Mobile Profile
Chapter 10: I Commands ip mobile profile [ no ] profileName Syntax ip mobile profile Command introduced in JUNOSe Release 9.0.0. Release Information Configures or associates a preconfigured interface profile with the home agent in a Description virtual router. You must configure a mobile profile for every virtual router in which the home agent exists.
Page 900: Ip Mobile Secure Foreign-Agent
JUNOSe 11.1.x Command Reference Guide A to M ip mobile secure foreign-agent ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal | ascii Syntax asciiKeyVal } [ replay timestamp within seconds ] [ algorithm { hmac-md5 | keyed-md5 } ] no ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal | ascii asciiKeyVal } Command introduced in JUNOSe Release 9.0.0.
Page 901: Ip Mobile Secure Host
Chapter 10: I Commands ip mobile secure host ip mobile secure host { nai { user@realm | @realm | @ } | ipAddress } spi spi Syntax key { hex hexKeyVal | ascii asciiKeyVal } [ replay timestamp within seconds ] [ algorithm { hmac-md5 | keyed-md5 } ] no ip mobile secure host { nai { user@realm | @realm } | ipAddress } spi spi key { hex hexKeyVal | ascii asciiKeyVal }...
Page 902 JUNOSe 11.1.x Command Reference Guide A to M Global Configuration Mode ip mobile secure host...
Page 903: Ip Mpls Forwarding-Mode Label-Switched
Chapter 10: I Commands ip mpls forwarding-mode label-switched [ no ] ip mpls forwarding-mode label-switched Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Generates a label for each different FEC that a BGP route points to in a BGP/MPLS Description VPN.
Page 904: Ip Mtu
JUNOSe 11.1.x Command Reference Guide A to M ip mtu [ no ] ip mtu [ mtuSize ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the maximum transmission unit size of IP packets sent on an interface. The no Description version restores the default value.
Page 905: Ip Multicast Admission-Bandwidth-Limit
Chapter 10: I Commands ip multicast admission-bandwidth-limit [ no ] ip multicast admission-bandwidth-limit limitValue Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Specifies multicast admission bandwidth (in kilobits per second) for a given interface. Description The no version removes the admission bandwidth limit. limitValue—Maximum admission bandwidth (in kilobits per second) permitted Options on an interface;...
Page 906: Ip Multicast Ioa-Packet-Replication
JUNOSe 11.1.x Command Reference Guide A to M ip multicast ioa-packet-replication ip multicast ioa-packet-replication interfaceType interfaceSpecifier Syntax no ip multicast ioa-packet-replication Command introduced in JUNOSe Release 7.3.0. Release Information Enables IPv4 hardware multicast packet replication on port 8 of a high-density Description Ethernet I/O module or IOA.
Page 907: Ip Multicast-Routing
Chapter 10: I Commands ip multicast-routing [ no ] ip multicast-routing Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables IP multicast routing on the router. The no version disables IP multicast Description routing on the router. Global Configuration Mode ip multicast-routing...
Page 908: Ip Multicast-Routing Bandwidth-Map
JUNOSe 11.1.x Command Reference Guide A to M ip multicast-routing bandwidth-map ip multicast-routing bandwidth-map routeMapName Syntax no ip multicast-routing bandwidth-map Command introduced in JUNOSe Release 7.1.0. Release Information Enables the QoS adjust function on the router. The no version disables the QoS adjust Description function on the router.
Page 909: Ip Multicast-Routing Disable-Rpf-Check
Chapter 10: I Commands ip multicast-routing disable-rpf-check ip multicast-routing disable-rpf-check ipAccessList Syntax no ip multicast-routing disable-rpf-check Command introduced before JUNOSe Release 7.1.0. Release Information Disables RPF checks for the (S,G) pairs in the specified access list. The no version Description restores the default situation, in which the router performs RPF checks for all (S,G) pairs.
Page 910: Ip Multicast-Routing Permanent-Mroute
JUNOSe 11.1.x Command Reference Guide A to M ip multicast-routing permanent-mroute ip multicast-routing permanent-mroute accessListName Syntax no ip multicast-routing permanent-mroute Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that newly created mroutes that match the specified access list do not get Description timed out.
Page 911: Ip Multipath Round-Robin
Chapter 10: I Commands ip multipath round-robin [ no ] ip multipath round-robin Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies round-robin as the mode for ECMP load sharing on an interface. The no Description version restores the default value, hashed. Subinterface Configuration Mode ip multipath round-robin...
Page 912: Ip Name-Server
JUNOSe 11.1.x Command Reference Guide A to M ip name-server [ no ] ip name-server serverIpAddress [ serverIpAddress ]* Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a DNS name server that the router can query for hostname–to–IP address Description resolution.
