Domain-Name - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

domain-name

From DHCP Local Pool Configuration mode:
Syntax
domain-name domainName
no domain-name
From IPSec Identity Configuration mode:
[ no ] domain-name domainName
Command introduced before JUNOSe Release 7.1.0.
Release Information
From DHCP Local Pool Configuration mode, specifies a domain name that can be
Description
returned to the subscriber of an address pool if requested. The no version removes
the association between the address pool and the domain name.
From IPSec Identity mode, specifies the domain name that the router uses in IKE
authentication messages and to generate certificate requests. The no version removes
the domain name.
Options
DHCP Local Pool Configuration, IPSec Identity Configuration
Mode
domainName Name of the domain
domainName Name used in certificate requests and in IKE authentication
messages; up to 60 characters
Chapter 5: D Commands
543
domain-name