Ip Vrrp Virtual-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip vrrp virtual-address

ip vrrp vrid virtual-address { auto | ipAddress ipAddress [ ipAddress ipAddress ]* }
Syntax
no ip vrrp vrid virtual-address [ ipAddress ipAddress ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Associates an IP address with a VRID. The no version removes a list of IP addresses
Description
associated with a VRID. The no version clears the auto flag, if auto addresses are
being used. There is no default.
Options
Interface Configuration
Mode
990
ip vrrp virtual-address
vrid VRID identifier; a number in the range 1–255
ipAddress IP address
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line