Page 913: Ip Nat
Chapter 10: I Commands ip nat [ no ] ip nat { inside | outside } Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Marks interfaces that participate in NAT translation as residing on the inside or the Description outside network.
Page 914: Ip Nat Inside Source List
JUNOSe 11.1.x Command Reference Guide A to M ip nat inside source list ip nat inside source list accessListName pool poolName [ overload ] Syntax no ip nat inside source list accessListName Command introduced before JUNOSe Release 7.1.0. Release Information Creates dynamic translation rules that are applied to a source address when routing Description a packet from the inside network to the outside network, and for translating the...
Page 915: Ip Nat Inside Source Static
Chapter 10: I Commands ip nat inside source static [ no ] ip nat inside source static localIpAddress globalIpAddress Syntax [ no ] ip nat inside source static { tcp | udp } localIpAddress localPort globalIpAddress globalPort Command introduced before JUNOSe Release 7.1.0. Release Information Creates static translations for a source address when routing a packet from the inside Description...
Page 916: Ip Nat Outside Source List
JUNOSe 11.1.x Command Reference Guide A to M ip nat outside source list ip nat outside source list accessListName pool poolName Syntax no ip nat outside source list accessListName Command introduced before JUNOSe Release 7.1.0. Release Information Creates dynamic translation rules that are applied to a source address when routing Description a packet from the outside network to the inside network, and used for translating the destination address when a packet returns to the outside network from the inside...
Page 917: Ip Nat Outside Source Static
Chapter 10: I Commands ip nat outside source static [ no ] ip nat outside source static globalIpAddress localIpAddress Syntax [ no ] ip nat outside source static { tcp | udp } globalIpAddress globalPort localIpAddress localPort Command introduced before JUNOSe Release 7.1.0. Release Information Translates the source address when routing a packet from the outside network to Description...
Page 918: Ip Nat Pool
JUNOSe 11.1.x Command Reference Guide A to M ip nat pool ip nat pool name [ startIpAddress endIpAddress ] Syntax { netmask networkMask | prefix-length length } no ip nat pool name Command introduced before JUNOSe Release 7.1.0. Release Information Creates an address pool from which the NAT router obtains an address when Description performing a dynamic translation.
Page 919: Ip Nat Translation
Chapter 10: I Commands ip nat translation ip nat translation { timeout | udp-timeout | dns-timeout | tcp-timeout | finrst-timeout Syntax |icmp-timeout | gre-timeout } seconds no ip nat translation { timeout | udp-timeout | dns-timeout | tcp-timeout | finrst-timeout | icmp-timeout | gre-timeout} Command introduced before JUNOSe Release 7.1.0.
Page 920: Ip Nat Translation Max-Entries
JUNOSe 11.1.x Command Reference Guide A to M ip nat translation max-entries ip nat translation max-entries maximumEntryNumber Syntax no ip nat translation max-entries Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the maximum number of translation entries per virtual router (that is, Description address bindings, not translation rules) that the translation table can contain in global configuration mode.
Page 921: Ip Nfs
Chapter 10: I Commands ip nfs ip nfs { source-address ipAddress Syntax | source-interface interfaceType interfaceSpecifier } no ip nfs { source-address | source-interface } Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the E Series interface that the current virtual router uses to exchange NFS Description communications with an NFS server.
Page 922: Ip Nfs Host
JUNOSe 11.1.x Command Reference Guide A to M ip nfs host ip nfs host hostName [ user userID [ group groupID ] ] Syntax no ip nfs host hostName Command introduced before JUNOSe Release 7.1.0. Release Information Configures a remote host as an NFS server for the current virtual router. The no Description version disassociates the NFS server from the virtual router.
Page 923: Ip Ospf Authentication-Key
Chapter 10: I Commands ip ospf authentication-key ip ospf authentication-key authKey Syntax no ip ospf authentication-key Command introduced before JUNOSe Release 7.1.0. Release Information Assigns a password used by neighboring routers that are using OSPF simple password Description authentication. The no version deletes the password. authKey Password;...
Page 924: Ip Ospf Authentication Message-Digest
JUNOSe 11.1.x Command Reference Guide A to M ip ospf authentication message-digest [ no ] ip ospf authentication message-digest Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the authentication mode for the interface is MD5. The no version sets Description authentication for the interface to none, but leaves any configured MD5 key intact.
Page 925: Ip Ospf Authentication-None
Chapter 10: I Commands ip ospf authentication-none ip ospf authentication-none Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that no authentication is to be used for the interface. The no version has Description no effect. Interface Configuration, Subinterface Configuration Mode ip ospf authentication-none...
