Description - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

description

description name
Syntax
no description
Command introduced before JUNOSe Release 7.1.0.
Release Information
In Controller Configuration mode, assigns a text description or an alias to a CT3, E3,
Description
T3, or SONET/SDH interface. Use the show controllers e3, show controllers sonet,
show controllers t1, or mpls rsvp disable command to display the description. The
no version removes the description or alias.
In VRF Configuration mode, assigns a text description or an alias to the VRF. The no
version removes the description or alias.
NOTE: In Interface Configuration mode, this command has been replaced by the ip
description command for assigning a description to a static IP interface. This
command may be removed completely from Interface Configuration mode in a future
release.
Options
Controller Configuration, Interface Configuration, VRF Configuration
Mode
name Text string or alias of up to 256 characters (in Interface Configuration
mode) or up to 80 characters (in Controller Configuration mode and VRF
Configuration mode)
Chapter 5: D Commands
509
description