clock summer-time date
clock summer-time name date { startDay startMonth | startMonth startDay }
Syntax
startYear startTime { stopDay stopMonth | stopMonth stopDay }
stopYear stopTime [ dstOffset ]
no clock summer-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the router to automatically switch to summer time (Daylight Saving Time DST).
Description
It should start on the first specific date listed in the command and end on the second
specific date in the command. The no version configures the software so that it does
not automatically switch to summer time.
Options
Global Configuration
Mode
name Name of the time zone (for example, PDT) to be displayed when daylight
saving (summer) time is in effect
date Indicates that summer time should start on the first specific date listed in
the command and end on the second specific date in the command
startDay DST start day (1–31)
startMonth DST start month (January, February, ...)
startYear DST start year (2000, 2001, ...)
startTime DST start time (24-hour format) in hours and minutes (hh:mm)
stopDay DST stop day
stopMonth DST stop month
stopYear DST stop year
stopTime DST stop time (24-hour format)
dstOffset Number of minutes to add during summer time in the range 1–1440;
default = 60
Chapter 4: C Commands
clock summer-time date
439