Page 926: Ip Ospf Bfd-Liveness-Detection
JUNOSe 11.1.x Command Reference Guide A to M ip ospf bfd-liveness-detection ip ospf bfd-liveness-detection [ minimum-interval minInterval | Syntax [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ] no ip ospf bfd-liveness-detection Command introduced in JUNOSe Release 7.1.0. Release Information Enables BFD (bidirectional forwarding detection) on an interface running OSPFv2 Description...
Page 927: Ip Ospf Cost
Chapter 10: I Commands ip ospf cost ip ospf cost intfCost Syntax no ip ospf cost Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a cost metric for an interface. Used in the calculation of the SPF routing Description table.
Page 928: Ip Ospf Dead-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip ospf dead-interval ip ospf dead-interval deadInterval Syntax no ip ospf dead-interval Command introduced before JUNOSe Release 7.1.0. Release Information Sets the time period during which the router's neighbors do not see hello packets Description before they declare the router to be down.
Page 929: Ip Ospf Hello-Interval
Chapter 10: I Commands ip ospf hello-interval ip ospf hello-interval helloInterval Syntax no ip ospf hello-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the interval between hello packets that the router sends on the interface. Description The no version resets the hello interval to its default. helloInterval Number in the range 1–65535 seconds;...
Page 930: Ip Ospf Message-Digest-Key Md5
JUNOSe 11.1.x Command Reference Guide A to M ip ospf message-digest-key md5 ip ospf message-digest-key keyID md5 [ 0 | 8 ] msgDigestKey Syntax no ip ospf message-digest-key keyID Command introduced before JUNOSe Release 7.1.0. Release Information Enables OSPF MD5 authentication and configures the MD5 key. The no version Description deletes an MD5 key.
Page 931: Ip Ospf Network
Chapter 10: I Commands ip ospf network ip ospf network { broadcast | non-broadcast | point-to-point } Syntax no ip ospf network Command introduced before JUNOSe Release 7.1.0. Release Information Configures the OSPF network type to something other than the default for the network Description medium.
Page 932: Ip Ospf Priority
JUNOSe 11.1.x Command Reference Guide A to M ip ospf priority ip ospf priority intfPriority Syntax no ip ospf priority Command introduced before JUNOSe Release 7.1.0. Release Information Sets the router priority. Used in determining the designated router for the particular Description network.
Page 933: Ip Ospf Retransmit-Interval
Chapter 10: I Commands ip ospf retransmit-interval ip ospf retransmit-interval retransInterval Syntax no ip ospf retransmit-interval Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the time between LSA retransmissions for the interface when an Description acknowledgment for the LSA is not received. The no version restores the default value.
Page 934: Ip Ospf Shutdown
JUNOSe 11.1.x Command Reference Guide A to M ip ospf shutdown [ no ] ip ospf shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables OSPF on an interface. The no version enables OSPF on the interface. Description Interface Configuration, Subinterface Configuration Mode ip ospf shutdown...
Page 935: Ip Ospf Transmit-Delay
Chapter 10: I Commands ip ospf transmit-delay ip ospf transmit-delay transmDelay Syntax no ip ospf transmit-delay Command introduced before JUNOSe Release 7.1.0. Release Information Sets the estimated time it takes to transmit a link-state update packet on the interface. Description The no version restores the default value.
Page 936: Ip Pim
JUNOSe 11.1.x Command Reference Guide A to M ip pim In Interface Configuration mode: Syntax [ no ] ip pim [ dense-mode | sparse-mode | sparse-dense-mode ] In Profile Configuration mode: [ no ] ip pim [ sparse-mode | sparse-dense-mode ] Command introduced before JUNOSe Release 7.1.0.
Page 937: Ip Pim Bfd-Liveness-Detection
Chapter 10: I Commands ip pim bfd-liveness-detection ip pim bfd-liveness-detection [ minimum-interval minInterval | Syntax [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ] no ip pim bfd-liveness-detection Command introduced in JUNOSe Release 8.0.0. Release Information Enables BFD (bidirectional forwarding detection) on an interface running PIM and Description defines BFD values to be negotiated between PIM neighbors for detection of IP data...
Page 938: Ip Pim Bsr-Candidate
JUNOSe 11.1.x Command Reference Guide A to M ip pim bsr-candidate ip pim bsr-candidate interfaceType interfaceSpecifier Syntax [ hashMaskLen [ priority priority ] ] [ period bootstrapPeriod ] no ip pim bsr-candidate Command introduced before JUNOSe Release 7.1.0. Release Information Defines a router as a bootstrap router (BSR) candidate.
Page 939: Ip Pim Data-Mdt
Chapter 10: I Commands ip pim data-mdt [ no ] ip pim data-mdt Syntax Command introduced in JUNOSe Release 8.2.0. Release Information Activates data MDTs and enters IP PIM Data MDT Configuration mode. The no version Description deactivates data MDTs. Global Configuration Mode ip pim data-mdt...
Page 940: Ip Pim Dr-Priority
JUNOSe 11.1.x Command Reference Guide A to M ip pim dr-priority ip pim dr-priority priority Syntax no ip pim dr-priority Command introduced in JUNOSe Release 9.0.0. Release Information Router Configuration mode added in JUNOSe Release 10.0.0. Assigns a priority for the interface to be selected as the designated router. An interface Description with a higher priority value is preferred as a designated router over an interface with a lower priority value.
Page 941: Ip Pim Group-Address-Pool
Chapter 10: I Commands ip pim group-address-pool ip pim group-address-pool poolName groupAddressMinimum groupAddressMaximum Syntax no ip pim group-address-pool poolName Command introduced in JUNOSe Release 8.2.0. Release Information Configures PIM group address pools from which data MDT group addresses are Description allocated.
Page 942: Ip Pim Join-Filter
JUNOSe 11.1.x Command Reference Guide A to M ip pim join-filter ip pim join-filter accessListName Syntax no ip pim join-filter Command introduced before JUNOSe Release 7.1.0. Release Information Profile Configuration mode added in JUNOSe Release 8.2.0. Specifies an extended access list that you want this PIM interface to use as a join Description filter.
Page 943: Ip Pim Join-Prune-Interval
Chapter 10: I Commands ip pim join-prune-interval ip pim join-prune-interval interval Syntax no ip pim join-prune-interval Command introduced in JUNOSe Release 10.0.0. Release Information Specifies the time interval at which the router sends the PIM join/prune message to Description the upstream RPF neighbor. In Interface Configuration mode, the no version restores the value that is specified in Router Configuration mode.
Page 944: Ip Pim Query-Interval
JUNOSe 11.1.x Command Reference Guide A to M ip pim query-interval ip pim query-interval queryTime Syntax no ip pim query-interval Command introduced before JUNOSe Release 7.1.0. Release Information Profile Configuration mode added in JUNOSe Release 8.2.0. Specifies how often the router sends PIM router query messages from this interface. Description The no version specifies the default time interval, 30 seconds.
Page 945: Ip Pim Rp-Address
Chapter 10: I Commands ip pim rp-address [ no ] ip pim rp-address ipAddress [ ipAccessList ] [ override ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a static PIM group–to–RP mapping. The no version clears the mapping Description from this interface.
Page 946: Ip Pim Rp-Candidate
JUNOSe 11.1.x Command Reference Guide A to M ip pim rp-candidate ip pim rp-candidate interfaceType interfaceSpecifier [ group-list accessListName ] Syntax [ hold-time holdTime ] [ priority priority ] [ interval interval ] no ip pim rp-candidate interfaceType interfaceSpecifier Command introduced before JUNOSe Release 7.1.0. Release Information Defines a router as a rendezvous point (RP) router candidate.
Page 947: Ip Pim Send-Rp-Announce
Chapter 10: I Commands ip pim send-rp-announce ip pim send-rp-announce interfaceType interfaceSpecifier scope ttl Syntax [ group-list ipAccessList] [ interval seconds ] no ip pim send-rp-announce interfaceType interfaceSpecifier [ scope ttl ] [ group-list ipAccessList ] [ interval seconds ] Command introduced before JUNOSe Release 7.1.0.
Page 948: Ip Pim Send-Rp-Discovery Scope
JUNOSe 11.1.x Command Reference Guide A to M ip pim send-rp-discovery scope ip pim send-rp-discovery scope ttl [ interfaceType interfaceSpecifier ] Syntax no ip pim send-rp-discovery Command introduced before JUNOSe Release 7.1.0. Release Information Configures the router as an RP mapping agent, which records RP-to-group mappings Description and notifies PIM DRs about the mappings.
Page 949: Ip Pim Sparse-Mode Graceful-Restart-Duration
Chapter 10: I Commands ip pim sparse-mode graceful-restart-duration ip pim sparse-mode graceful-restart-duration seconds Syntax no ip pim sparse-mode graceful-restart-duration Command introduced in JUNOSe Release 8.1.0. Release Information Sets duration time for IP PIM sparse-mode graceful restart. The no version resets the Description duration to the default.
Page 950: Ip Pim Spt-Threshold
JUNOSe 11.1.x Command Reference Guide A to M ip pim spt-threshold [ no ] ip pim spt-threshold { 0 | nonzero_integer | infinity } [ group-list ipAccessList Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the network configuration that PIM sparse mode uses when a source starts Description sending multicast messages.
Page 951: Ip Pim Ssm
Chapter 10: I Commands ip pim ssm ip pim ssm [ default | range ipAccessList ] Syntax no ip pim ssm Command introduced before JUNOSe Release 7.1.0. Release Information Enables SSM and defines the SSM range of IP multicast addresses. The no version Description disables SSM on the router.
Page 952: Ip Policy
JUNOSe 11.1.x Command Reference Guide A to M ip policy For standard policy lists in Interface Configuration mode: Syntax ip policy { input | output | secondary-input } policyName [ statistics { enabled [ baseline { enabled | disabled } ] [ preserve | merge ] | disabled [ merge ] } | merge ] no ip policy { input | output | secondary-input } [ policyName ] For secure policy lists in Interface Configuration mode:...
Page 953 Chapter 10: I Commands input Applies policy to data arriving at this interface before a route lookup Options output Applies policy to data leaving this interface secondary-input Applies policy to data that arrives at this interface after a route lookup secure-input Applies secure policy to data arriving at this interface secure-output Applies secure policy to data leaving this interface NOTE: The ip policy command used with the secure-input and secure-output...
Page 954: Ip Policy-List
JUNOSe 11.1.x Command Reference Guide A to M ip policy-list [ no ] ip policy-list policyName Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Creates or modifies an IP policy list. If you execute an ip policy-list command and Description type exit, the router creates a policy list with no rules, the default.
Page 955: Ip Policy-Parameter Hierarchical
Chapter 10: I Commands ip policy-parameter hierarchical ip policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc | atm-vp Syntax vpValue | ethernet | fr-vc | forwarding | ppp-interface | svlan svlanValue | vlan } no ip policy-parameter parameterName Command introduced in JUNOSe Release 8.0.0. Release Information ppp-interface keyword added in JUNOSe Release 10.3.0.
Page 956: Ip Policy-Parameter Reference-Rate
JUNOSe 11.1.x Command Reference Guide A to M ip policy-parameter reference-rate In Interface Configuration mode: Syntax ip policy parameter reference-rate parameterName [ increase ] value no ip policy-parameter reference-rate parameterName [ increase value ] In Profile Configuration mode: ip policy parameter reference-rate parameterName [ increase ] value no ip policy-parameter reference-rate parameterName Command introduced in JUNOSe Release 8.1.0.
Page 957: Ip Prefix-List
Chapter 10: I Commands ip prefix-list ip prefix-list listName { description desc | Syntax [ seq sequence ] { permit | deny } ipPrefix [ ge geNumber ] [ le leNumber ] } no ip prefix-list listName [ description | [ seq sequence ] [ { permit | deny } ipPrefix [ ge geNumber ] [ le leNumber ] ] ] Command introduced before JUNOSe Release 7.1.0.
Page 958: Ip Prefix-Tree
JUNOSe 11.1.x Command Reference Guide A to M ip prefix-tree ip prefix-tree treeName { description desc | { permit | deny } ipPrefix } Syntax no ip prefix-tree treeName [ description | { permit | deny } ipPrefix ] Command introduced before JUNOSe Release 7.1.0. Release Information Creates a prefix tree for best-match route filtering;...
Page 959: Ip Profile
Chapter 10: I Commands ip profile ip profile profileName Syntax no ip profile Command introduced in JUNOSe Release 7.3.0. Release Information Specifies the IP profile that the IPSec layer passes on to the IP layer upon request for Description upper-layer instantiation. The no version removes the association with this profile. profileName Name of the profile that you want the IPSec layer to pass to the Options IP layer upon request for upper-layer instantiation...
Page 960: Ip Proxy-Arp
JUNOSe 11.1.x Command Reference Guide A to M ip proxy-arp ip proxy-arp [ restricted | unrestricted ] Syntax no ip proxy-arp Command introduced before JUNOSe Release 7.1.0. Release Information Enables proxy ARP on an Ethernet or bridge1483 interface. Proxy ARP is enabled Description by default.
Page 961: Ip Re-Authenticate-Auto-Detect Ip-Subscriber
Chapter 10: I Commands ip re-authenticate-auto-detect ip-subscriber ip re-authenticate-auto-detect ip-subscriber Syntax no ip re-authenticate-auto-detect ip-subscriber Command introduced in JUNOSe Release 10.0.0. Release Information Re-authenticates the auto-detected subscribers (dynamic subscriber interfaces) created Description on static and dynamic IP subscriber interfaces using the DHCP options dhcp-options, dhcp-gi-address, and dhcp-mac-address when the DHCP external application manages the subscriber addresses following a cold boot.
Page 962: Ip Redirects
JUNOSe 11.1.x Command Reference Guide A to M ip redirects [ no ] ip redirects Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the sending of redirect messages if the software is forced to resend a packet Description through the same interface on which it was received.
Page 963: Ip Refresh-Route
Chapter 10: I Commands ip refresh-route ip refresh-route [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Reinstalls routes removed from the IP routing table by the clear ip route command. Description There is no no version. vrfName Name of the VRF;...
Page 964: Ip Rip
JUNOSe 11.1.x Command Reference Guide A to M ip rip [ no ] ip rip Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures RIP to run on the network specified by the network command. Uses the Description default values: send version is RIP version 1, receive version is RIP version 1 and version 2, authentication is not enabled.
Page 965: Ip Rip Authentication Key
Chapter 10: I Commands ip rip authentication key ip rip authentication key [ 0 | 8 ] authkey Syntax no ip rip authentication key Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the password for text authentication and the key for MD5 authentication. Description The no version clears the key for the interface.
Page 966: Ip Rip Authentication Mode
JUNOSe 11.1.x Command Reference Guide A to M ip rip authentication mode ip rip authentication mode { text | md5 keyID } Syntax no ip rip authentication mode Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the type of authentication used on this interface. The no version removes Description authentication from the interface.
Page 967: Ip Rip Bfd-Liveness-Detection
Chapter 10: I Commands ip rip bfd-liveness-detection ip rip bfd-liveness-detection [ minimum-interval minInterval | Syntax [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ] no ip rip bfd-liveness-detection Command introduced in JUNOSe Release 8.0.0. Release Information Enables BFD (bidirectional forwarding detection) on an interface running RIP and Description defines BFD values to be negotiated between peers for detection of IP data path...
Page 968: Ip Rip Copy-To-Dynamic
JUNOSe 11.1.x Command Reference Guide A to M ip rip copy-to-dynamic [ no ] ip rip copy-to-dynamic Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables RIP on dynamic, unnumbered IP interfaces. You cannot configure RIP on Description dynamic interfaces directly. However, this command allows dynamic, unnumbered interfaces (that refer to numbered IP interface for configuration data) to obtain RIP attributes from the numbered IP interface to which they refer.
Page 969: Ip Rip Receive Version
Chapter 10: I Commands ip rip receive version ip rip receive version { 1 | 2 | 1 2 | 2 1 | off } Syntax no ip rip receive version Command introduced before JUNOSe Release 7.1.0. Release Information Restricts the RIP version that the router can receive on an interface. The no version Description sets the interface back to the default value, receiving both RIP version 1 and version 1 Specifies RIP version 1 only...
Page 970: Ip Rip Send Version
JUNOSe 11.1.x Command Reference Guide A to M ip rip send version ip rip send version { 1 | 2 | 1 2 | 2 1 | off } Syntax no ip rip send version Command introduced before JUNOSe Release 7.1.0. Release Information Restricts the RIP version that the router can send on an interface.
Page 971: Ip Route
Chapter 10: I Commands ip route ip route [ vrf vrfName ] { ipAddress ipMask { ipNextHop Syntax [ interfaceType interfaceSpecifier ] | interfaceType interfaceSpecifier } } [ distance ] [ tag tagVal ] [ permanent ] [ verify rtr rtrIndex [ last-resort ] ] [ verify bfd-liveness-detection [ minimum-interval minInterval | [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] ] [ multiplier multValue ]...
Page 972 JUNOSe 11.1.x Command Reference Guide A to M last-resort Installs the static route in the routing table even if the specified RTR operation is currently unreachable, provided that no other static route to the same network prefix is available verify bfd-liveness-detection Installs the static route in the routing table only if the next hop to the specified destination address is verifiable by means of BFD liveness detection minInterval Minimum proposed transmit interval and required receive interval...
Page 973: Ip Route-Cache Flow Sampled
Chapter 10: I Commands ip route-cache flow sampled [ no ] ip route-cache flow sampled Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Profile Configuration mode added in JUNOSe Release 7.2.0. Enables J-Flow statistics on an interface. The no version disables J-Flow statistics on Description the interface.
Page 974: Ip Route-Map Ip-Subscriber
JUNOSe 11.1.x Command Reference Guide A to M ip route-map ip-subscriber ip route-map ip-subscriber routeMapName Syntax no ip route-map ip-subscriber Command introduced before JUNOSe Release 7.1.0. Release Information Configures an interface for route-map processing and specifies the route map that Description is applied to the IP interface subscriber.
Page 975: Ip Route-Type
Chapter 10: I Commands ip route-type For BGP: Syntax ip route-type [ unicast | both ] no ip route-type For IS-IS, OSPF, and RIP: ip route-type [ unicast | multicast | both ] no ip route-type Command introduced before JUNOSe Release 7.1.0. Release Information Specifies whether BGP, IS-IS, OSPF, or RIP routes are available only for unicast Description...
Page 976: Ip Router-Id
JUNOSe 11.1.x Command Reference Guide A to M ip router-id [ no ] ip router-id [ vrfName ] ipAddress Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Establishes the IP address of a router. The no version removes the IP address Description assignment.
Page 977: Ip Router Isis
Chapter 10: I Commands ip router isis [ no ] ip router isis [ tag ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures an IS-IS routing process for IP on an interface. The no version disables Description IS-IS for IP on the interface.
Page 978: Ip-Router-Name
JUNOSe 11.1.x Command Reference Guide A to M ip-router-name [ no ] ip-router-name [ vrName ] Syntax Command introduced in JUNOSe Release 9.0.0. Release Information Assigns an IPv4 virtual router. The no version restores the default router. Description NOTE: This command replaces the deprecated router-name command, which may be removed completely in a future release.
Page 979: Ip Rpf-Route
Chapter 10: I Commands ip rpf-route ip rpf-route ipAddress addressMask Syntax { nextHopIpAddress | nextHopInterfaceType nextHopInterfaceSpecifier } [ distanceValue ] [ tag tagValue ] [ no ] ip rpf-route ipAddress addressMask Command introduced before JUNOSe Release 7.1.0. Release Information Customizes static routes that the router can use to verify source addresses in multicast Description packets.
Page 980: Ip Rsvp Authentication
JUNOSe 11.1.x Command Reference Guide A to M ip rsvp authentication [ no ] { ip | mpls } rsvp authentication Syntax Enables MD5 authentication on the RSVP interface in implementations on routers Description from other vendors. See the mpls rsvp authentication command for a complete description and syntax.
Page 981: Ip Rsvp Authentication Key
Chapter 10: I Commands ip rsvp authentication key { ip | mpls } rsvp authentication [ key authkey ] Syntax no { ip | mpls } rsvp authentication [ key [ authkey ] ] Assigns a key for MD5 authentication between RSVP peers in implementations on Description routers from other vendors.
Page 982: Ip Rsvp Bandwidth
JUNOSe 11.1.x Command Reference Guide A to M ip rsvp bandwidth { ip rsvp | mpls } bandwidth bandwidth Syntax no { ip rsvp | mpls } bandwidth Specifies the total bandwidth reservable on the interface in a non–E Series Description implementation.
Page 983: Ip Rsvp Bfd-Liveness-Detection
Chapter 10: I Commands ip rsvp bfd-liveness-detection { ip | mpls } rsvp bfd-liveness-detection [ minimum-interval minInterval | Syntax [ minimum-receive-interval minRecInterval ] [ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ] no { ip | mpls } rsvp bfd-liveness-detection Enables BFD (bidirectional forwarding detection) on an interface running RSVP-TE Description and defines BFD values to be negotiated between RSVP-TE neighbors for detection...
Page 984: Ip Rsvp Signalling Hello
JUNOSe 11.1.x Command Reference Guide A to M ip rsvp signalling hello { ip | mpls } rsvp signalling hello Syntax [ refresh { interval helloInterval | misses helloMisses } ] { no | default } { ip | mpls } rsvp signalling hello Turns on or configures RSVP-TE hello support.
Page 985: Ip Sa-Validate
Chapter 10: I Commands ip sa-validate [ no ] ip sa-validate Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables source address validation on an interface. This feature verifies that a packet Description has been sent from a valid source address. When a packet arrives on an interface, the router performs a routing table lookup using the source address.
Page 986: Ip Sa-Validate Trap-Enable
JUNOSe 11.1.x Command Reference Guide A to M ip sa-validate trap-enable [ no ] ip sa-validate [ vrf vrfName ] trap-enable Syntax Command introduced in JUNOSe Release 7.1.0. Release Information Enables the generation of source address validation failure traps. The no version Description disables the generation of source address validation failure traps.
Page 987: Ip Service-Profile
Chapter 10: I Commands ip service-profile ip service-profile profileName Syntax no ip service-profile Command introduced before JUNOSe Release 7.1.0. Release Information Specifies a service profile used in the route map and enters Service Profile Description configuration mode. The no version deletes the profile. profileName Name of service profile Options Global Configuration...
Page 988: Ip Share-Interface
JUNOSe 11.1.x Command Reference Guide A to M ip share-interface ip share-interface interfaceType interfaceSpecifier Syntax no ip share-interface Command introduced before JUNOSe Release 7.1.0. Release Information Specifies the layer 2 interface that an IP interface will share in the current virtual Description router.
Page 989: Ip Share-Nexthop
Chapter 10: I Commands ip share-nexthop ip share-nexthop ipAddress [ virtual-router vrName ] Syntax no ip share-nexthop Command introduced before JUNOSe Release 7.1.0. Release Information Specifies that the shared IP interface dynamically tracks a next hop for the specified Description destination.
Page 990: Ip Shutdown
JUNOSe 11.1.x Command Reference Guide A to M ip shutdown [ no ] ip shutdown Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Shuts down an IP interface. The no version restarts the interface. Description Interface Configuration, Subinterface Configuration Mode ip shutdown...
Page 991: Ip Source-Prefix
Chapter 10: I Commands ip source-prefix [ no ] ip source-prefix ipAddress ipAddressMask deny Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Configures a subscriber interface or a primary IP interface that is enabled for dynamic Description creation of subscriber interfaces to demultiplex traffic with the specified IP address and mask.
Page 992: Ip Source-Route
JUNOSe 11.1.x Command Reference Guide A to M ip source-route [ no ] ip source-route [ vrf vrfName ] Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables the forwarding of source-routed packets in a VR or VRF. The no version Description disables forwarding.
Page 993: Ip Speed
Chapter 10: I Commands ip speed [ no ] ip speed adminSpeed Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Sets the speed of an IP interface in bits per second. The no version restores the Description default value, 0 bps. adminSpeed Speed of the interface in bps in the range 1–4294967295 Options Interface Configuration, Subinterface Configuration...
Page 994: Ip Split-Horizon
JUNOSe 11.1.x Command Reference Guide A to M ip split-horizon [ no ] ip split-horizon Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Enables split horizon, preventing the RIP router from advertising routes from the Description interface originating the route, reducing the possibility of routing loops; this is the default condition.
Page 995: Ip Ssh Authentication-Retries
Chapter 10: I Commands ip ssh authentication-retries ip ssh authentication-retries retryLimit Syntax no ip ssh authentication-retries Command introduced before JUNOSe Release 7.1.0. Release Information Sets the number of times that a user can retry a failed authentication (such as trying Description to correct a wrong password) before the server terminates the connection.
Page 996: Ip Ssh Crypto
JUNOSe 11.1.x Command Reference Guide A to M ip ssh crypto ip ssh crypto [ client-to-server | server-to-client ] [ no | default ] cipherAlgorithm Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Adds an encryption algorithm to the specified list of supported algorithms. The no Description version removes or excludes an algorithm from the specified list.
Page 997: Ip Ssh Disable-User-Authentication
Chapter 10: I Commands ip ssh disable-user-authentication [ no ] ip ssh disable-user-authentication Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Disables RADIUS password authentication, resulting in the acceptance of all SSH Description clients that pass protocol negotiation. The no version restores RADIUS authentication. Global Configuration Mode ip ssh disable-user-authentication...
Page 998: Ip Ssh Mac
JUNOSe 11.1.x Command Reference Guide A to M ip ssh mac ip ssh mac [ client-to-server | server-to-client ] [ no | default ] macAlgorithm Syntax Command introduced before JUNOSe Release 7.1.0. Release Information Adds a MAC algorithm to the specified list of supported algorithms. The no version Description removes or excludes an algorithm from the specified list.
Page 999: Ip Ssh Sleep
Chapter 10: I Commands ip ssh sleep ip ssh sleep sleepPeriod Syntax no ip ssh sleep Command introduced before JUNOSe Release 7.1.0. Release Information Sets a sleep period in seconds for users that have exceeded the authentication retry Description limit. Connection attempts from the user at the same host are denied until this period expires.
Page 1000: Ip Ssh Timeout
JUNOSe 11.1.x Command Reference Guide A to M ip ssh timeout ip ssh timeout timeout Syntax no ip ssh timeout Command introduced before JUNOSe Release 7.1.0. Release Information Sets a timeout period in seconds. The SSH server terminates the connection if protocol Description negotiation including user authentication is not complete within this timeout.
Page 1001: Ip Ssh User-Authentication-Protocol
Chapter 10: I Commands ip ssh user-authentication-protocol ip ssh user-authentication-protocol protocol Syntax no ip ssh user-authentication-protocol Command introduced in JUNOSe Release 10.2.0. Release Information Configures the SSH user authentication protocol. E Series routers support RADIUS Description and TACACS+ user authentication protocols. The no version restores the SSH user authentication protocol to the default, RADIUS.

This manual is also suitable for:

Junose 11.1.x